Altronix Trove3MBK3 is a versatile enclosure and backplane system designed to accommodate Altronix power supply/chargers, sub-assemblies, and Mercury controllers. It provides ample space and easy access for installation and maintenance, making it suitable for various applications such as access control, security, and power distribution.
Altronix Trove3MBK3 is a versatile enclosure and backplane system designed to accommodate Altronix power supply/chargers, sub-assemblies, and Mercury controllers. It provides ample space and easy access for installation and maintenance, making it suitable for various applications such as access control, security, and power distribution.
Trove3MBK3
Trove3 enclosure with TM3B backplane and
36 BR3M mounting brackets
Access & Power Integration
Rev. T3MBK3042121
Installing Company: _________________________ Service Rep. Name: __________________________________________
Address: _________________________________________________________ Phone #: _________________________
All registered trademarks are property of their respective owners. More than just power.™
Installation Guide
All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the included corresponding Sub-Assembly Installation Guides for further information.
- 2 - Trove3MBK3 Installation Guide
Overview:
Altronix Trove3MBK3 enclosure/backplane and brackets accommodate Altronix power supply/charger(s), sub-assemblies and Mercury controllers.
Hardware and Accessories:
• Two (2) tamper switches (Altronix Model TS112 or equivalent).
• Cam lock.
Mechanical:
• 16 Gauge enclosure with ample knockouts for convenient access.
• Enclosure Dimensions (H x W x D): 36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm).
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.
Product is intended for indoor use only.
1. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners and screws
in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper screws, level and secure.
Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install
the three fasteners. Place the enclosure’s upper keyholes over the three upper screws.
Install the three lower screws and make sure to tighten all screws.
2. Mount included UL Listed tamper switches (Altronix Model TS112 or equivalent) in desired location,
opposite hinge. Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from
the right side (Fig. 1, pg. 2). Connect tamper switch wiring to the Access Control Panel input or the
appropriate UL Listed reporting device. To activate alarm signal open the door of the enclosure.
3. Mount Altronix power supply/charger(s), sub-assemblies and Mercury controllers to brackets (BR3M),
refer to drawings below.
5. Secure BR3M brackets with boards to the backplane (TM3B) utilizing two (2) lock nuts (Fig. 5, pg. 3).
Fig. 2 - Pem location
PEM Location Mercury Platform Altronix
1LP4502, LP1502, MR16IN,
MR16OUT, MR52
ACM4(CB), ACM8(CB), ACMS8(CB), LINQ8ACM(CB),
LINQ8PD(CB), PD8UL(CB), PDS8(CB)
2LP4502, LP1502, MR16IN,
MR16OUT, MR52
eFlow4NB, eFlow6NB,
eFlow102NB, eFlow104NB
3ACM4(CB), ACM8(CB), ACMS8(CB), LINQ8ACM(CB),
LINQ8PD(CB), PD8UL(CB), PDS8(CB)
4 LP2500, MUX8
5ACM4(CB), LINQ8PD(CB),
PD8UL(CB), PDS8(CB)
6LP4502, LP1502, LP2500,
MR16IN, MR16OUT, MR52, MUX8
7eFlow4NB, eFlow6NB,
eFlow102NB, eFlow104NB
8LP4502, LP1502, LP2500,
MR16IN, MR16OUT, MR52, MUX8
ACM4(CB), LINQ8PD(CB),
PD8UL(CB), PDS8(CB)
Fig. 1
Tamper Switch
(included)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
2
1
3
4
8
5
6
7
Trove3MBK3 Installation Guide - 3 -
Trove3MBK3 Configuration of Altronix / LenelS2 / Mercury Platform Boards:
Altronix / Lenel / Mercury Access Controller Pem Mounting
eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB A
ACM4, ACM4CB, ACM8, ACM8CB, ACMS8, ACMS8CB, LINQ8ACM, LINQ8ACMCB, LINQ8PD, LINQ8PDCB, PD4UL,
PD4ULCB, PD8UL, PD8ULCB, PDS8, PDS8CB B
LNL-2220, LNL-4420, LNL-1320, LNL-1100, LNL-1200, LP1502, LP4502, MR52, MR16IN, MR16OUT C
A
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
A
A
C
B
C
Fig. 3
Backplane
BR3M
Bracket
Lock Nut
Fig. 4
- 4 - Trove3MBK3 Installation Guide
Trove3 Enclosure Dimensions (H x W x D approximate):
36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm)
G
G
2”
(50.8mm)
8.75” (222.3mm) 8.75” (222.3mm)
8.62” (219mm)
7.06” (179.3mm)
1.25” (31.8mm)
1.25” (31.8mm)
2.00” (50.8mm) 7.12” (222.3mm) 9.5” (241.3mm) 9.5” (241.3mm)
30.12” (768.1mm)
14.01” (355.9mm) 14.01” (355.9mm)
1.25” (31.8mm) 1.55” (39.4mm)
1.78” (45.2mm)
1.25” (31.8mm)
1.07”
(27.2mm)
1.10” (27.9mm)
2” (50.8mm)
10.75” (273.1mm)10.75” (273.1mm) 10.62” (269.8mm)
2.00” (50.8mm)10.75” (273.1mm)10.75” (273.1mm) 10.62” (269.8mm)
36.12” (917.5mm)
33.63” (854.2mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
web site: www.altronix.com | e-mail: [email protected]
IITrove3MBK3 I02U MEMBER
-
1
-
2
-
3
-
4
Altronix Trove3MBK3 is a versatile enclosure and backplane system designed to accommodate Altronix power supply/chargers, sub-assemblies, and Mercury controllers. It provides ample space and easy access for installation and maintenance, making it suitable for various applications such as access control, security, and power distribution.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Altronix Trove Series Installation guide
-
Altronix Trove2SS2 Installation guide
-
Altronix T3MK77F16D Installation guide
-
Altronix TROVE T2MK7F8PQ Installation guide
-
Altronix PD4ULCB User manual
-
Altronix TROVE Mercury Series T3MK75F16 Installation guide
-
-
Altronix TROVE Trove1M1WP Installation guide
-
-