JasonL PVM1001BK Operating instructions

Brand
JasonL
Model
PVM1001BK
Type
Operating instructions

This manual is also suitable for

1
1
1
1 1 5
1 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
2 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
STEP 1
Insert castors
into base.
STEP 2
Insert gas cylinder
into base.
STEP 3
Insert drafting ring
over gas as shown.
Base assembly complete !
Drafting Base Assembly
Base with
gas inserted.
STEP 2
3 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
4 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
Height adjustable arms Assembly
STEP 1
Adjustable arm and armpad comes
assembled
STEP 3
Attach arm using 6 x M6*35mm (3
on the left armand 3 on the right
arm). Tighten screws all the way
down into the chair seat.
Tip chair seat upside down. Rest seat
on corner of a table. Attach arm to
chair seat using B spacer on the one
hole each left and right arm.
STEP 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

JasonL PVM1001BK Operating instructions

Brand
JasonL
Model
PVM1001BK
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers