2. JasonL
  3. PVM1001BK

JasonL PVM1001BK, PVM1001PU Operating instructions

  • I've reviewed the user manual for the Plover Drafting Chair and I'm ready to help you with any questions you have. This document provides step-by-step instructions for assembling the chair, including the base, gas cylinder, drafting ring, and adjustable arms
  • What is the first step in assembling the drafting base?
    What should you do after inserting the gas cylinder into the base?
    How are the arms attached to the chair seat?
1
1
1
1 1 5
1 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
2 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
STEP 1
Insert castors
into base.
STEP 2
Insert gas cylinder
into base.
STEP 3
Insert drafting ring
over gas as shown.
Base assembly complete !
Drafting Base Assembly
Base with
gas inserted.
STEP 2
3 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
4 of 4
www.jasonl.com.au
Need help! Call us on 1300 527 665
Plover
Drafting Chair
Height adjustable arms Assembly
STEP 1
Adjustable arm and armpad comes
assembled
STEP 3
Attach arm using 6 x M6*35mm (3
on the left armand 3 on the right
arm). Tighten screws all the way
down into the chair seat.
Tip chair seat upside down. Rest seat
on corner of a table. Attach arm to
chair seat using B spacer on the one
hole each left and right arm.
STEP 2
/