JasonL Rosella Ergonomic Office Chair Operating instructions

Brand
JasonL
Model
Rosella Ergonomic Office Chair
Type
Operating instructions
Need help!
Call us on
1300 527 665
www.jasonl.com.au
NOTES AND WARNINGS:
Please check all componets before assembing the chair.
PARTS
A
5pcs
C
1pc
B
1pc
E
1pc
F
1pc
D
1pc
G
1pc
H
2pcs
I J
2pcs 3pcs
M8*17MM1/4*1"
1/4*38MM
Rosella Chair
No Arms
Need help!
Call us on
1300 527 665
www.jasonl.com.au
INSTRUCTIONS:
STEP 1:
1
C
J:1/4*1"(2PCS)
2
B
A
E
D
I:1/4*38MM(2PCS) G
STEP 2:
1
C
J:1/4*1"(2PCS)
2
B
A
E
D
I:1/4*38MM(2PCS)
G
Rosella Chair
No Arms
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 3:
STEP 4:
L:M8*17MM(3PCS)
3
4F
L:M8*17MM(3PCS)
3
4
F
Rosella Chair
No Arms
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 5:
STEP 6:
5
6
Both hands pull the waist up
and down slide, adjustable
waist travel 80mm .
Hold the lower end of
backrest with both
hands, pull up or down,
that is to achieve
backrest lift function, lift
trip 60mm .
5
6
Both hands pull the waist up
and down slide, adjustable
waist travel 80mm .
Hold the lower end of
backrest with both
hands, pull up or down,
that is to achieve
backrest lift function, lift
trip 60mm .
Hold the lower end of backrest with both
hands, pull up or down, that is to achieve
backrest lift function, lift trip 60mm.
Both hands pull the waist up and down slide,
adjustable waist travel 80mm.
Rosella Chair
No Arms
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 7:
STEP 8:
Adjusting the tilt
tension.
Adjusting the seat
height
Always rotate
clockwise for
locking and
unlocking.
7
Always rotate
clockwise for
locking and
unlocking.
Adjusting the
tilt tension.
8
7
Rosella Chair
No Arms
Need help!
Call us on
1300 527 665
www.jasonl.com.au
NOTES AND WARNINGS:
• Do not sit on any part other than the seatthis product only for one person sit at a time
• Do not stand on the chair or sit on the edge of the seat
• Do not use the product as a step stool or carrier
•Do not insert fingers or hand into movable parts or crevices
• Disassembling or repairing the product by yourself is dangerous. If anyquestions on the
chair,be sure to contact our distributors for any necessary disassembly/repair
• Do not modify the product. Our company will not be responsible for any malfunctions
and injuries caused by customers' self renovation
• For the safety, please check all the bolts and screws at least every 6 months.
•Do not use the chair unless all of bolts and screws are fixed
• Please use the chair indoor or in the similar environments, it may cause deformed or
mould if the chair is placed outdoor or the place with water
•Avoid keeping the product in extremely hot, very humid or dry places, as this can lead to
deformation, discoloration, and mould formation
• Avoid keeping the product in direct sunlight, as this may cause deformation or
discoloration. If you assemble up the product nearby a window, ensure that direct
sunlight is always blocked by a curtain, blind, etc
•Avoid places where the product is directly exposed to heat from heaters, air
conditioners, etc., as this can cause deformation and discoloration
• When the interior of the room becomes hot and humid (over 28°C, relative humidity
over 50%), ensure that a window is open
• Please do not tear armrest pad cover up
• When moving the chair, please use 2 hands to push the chair or have 2 people to carry
the seat pan to move the chair, pls do not pull or drag the head rest for the movement
• If any part is broken or loststop using the product until repairs are made and please
contact our sales department accordingly
Rosella Chair
No Arms
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

JasonL Rosella Ergonomic Office Chair Operating instructions

Brand
JasonL
Model
Rosella Ergonomic Office Chair
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents