Lightolier C6A120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit designed for both dry or plaster ceilings. It features a steel housing with a matte black finish and an aluminum top cover. The AirSeal® housing minimizes air leakage to less than 2CFM at 1.57 PSF (or 75pa), making it suitable for use in areas where energy efficiency is a concern. The die-cast aluminum mounting frame securely locks into position along the length of the mounting bars, which can be adjusted to accommodate joist spacing from 16" to 24" O.C.
Lightolier C6A120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit designed for both dry or plaster ceilings. It features a steel housing with a matte black finish and an aluminum top cover. The AirSeal® housing minimizes air leakage to less than 2CFM at 1.57 PSF (or 75pa), making it suitable for use in areas where energy efficiency is a concern. The die-cast aluminum mounting frame securely locks into position along the length of the mounting bars, which can be adjusted to accommodate joist spacing from 16" to 24" O.C.
Lightolier C6A120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit designed for both dry or plaster ceilings. It features a steel housing with a matte black finish and an aluminum top cover. The AirSeal® housing minimizes air leakage to less than 2CFM at 1.57 PSF (or 75pa), making it suitable for use in areas where energy efficiency is a concern. The die-cast aluminum mounting frame securely locks into position along the length of the mounting bars, which can be adjusted to accommodate joist spacing from 16" to 24" O.C.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI