2. JasonL
  3. PVM100BK

JasonL PVM100BK Operating instructions

  • Hello! I've reviewed the user manual for the Plover Office Chair. This document provides guidance on assembling the chair, including both standard and drafting base options, and how to attach the height-adjustable arms. I am ready to assist you with any questions you have about the assembly or features described in this manual.
  • What is the first step for standard base assembly?
    What is the first step for drafting base assembly?
    How many screws are used to attach the arms to the chair seat?
1
1
1
1 1 5
1 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Oce Chair
Insert castors
into base.
Insert gas
cylinder into
base.
Standard Base Assembly Drafting Base Assembly
Insert drafting
ring over gas
as shown.
Insert castors
into base.
Insert gas
cylinder into
base.
STEP 1 STEP 1
2 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Oce Chair
STEP 2
3 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Oce Chair
4 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Oce Chair
Height adjustable arms Assembly
STEP 1
Adjustable arm and armpad comes
assembled
STEP 3
Attach arm using 6 x M6*35mm (3
on the left armand 3 on the right
arm). Tighten screws all the way
down into the chair seat.
Tip chair seat upside down. Rest seat
on corner of a table. Attach arm to
chair seat using B spacer on the one
hole each left and right arm.
STEP 2
/