Extron DTP2 R 212 Series User manual

User Guide

DTP2R212 Series

DTP Systems

HDMI DTP2 Receiver and Switcher with Audio De-Embedding

68-2986-01 Rev. A

09 20

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses

Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und

die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in der im

Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise

zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di importanti istruzioni di funzionamento e

manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

I



Copyright

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks(

®

), registered service marks(

SM

), and trademarks(

TM

) are the property of RGBSystems, Inc. or Extron

(see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

®

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free, Global

Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NAV, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,

XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-RATEFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD

Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom

HelpDesk, MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent,

Scope-Trigger, ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare,

XTRA, and ZipCaddy

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause interference. This interference must be corrected at

the expense of the user.

ATTENTION:

• The Twisted Pair Extension technology works with unshielded twisted pair (UTP)

or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE

compliance, STP cables and STP Connectors are required.

• La technologie extension paires torsadées fonctionne avec les câbles paires

torsadées blindées(UTP) ou non blindées(STP). Aﬁn de s’assurer de la

compatibilité entre FCC ClasseA et CE, les câbles STP et les connecteurs STP

sont nécessaires.

NOTES:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: Potential risk of severe injury or death.

AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

E X! *X1&* X2)* X2#* X2! CE}

NOTE: For commands and examples of computer or device responses mentioned

in this guide, the character “0” is used for the number zero and “O” is the capital

letter “o.”

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viiDTP2 R 212 Series • Contents

Contents

Introduction ................................................1

About this Guide .................................................. 1

About the DTP2R212 ........................................ 1

Features ............................................................. 2

Application Diagrams ........................................... 5

Installation .................................................. 7

Installation Overview ............................................ 7

Rear Panel Features ............................................ 8

Wiring Connections ........................................... 12

Power Connector .......................................... 12

LAN Connector Wiring ................................... 14

TP Connector and

Cable Recommendations ............................. 14

Analog Audio Output Connector .................... 15

Display and Remote RS‑232 Control ............. 16

Remote Control (SA models only) .................. 16

Over DTP2 RS‑232 and IR Control ................ 17

LockIt Lacing Brackets ...................................... 18

Operation.................................................. 19

Front Panel Features .......................................... 19

Operations......................................................... 20

Powering on the Receiver .............................. 20

Selecting an Input .......................................... 20

Front Panel Lockout (Executive Mode) ........... 21

Connecting to the USB Port .............................. 21

Conﬁguration ..................................................... 23

Enabling Auto‑Input Switching ....................... 23

EDID Minder .................................................. 23

HDCP ............................................................ 24

Audio Configuration ....................................... 24

Conﬁguration Software .............................25

Software Installation........................................... 25

Connecting to PCS ............................................ 26

Opening PCS ................................................ 26

Software Overview ............................................. 27

PCS Device Menu ......................................... 27

Software Menu .............................................. 28

Updating Firmware ............................................ 31

Downloading DTP2R212 Firmware .............. 31

Uploading Firmware to the Switcher .............. 32

SIS Commands ......................................... 35

Using Simple Instruction Set (SIS) Commands ... 35

Host‑to‑switcher Communications ................ 35

Switcher‑initiated Messages .......................... 35

Password Messages ..................................... 36

Error Responses ............................................ 36

Timeout ......................................................... 37

Unsolicited Responses .................................. 37

Using the Command and Response Table ..... 37

Symbol Deﬁnitions ............................................. 38

Command and Response Table for

SIS Commands ............................................... 43

Command and Response Table for

CEC Communications SIS Commands ............ 53

Internal Web Page ..................................... 55

Accessing the Internal Web Page ...................... 55

Disabling Compatibility Mode ......................... 56

Web Page Panels .............................................. 56

Device Info Panel ........................................... 57

Device Status Panel ....................................... 57

Network Settings Panel ................................. 58

Firmware Panel .............................................. 59

Roles and Permissions Panel ......................... 60

DTP2 R 212 Series • Contents viii

Mounting .................................................. 61

Mounting the DTP2R212 ................................. 61

Tabletop Use ................................................. 61

Rack Mounting .............................................. 61

Furniture Mounting......................................... 61

DTP2 R 212 Series • Introduction 1

Introduction

This section gives an overview of the Extron DTP2R 212 and DTP2 R 212 SA switching

receivers. Topics include:

• About this Guide

• About the DTP2R212

• Features

• Application Diagrams

About this Guide

This guide describes the DTP2R212 and DTP2R212 SA two‑input switching receivers

and provides instructions on how to install, configure, and operate them. The DTP2R212

switches and extends signals up to 330 feet (100 meters).

Details regarding configurating and operating the receivers through the Extron Product

Configuration Software (PCS) can be found in the DTP2R212 PCS Help File available after

you’ve opened up PCS (see PCS Device Menu on page27).

In this guide, the DTP2R212 and DTP2R212 SA are commonly referred to as “receiver”,

“switcher”, “switching receiver”, or simply as DTP2R212.

About the DTP2R212

The Extron DTP2R212 is a two‑input switcher for 4K video signals with two simultaneous

outputs. The switching receiver features one HDMI and one DTP2 input, and one local

HDMI output. The device also features EDID Minder for managing EDID, and Key Minder for

managing HDCP outputs.

The DTP2R212 can also extract embedded HDMI two‑channel PCM audio to a stereo

captive screw output or an optional stereo amplifier output (DTP2 R 212 SA).

• The DTP2R212 receives the digital signal from Legacy DTP inputs up to 330feet

(100meters) with a maximum resolution of up to 4K @ 60 Hz, 4:2:0, with HDCP1.4,

supporting data rates up to 10.2Gbps.

• The DTP2R212 receives the digital signal from DTP2 inputs up to 330feet

(100meters) with a maximum resolution of up to 4K @ 60 Hz, 4:4:4, with HDCP2.3,

supporting data rates up to 18Gbps.

The switcher is housed in a one‑inch high, three‑quarter rack wide, rack‑mountable metal

enclosure, and is powered by an external power supply.

DTP2 R 212 Series • Introduction 2

Features

• Receives HDMI plus control and analog audio up to 330 feet (100 meters)

over a shielded CATx cable — The DTP2 R 212 models provide high reliability and

maximum performance on an economical and easily installed cable infrastructure.

• HDMI and DTP2 inputs

• HDMI input is ideal for connecting to a local source, such as a laptop or

ShareLink wireless collaboration gateway

• Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of

4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.

• Auto-switching between inputs — Auto‑switching allows for simple, unmanaged

installation. When multiple inputs are active, the switching priority is configurable.

• Supported HDMI 2.0b specification features include data rates up to 18 Gbps,

HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC

• Support for HDR – High Dynamic Range video — Enables greater contrast range

and wider color gamut by providing the necessary video bandwidth, color depth, and

metadata interchange capability for HDR video.

• HDCP 2.3 compliant — Ensures display of content‑protected 4K video media and

maintains interoperability with earlier versions of HDCP.

• Stereo audio de-embedding — Embedded HDMI two‑channel PCM audio can be

extracted to the stereo captive screw output or the optional stereo amplifier output.

• DTP2 R 212 SA model features energy efficient class D stereo amplifier

• 90 dB signal-to-noise ratio with 0.1% THD+N — Ensures quiet, low‑noise

amplification and maintains audio signal integrity for exceptional performance in a

compact, economical amplifier.

• Extron-patented CDRS™ - Class D Ripple Suppression — CDRS is an

Extron Patented technology that provides a smooth, clean audio waveform and an

improvement in signal fidelity over conventional Class D amplifier designs. CDRS

eliminates the high frequency switching ripple characteristic of Class D amplifiers,

a source of RF emissions which can interfere with sensitive AV equipment such as

wireless microphones.

• Automatic clip limiter — Detects actual onset of clipping by comparing input and

output waveforms. Gain is automatically reduced without audible artifacts to protect

speakers from clipping distortion.

• Selectable volume control — Allows the output volume to be remotely controlled

via SIS or using an optional Extron VCM 110 or VCM 200 analog volume and mute

controller or the VC 50 analog volume controller.

• 25.8 watts rms output power: 2 x 12.9 watts @ 4 ohms or 2 x 7.6 watts

@ 8 ohms — Used in combination with surface mount or ceiling speakers, the

integrated amplifier provides a compact, economical audio solution for classrooms,

meeting rooms and other applications, providing a significant step‑up in sound

quality over the speakers built into displays.

• CEC - Consumer Electronics Control Capability — Standard, built‑in CEC

commands can be triggered to control displays or other AV devices connected to

the HDMI output. The ability to control specific functions, such as power on/off, input

selection, or volume level, is dependent on implementation by the device manufacturer.

• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for

optimal performance

DTP2 R 212 Series • Introduction 3

• Compatible with CATx shielded twisted pair cable — The DTP2R212 models fully

support a maximum transmission distance of 330 feet (100 meters) for all compatible

resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair

cabling with solid center conductor sizes of 24 AWG or better is recommended for

optimal performance.

• Remote power capability with DTP2 products — For simplified installation, the

standard DTP2 R 212 without amplifier can be remotely powered by a DTP2 transmitter

over the twisted pair connection. It can also be configured to provide power to the

connected DTP2 transmitter.

• Accepts additional analog stereo audio signals — The DTP2R212 models accept

stereo analog audio from a DTP‑enabled product. This audio may be switched to the

stereo captive screw output or the optional stereo amplifier output, independent of the

video input selection.

• Stereo audio embedding — Pass‑through audio from the DTP input can be

embedded onto the HDMI output.

• Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional

RS‑232 control and IR signals can be transmitted alongside the video signal, allowing

remote AV devices to be controlled without the need for additional cabling.

• RS-232 insertion from the Ethernet control port — Saves system resources and

simplifies installation by enabling a control processor to access remote RS‑232 devices

over Ethernet.

• Display control RS-232 port — Serial commands inserted from Ethernet can be

routed to this port to control a connected display or other device.

• Supports multiple embedded audio formats — The DTP2R212 models are

compatible with a broad range of multi‑channel audio signals, providing reliable

operation with HDMI sources.

• Compatible with all DTP transmitters and DTP-enabled products — Enables

mixing and matching with desktop and wallplate transmitters, as well as other DTP‑

enabled products to meet application requirements.

• User-selectable HDCP authorization — Allows the unit to appear HDCP compliant

or non‑HDCP compliant to the connected source, which is beneficial if the source

automatically encrypts all content when connected to an HDCP‑compliant device.

Protected material is not passed in non‑HDCP mode.

• Comprehensive EDID management — Use PCS software to access EDID Minder for

setting video input EDID, capturing EDID from connected displays, or uploading custom

EDID files. Proper EDID management ensures that sources and displays are easily

integrated into a system resulting in optimized system operation. Freely downloadable

EDID Manager 2.0 software is available for advanced EDID editing and creating custom

EDID files.

• EDID Minder automatically manages EDID communication between connected

devices — EDID Minder ensures that the source powers up properly and reliably

outputs content for display.

• HDCP authentication and signal presence confirmation — Provides real‑time

verification of HDCP status for each digital video input and output. This allows for

simple, quick, and easy signal and HDCP verification through front panel LEDs, RS‑232,

USB, or Ethernet, providing valuable feedback to a system operator or helpdesk

support staff.

• HDCP Visual Confirmation — When HDCP‑encrypted content is transmitted to

a non‑HDCP compliant display, a full‑screen green signal is sent to the display for

immediate visual confirmation that protected content cannot be viewed on that display.

DTP2 R 212 Series • Introduction 4

• HDMI to DVI Interface Format Correction — Automatically enables or disables

embedded audio and InfoFrames, and sets the correct color space for proper

connection to HDMI and DVI displays.

• Automatic color bit depth management — Automatically adjusts color bit depth

based on the display EDID, preventing color compatibility conflicts between source and

displays.

• Output muting control — Provides the capability to mute the HDMI and/or analog

audio output at any time.

• Bass and treble controls

• Selectable stereo or dual mono audio — Allows the user to choose between

stereo output, or to sum the left and right channels into dual mono outputs using SIS

command.

• Ethernet monitoring and control — Enables control and proactive monitoring over a

LAN, WAN, or the Internet.

• Built-in Web pages — Enables the use of a standard browser for device monitoring

and troubleshooting over an intuitive Web interface.

• Front panel security lockout — This feature locks out all front panel functions; all

functions however, are available through USB or RS‑232 control.

• RS-232 control port — Enables the use of serial commands for integration into

a control system. Extron products use the SIS ‑ Simple Instruction Set command

protocol, a set of basic ASCII commands that allow for quick and easy programming.

• Front panel USB configuration port — Provides convenient access for information

and firmware updates.

• LED indicators for signal presence, power, and link status — Provide visual

indication of system status for real‑time feedback and monitoring of key performance

parameters.

• RJ-45 signal and link LED indicators for DTP port — Provide a means for validating

signal flow and operation, allowing quick identification of connectivity issues.

• Easy setup and commissioning with Extron PCS - Product Configuration

Software — Conveniently configure multiple products using a single software

application.

• 1” (2.5 cm) high, three-quarter rack width metal enclosure — With a low profile

enclosure, the device can be installed discreetly wherever needed.

• Includes LockIt HDMI cable lacing brackets

• External Extron Everlast power supply included — Provides worldwide power

compatibility with high‑demonstrated reliability and low power consumption.

• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty

DTP2 R 212 Series • Introduction 5

Application Diagrams

The following diagrams show typical applications for the DTP2R212 series.

CLASS 2

WIRING

4/8 OHM

1

2

L

R

Rx GTx

HDMI HDMI

RS-232IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

3.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

CVG

10V50mA

LR

VOL

REMOTE

R

DTP2 R 212 SA

LAN

OFF

SEND POWER

SIG LINK

DTP2 IN

POWER

12V

--A MAX

AUDIO

INPUTS

SIG LINK

DTP2 OUT

OVER DTP2

RS-232

IR

Tx Rx Tx RxG

INPUT

OFF

SEND

POWER

STATUS

OUTPUT

LINK

DTP2 T 211

CONFIG

POWER

12V

1A MAX

G

Tx Rx RTSCTS

COM 1

G

Tx Rx

COM 2

VCG

VOL

RELAYS

12C

1 2 3 4G

DIGITAL I/O

PWR OUT =6W

eBUS

+V +S

-S

G

LAN

IPCP PRO250

IR/S

SG

Extron

LAN

Extron

DTP2 R 212 SA

Receiver

Extron

SM 3

Surface Mount

Speakers

4K HDR Display

RS-232

HDMI

RS-232

HDMI

CATx Cable

up to 330' (100 m)

PC with

4K HDR

Video Output

Extron

DTP2 T 211

Transmitter

Extron

IPCP Pro 250

IP Link Pro

Control Processor

Audio

4K Media Player

TLP Pro 725M

7" Wall Mount

Touchlink Pro

Touchpanel

Figure 1. Typical Switching Receiver Application

1

DTP2 R 212 Series • Introduction 6

DTP2 R 212 SERIES

CONFIG

AUTO

SWITCH

INPUTS

OUTPUT

12

SIGNAL

HDCP

INPUTS

1

MODE NORM/ AUTO

2

CLASS 2

WIRING

4/8 OHM

1

2

L

R

Rx GTx

HDMI HDMI

RS-232 IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

3.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

CVG

10V 50mA

LR

VOL

REMOTE

R

DTP2 R 212 SA

LAN

OFF

SEND POWER

SIGLINK

DTP2 IN

POWER

12V

23

--A MAX

Rx

G

Tx RxTxG

IR

RxTx

1

RGB

HDMI DP

HDBT

DTP

AUDIO

CONTACT IN

RS-232

TALLY OUT

123G123+V

INPUTS

OVER DTP

REMOTE

RS-232

SIG

OUT

LINK

LAN

MODEL 80

FLAT PANEL

Extron Extron

ShareLink Pro 1000

HD WIN

STANDBY

SCREEN

DECODER

HD PASS

HDMI DECODER

SIGNAL

HDCP

CONFIG

OUTPUTINPUT

HDMI

WINDOW

HDMI

PASS-THROUGH

12

USB

LAN

Extron

Cable Cubby

Extron

DTP2 R 212 SA

Receiver

Extron

SM 3

Surface Mount

Speakers

Audio

Flat Panel Display

RS-232

HDMI

Audio

VGA

HDMI

DisplayPort

Laptop

Extron

Cable Cubby 700

Series/2 Cable

Access Enclosure

Wireless

Laptop

Tablet

Smartphone

Extron

DTP T DSW

4K 233

Transmitter

Extron

ShareLink Pro 1000

Collaboration Gateway

Ethernet

Facility/Room

Wireless Access Point

Laptop Laptop

AudioVGAHDMIDisplayPort

CATx Cable

up to 230'

(70 m)

Figure 2. Typical Switching Receiver Application

2

DTP2 R 212 Series • Installation 7

Installation

This section describes the installation and setup of the DTP2R212 switcher. Topics include:

• Installation Overview

• Rear Panel Features

• Wiring Connections

• LockIt Lacing Brackets

Installation Overview

To install and set up the DTP2R212 switching receiver:

1. Turn off all equipment and disconnect it from the power source.

2. Mount the switcher (optional) on a rack shelf or furniture (see Mounting the

DTP2R212 on page61).

3. Connect an HDMI input source to the DTP2R212 input. The default (Extron) EDID is

present and Hot Plug Detect (HPD) is actively controlled on the input.

NOTE: LockIt cable lacing brackets are provided to secure the HDMI cables to the

rear panel ports to reduce stress on the HDMI connectors and prevent signal loss

due to loose cable connections (see the LockIt Lacing Brackets on page18).

4. Connect an HDMI output device to the HDMI output. By default, the EDID of this

device is stored at the HDMI inputs.

5. Connect an RJ-45 DTP2 transmitting device to the DTP2 In connector (see

figure3,

D

, on page8), set the Send Power switch (

E

).

ATTENTION:

• Position this switch (see figure3,

E

) BEFORE connecting the appropriate

device to the TP connector. Failure to comply can damage the endpoint.

• Positionnez le sélecteur (voir figure3,

E

) AVANT de connecter l’appareil

approprié au connecteur TP. Ne pas respecter cette procédure pourrait

endommager le point de connexion.

• If the transmitting device is in the Extron DTP2 series and you are setting up the

DTP2R212 receiver to supply power to the transmitter:

• Set the receiver SEND POWER switch (

E

) to the “UP” (SEND POWER)

position (see figure4 on page10).

• Set the transmitter SEND POWER switch (

E

) to the “DOWN” (OFF) position.

• If the transmitting device is in the Extron DTP2 series and you setting up the

DTP2R212 (non‑amplifier model) to receive power from the transmitter:

• Set the receiver SEND POWER switch of the receiver (

E

) to the “DOWN”

(OFF) position (see figure4 on page10).

• Set the transmitter SEND POWER switch to the “UP” (SEND POWER)

position.

DTP2 R 212 Series • Installation 8

• If the transmitting device is in the Extron DTP2 series and you setting up the

DTP2R212 SA (amplifier model), you can only set the receiver to send power to

the transmitter:

• Set the receiver SEND POWER switch of the receiver (

E

) to the “UP” (SEND

POWER) position (see figure5 on page11).

• Set the transmitter SEND POWER switch of the transmitter to the “DOWN”

(OFF) position.

• If the transmitting device is in the Extron Legacy DTP series and not the DTP2

series, set the SEND POWER switches of both devices to the “DOWN” (OFF)

position (see figure4 on page10).

6. Connect Over DTP RS-232 and IR control. Connect a serial RS‑232 signal, a

modulated IR signal, or both into this 3.5mm, 5‑pole captive screw port (

C

) for

bidirectional RS‑232 and IR communication (see Over DTP2 RS-232 and IR Control

on page17 for connection procedures).

7. Connect control devices. Connect your computer to either of the following ports to

configure and control the switcher via SIS commands or PCS:

• RS-232 port — This 3‑pole RS‑232 port (

L

) for serial RS‑232 control (see

Display and Remote RS-232 Control on page16 for connection procedures).

• Config port — USB mini‑B port for USB control (see Connecting to the USB

Port on page21 for connection procedures).

• LAN (Ethernet) port — Connect an Ethernet cable for LAN control. LEDs on

the connector indicate link and activity status (see LAN Connector Wiring on

page14 for connection wiring).

8. Power on the output display.

9. Connect power to the switcher (see Powering on the Receiver on page20).

10. (Optional) Configure EDID Minder (see the DTP2R212 PCS Help File).

11. Power on the source devices.

Rear Panel Features

1

2

Rx GTx

HDMI HDMI

RS-232

DTP2 R 212

IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

2.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

LAN

REMOTE

LR

OFF

SEND

POWER

R

SIGLINK

DTP2 IN

CLASS 2

WIRING

4/8 OHM

1

2

L

R

Rx GTx

HDMI HDMI

RS-232 IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

3.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

CVG

10V 50mA

LR

VOL

REMOTE

R

DTP2 R 212 SA

LAN

OFF

SEND POWER

SIGLINK

DTP2 IN

B DCA I J LKGF H M NE

**



*

A

Power inlet

H

Amplified audio output (SA models)

B

HDMI input

I

Display control

C

OVER DTP2 control

J

Remote amplified volume control

(SA models)

D

DTP2 IN RJ-45 port

K

Switch for volume control

(SA models)

E

Send Power toggle switch

L

Remote RS-232 port

F

HDMI output

M

LAN (Ethernet) port

G

Audio output

N

Reset button

Figure 3. Rear Panel Features

3

DTP2 R 212 Series • Installation 9

A

Power inlet — Plug the provided external 12VDC power supply into this 2‑pole,

3.5mm captive screw inlet and into an DC power outlet (see Power Connector on

page12).

NOTE: The DTP2 R 212 SA model is supplied with, and requires, a higher‑wattage

power supply (4.2 A, 50 Watts). The non‑SA model can use a standard 2.0 A,

24Watt supply.

B

HDMI input — Connect a HDMI video source to this female type A HDMI connector.

This port can also accept DVI video with appropriate adapter.

NOTE: LockIt cable lacing brackets are provided to secure the HDMI cables to the

rear panel ports and reduce stress on the connectors, preventing signal loss due

to loose cable connections (see LockIt Lacing Brackets on page18).

C

OVER DTP2 control — Connect a serial RS‑232 signal, a modulated IR signal,

or both into this 3.5mm, 5‑pole captive screw port for bidirectional RS‑232 and IR

communication (see Over DTP2 RS-232 and IR Control on page17 to wire the

connector).

D

DTP2 IN RJ-45 port — Plug one end of a DTP2 cable to this RJ‑45 female port.

Plug the opposite end of this cable into the DTP port on a compatible transmitter (see

TP Connector and Cable Recommendations on page14 to wire the RJ‑45

connector and NOTES on page15).

• Signal LED — Lights green when the unit is sensing a TMDS clock signal on the

DTP2 input.

• Link LED — Lights amber to indicate a valid link is established between the units.

ATTENTION:

• Do not connect this device to a telecommunications or computer data network.

• Ne connectez pas cet appareil à un réseau de télécommunications ou de

données informatiques.

E

Send Power toggle switch (see figure3 on page8) — The Send Power switch

enables or disables the sending of power from the receiver to a DTP2 transmitter.

Set the toggle switch to the UP (Send Power) position on the powered DTP2 unit to

enable sending remote power to the other device. Set the toggle switch to the DOWN

(OFF) position on the DTP2 unit receiving power.

NOTES: Guidelines for setting the Send Power switch:

• If you are using the DTP2 R 212 SA (amplified audio) receiver, the power output

of the DTP2 transmitter is not enough to power the receiver. You can send

power from the receiver to the transmitter, but not from the transmitter to the

receiver (see figure5 on page11).

• If you are using the DTP2 R 212 receiver (not the SA model), the power output

of the DTP2 transmitter is enough to power the receiver. You can send power

either way, if desired (see figure4 on page10).

DTP2 R 212 Series • Installation 10

ATTENTION:

• The DTP2R212 device is conﬁgured to send or receive power with other

DTP2 models only. If connected to a Legacy DTP device, set the SEND

POWER toggle switch to the “DOWN” position (OFF). Failure to turn the power

OFF will damage the connected DTP device (see ﬁgure4).

• Le DTP2R212 est conﬁguré pour fournir une alimentation aux modèles

DTP2 uniquement. S’il est connecté à un autre appareil, veuillez positionner

l’interrupteur à bascule sur « DOWN » (OFF). Si l’interrupteur n’est pas

positionné sur OFF, vous risquez d’entraîner la défaillance de l’appareil Legacy

DTP connecté (voir ﬁgure4).

1

2

Rx GTx

HDMI HDMI

RS-232

DTP2 R 212

IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

2.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

LAN

REMOTE

LR

OFF

SEND

POWER

R

SIG LINK

DTP2 IN

SEND

POWER

OFF

DTP2 T 211

CONFIG

INPUT

LINK

OUTPUT

SEND

POWER

OFF

STATUS

DTP HDMI 330 Tx

1

2

Rx GTx

HDMI HDMI

RS-232

DTP2 R 212

IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

2.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

LAN

REMOTE

LR

OFF

SEND

POWER

R

SIG LINK

DTP2 IN

SEND

POWER

OFF

SEND

POWER

OFF

ON

DTP2 T 211

CONFIG

INPUT

LINK

OUTPUT

SEND

POWER

OFF

STATUS

1

2

Rx GTx

HDMI HDMI

RS-232

DTP2 R 212

IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

2.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

LAN

REMOTE

LR

OFF

SEND

POWER

R

SIG LINK

DTP2 IN

SEND

POWER

OFF

ON

SEND

POWER

OFF

DTP2 T 211

CONFIG

INPUT

LINK

OUTPUT

SEND

POWER

OFF

STATUS

CATx Cable

up to 330' (100 m)

No Remote Power

Local

Power Supply

Extron

DTP2 R 212

Receiver

Extron

DTP HDMI 4K 330 Tx

Transmitter

CATx Cable

up to 330' (100 m)

Direction of

Remote Power

CATx Cable

up to 330' (100 m)

Direction of

Remote Power

Extron

DTP2 R 212

Receiver

Extron

DTP2 T 211

Transmitter

Extron

PS 1220

(2 A, 24 Watts)

Local

Power Supply

Extron

DTP2 R 212

Receiver

Extron

DTP2 T 211

Transmitter

Extron

PS 1220

(2 A, 24 Watts)

Figure 4. DTP2 R 212 (non-SA) Send Power Toggle Switch Configuration

4

DTP2 R 212 Series • Installation 11

CLASS 2

WIRING

4/8 OHM

1

2

L

R

Rx GTx

HDMI HDMI

RS-232 IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

3.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

CVG

10V 50mA

LR

VOL

REMOTE

R

DTP2 R 212 SA

LAN

OFF

SEND POWER

SIG LINK

DTP2 IN

SEND

POWER

OFF

DTP2 T 211

CONFIG

INPUT

LINK

OUTPUT

SEND

POWER

OFF

STATUS

DTP HDMI 330 Tx

CLASS 2

WIRING

4/8 OHM

1

2

L

R

Rx GTx

HDMI HDMI

RS-232 IR

RxTx

OVER DTP2

Rx GTx

RS-232

DISPLAY

POWER

12V

3.0 A MAX

RS-232

RxTx G

INPUTS

OUTPUT

CVG

10V50mA

LR

VOL

REMOTE

R

DTP2 R 212 SA

LAN

OFF

SEND POWER

SIG LINK

DTP2 IN

SEND

POWER

OFF

ON

SEND

POWER

OFF

DTP2 T 211

CONFIG

INPUT

LINK

OUTPUT

SEND

POWER

OFF

STATUS

CATx Cable

up to 330' (100 m)

No Remote Power

Extron

PS 1242

(4.2 A, 50 Watts)

Local

Power Supply

Extron

DTP2 R 212 SA

Receiver

Extron

DTP HDMI 4K 330 Tx

Transmitter

DTP2 Endpoint Connected to a DTP2 Endpoint

CATx Cable

up to 330' (100 m)

Direction of

Remote Power

Extron

DTP2 R 212 SA

Receiver

Extron

DTP2 T 211

Transmitter

Extron

PS 1242

(4.2 A, 50 Watts)

Figure 5. DTP2 R 212 SA Send Power Toggle Switch Configuration

F

HDMI output — Connect an HDMI display device to this female Type A HDMI port. The

EDID information is read from the connected output device via this port and is written

to memory on each input whenever the output device is connected to this port and

powered on.

NOTE: The EDID information is also read and stored whenever power is recycled to

the connected output device or when the output device is replaced.

G

Audio output — Connect a 5‑pole captive screw connector for balanced or

unbalanced analog audio output. This audio output is not amplified and can be

connected to an external amplifier.

H

Amplified audio output (SA models only) — Connect a 4‑pole captive screw

connector for amplified audio output to external speakers.

I

Display control — Use 3‑pole captive screw connector for bi‑directional RS‑232

control of a connected display device.

J

Remote amplified volume control port (SA models only) — Connect an external

audio controller to control volume and mute levels remotely via this 3.5mm, 3‑pole

captive screw port (see Remote Control (SA models only) on page16 for more

information and to wire the connection).

K

Switch for volume control (SA models only) — When using the amplified output

connector (

H

), flip the switch to the lower position for remote volume control of the

amplified output through port

J

.

L

Remote RS-232 port — Connect a serial RS‑232 device via this 3.5mm, 3‑pole

captive screw port for remote control of the DTP2 R 212 (see Display and Remote

RS-232 Control on page16 to wire the connector).

5

DTP2 R 212 Series • Installation 12

M

LAN (Ethernet) port — Use an RJ‑45 cable to connect this jack to a LAN (Ethernet)

for control of the device.

N

Reset button — With a tweeker or other pointed tool, press and hold the recessed

reset button:

• Press and hold for 3 seconds to reset back to factory default. IP settings are

retained.

• Press and hold for 10 seconds to reset back to factory default. IP settings are reset

to default.

• Press and hold while powering the unit on enables the unit to revert to factory

default firmware version and factory default setting.

NOTE: The receiver can also be reset to factory settings using SIS commands (see

Reset on page52) or PCS (see PCS Device Menu on page27).

Wiring Connections

Power Connector

A 12VDC power supply is provided with the DTP2R212. Follow these instructions to wire

the 2‑pole captive screw connector to your power supply:

CAUTION: The DC output cables must be kept separate from each other while the

power supply is plugged in. Remove power before wiring.

ATTENTION : Les câbles de sortie CC doivent être séparés les uns des autres tant que

la source d’alimentation est branchée. Coupez l’alimentation avant d’effectuer tout

raccordement.

ATTENTION:

• Do not connect power to the DTP2 R 212 until you have read the ATTENTION

notiﬁcations on the next page.

• Ne branchez pas l’alimentation au DTP2 R 212 avant d’avoir lu les mises en garde

« ATTENTION » en page suivante.

1. Cut the DC output cord to the length needed.

2. Strip the jacket to expose 3/16inch (5mm) of the conductors (see figure6).

3. Slide the leads into the supplied 2‑pole captive screw connector and secure them,

using a small screwdriver.

SECTION A–A

Ridges

Smooth

A

3/16"

(5 mm) Max.

POWER

12V

--A MAX

Figure 6. Wiring the Power Connector

4. To verify the power cord polarity before connecting the plug, connect the power supply

with no load and check the output with a voltmeter.

5. Use the supplied tie wrap to strap the power cord to the extended tail of the connector.

6

Page is loading ...

Extron DTP2 R 212 Series User manual

This manual is also suitable for

Extron DTP2 R 212 Series User manual

Related papers

Other documents