2. Office
  3. Office furniture
  4. Office & computer chairs
  5. JasonL
  6. HRFB01BK

JasonL HRFB01BK Operating instructions

  • Hello, I have analyzed the user manual for the Heron Fabric Ergonomic Chair. This document provides detailed instructions on how to assemble your new chair, covering the base, back, and adjustable arms. I'm ready to assist you with any questions you may have about the assembly process, the function of the adjustment levers or other features of the device.
  • How do I adjust the height of the backrest?
    How do I adjust seat height and back angle?
    What does the elastic band around the stem of the chair back do?
1 of 4
www.jasonl.com.au
Heron Fabric
Ergonomic Chair
Need help! Call us on 1300 527 665
2 of 4
www.jasonl.com.au
Heron Fabric
Ergonomic Chair
Standard Base Assembly
Need help! Call us on 1300 527 665
STEP 1
Insert castors
into base.
STEP 2
Insert gas cylinder
into base.
STEP 3
Place the
telescopic cover
over gas cylinder
Base assembly complete !
Base with
gas inserted.
Heron Fabric
Ergonomic Chair
Leave elastic inplace. This keeps the
two sections of the back bellow in
place.
STEP 4
Identify the stem of the chair back inside the square back bellow
STEP 5
Insert the stem firmly into
mechanism at the back bottoms out.
Therachet height adjustor works like
a car head rest. Press all the way
down then lift to required position.
When back is in place, remove
elastic band.
STEP 6
Assembly Done
The levelers adjust seat height and
back angle.
3 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Back Assembly
Height adjustable arms Assembly
4 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Heron Fabric
Ergonomic Chair
STEP 1
Adjustable arm and armpad comes
assembled
STEP 3
Attach arm using 6 x M6*35mm (3
on the left armand 3 on the right
arm). Tighten screws all the way
down into the chair seat.
Tip chair seat upside down. Rest seat
on corner of a table. Attach arm to
chair seat using B spacer on the one
hole each left and right arm.
STEP 2
/