Altronix PD4ULCB User manual

Type
User manual

Altronix PD4ULCB is a power distribution module designed to convert a single AC or DC input into four PTC protected Class 2 Rated power-limited auto-resettable outputs. It features four individually PTC protected outputs with a maximum current of 2A per output, a power-on green LED indicator, and is suitable for indoor use. The PD4ULCB is ideal for use with Altronix UL Listed power supplies and is backed by a lifetime warranty.

Altronix PD4ULCB is a power distribution module designed to convert a single AC or DC input into four PTC protected Class 2 Rated power-limited auto-resettable outputs. It features four individually PTC protected outputs with a maximum current of 2A per output, a power-on green LED indicator, and is suitable for indoor use. The PD4ULCB is ideal for use with Altronix UL Listed power supplies and is backed by a lifetime warranty.

1P 1N 2P 2N
LED
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
F1
3P 3N 4P 4N
F2 F3 F4
NP
PD4ULCB
POWER DISTRIBUTION
UNIT
DC
Positive (+)
Input
DC
Negative (–)
Input
NOTE: DC outputs are power-limited.
CAUTION: Do not expose to rain
or moisture.
Fig. 1
Overview:
PD4ULCB is a UL Listed Sub-Assembly power distribution module designed to convert a single AC or DC input
into four (4) PTC protected Class 2 Rated power-limited auto-resettable outputs.
Specifications:
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all
local codes and authorities having jurisdiction. Product is intended for indoor use only and should be installed by
qualified personnel.
1. Refer to Sub-Assembly Installation Instruction for mounting Rev. MS020119.
2. Mount PD4ULCB in the desired location/enclosure (mounting hardware included).
3. Connect the desired power supply output to the terminals marked [INPUT] (Fig. 1).
Note: Left terminal is NEG. (–) and right terminal is POS. (+) (Fig. 1).
4. Measure output voltage before connecting devices. This helps avoiding potential damage.
5. Connect devices to be powered to the terminal pairs 1 to 4, marked [1P - 1N] through [4P - 4N].
All terminals with common suffix P “1P, 2P...” are the same polarity.
Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies as indicated
in the installation manuals for the power supply.
Agency Listings:
UL Listed Sub-Assembly for
UL 294* Access Control System Units.
*Access Control Performance Levels:
Destructive Attack - N/A (sub-assembly);
Endurance - IV; Line Security - I;
Stand-by Power - I.
UL 603 Power Supplies for Use with
Burglar Alarm Systems.
UL 1481 Power Supplies for Fire
Protective Signaling Systems.
cUL Listed:
General Signaling Equipment Evaluated
to CSA Standard C22.2 No.205-M1983.
Power Supplies for Burglar Alarm Systems
ULC-S318-96.
Input:
12VDC or 24VDC, up to 10A.
24VAC or 28VAC, up to 12A.
Outputs:
Four (4) individually PTC protected outputs @ 2A
per output max. current (total output current
should not exceed max. current rating of power
supply employed).
PTC Ratings:
PTCs are rated @ 2A/250V.
Visual Indicators:
Power On green LED indicator.
Board Dimensions (W x L x H approximate):
3.25” x 5.25” x 1” (82.6mm x 133.4mm x 25.4mm).
PD4ULCB
UL Listed Sub-Assembly Power Distribution Module
(#P) Positive DC outputs
(#N) Negative DC outputs
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IIPD4ULCB - Rev. 020119 D12U MEMBER
  • Page 1 1

Altronix PD4ULCB User manual

Type
User manual

Altronix PD4ULCB is a power distribution module designed to convert a single AC or DC input into four PTC protected Class 2 Rated power-limited auto-resettable outputs. It features four individually PTC protected outputs with a maximum current of 2A per output, a power-on green LED indicator, and is suitable for indoor use. The PD4ULCB is ideal for use with Altronix UL Listed power supplies and is backed by a lifetime warranty.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI