Premier SCR-4606TVD User manual

DEAR CUSTOMER

In order to achieve the best performance of your product, please read this

instruction manual carefully before using, and keep it for future reference.

If you need extra support, please write to info@premiermundo.com

-

+

INSTRUCTION MANUAL

SCR-4606TVD

Car Audio/Video System

P-1

PREMIER CUSTOMER SERVICE

NOTE

This unit may be submitted to changes in specifications, characteristics and/or operation without prior

notice to the user, in order to continue improving and developing its technology.

Venezuela:

0800 ELECTRIC (353-2874)

Panama: 300-5185

Website

www.premiermundo.com

E-mail:

servicioalcliente@ premiermundo.com

P-2

Avoid Moisture :

To reduce the risk of fire or electric shock, do not expose this equipment to rain or

moisture .

Use Recommended Accessories :

to reduce the risk of fire or electric shock, and annoying

interference, use only the recommended accessories.

POWER SUPPLY :

the appliance should be connected to power supply only of the type described

in the operating instruction or as marked on the appliance .

Protect the disc mechanism :

Avoid inserting any foreign objects into the slot of this player. Failure to observe

this may cause malfunction due to the precise mechanism of this unit .

Important safety

P-3

Content.............................................

Disc Note..........................................

Installation ........................................

Detaching control panel......................

Attaching control panel.......................

Electric Connection ...........................

Remote Control ...............................

Basic Operation................................

Loading/Ejecting a DISC .................

Open/Close Monitor and Angle

Adjustment......................... ........

TFT Monitor Adjustment ..................

Setting animation...........................

Setting wallpaper............................

Setting LED Light...........................

Audio Quality Adjustment..................

Setting Time.....................................

Setting Audio Mode ..........................

Reset Factory Settings.......................

Rear View Camera.............................

Control Panel ...................................

Unit keys..........................................

Radio Operation...............................

Listening to radio...............................

Storing stations in memory ................

Automatic Memory Storing &

Program Scanning........................

Media Operation...............................

23

25

26

27

29

30

31

32

33

35

36

37

38

39

40

3

4

5

7

8

9

10

13

14

15

16

17

20

21

22

Basic Operation................................

Selecting Play Mode.........................

On-Screen Display Function..............

Digital Video Special Function............

Multi-subtitle language function.........

Multi-audio language function............

Multi-angle function...........................

Title menu function ............................

Media Setup Menu............................

System Setup....................................

Language Setup................................

Video Setup ......................................

Digital Setup .....................................

AUX Operation..................................

BT Operation.....................................

TV Operation.....................................

USB Operation..................................

SD/MMC Card Operation....................

MP3/WMA/JPEG/MPEG4 Play.............

Specification.....................................

Troubleshooting ................................

Content

P-4

Disc Note

Supported Formats

The following 12 cm discs are supported:

Digital Video (single-side discs

single-double discs)

Video CD

CD Audio

MP3

MPEG4

Discs Which Can Not Be Played

Digital Video-RAM

CDV

CDG

Do not warp discs.

Dirt, dust, scratches and warping disc

will cause malfunction .

Do not place stickers or make

scratches on discs.

A disc should always be kept in its

case when not in use to prevent from

damaging.

Always ensure that discs are clean

and dry before inserting .

Precautions For Disc

Wipe the disc from center

toward the outside edge

Do not touch the underside

of the disc

Label side up

Do not bend

Handling DISC

DISC CLEANING

use a dry soft cloth to wipe the surface .

If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing)

alcohol .

Never use solvents such as benzine,

thinner or conventional record cleaners

as they may mar the surface of the disc.

Preparing new discs with rough

spots

Roughness

Ball- point pen

New discs may have some roughness

around the edge . The Digital Video player

may not work properly or the video/sound

reproduction may skip if such discs

are used .

Note: use a ballpoint pen, etc ., To

remove roughness from the edge of

the disc .

P-5

NOTES:

Before finally installing the unit, connect the wiring temporarily and make sure

it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use

of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or

other modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

Choose the mounting location where the unit will not interfere with the normal

driving function of the driver.

If installation angle exceeds 30 from horizontal, the unit might not give its

optimum performance.

Avoid installing the unit where it would be subject to high temperature, such

as from direct sunlight, or from hot air, from the heater, or where it would be

subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded

screw holes at the sides of the unit chassis). For details, refer to the following

illustrated installation methods.

'

Installation

30

P-6

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove

the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into

left and right side of chassis as above illustration.

Installating the unit

DASH BOARD

METAL MOUNTING

STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET

HOUSING

HEX BOLT

SCREWDRIVER

TABS

KEY PLATE

PLASTIC TRIM OUT

KEY PLATE

P-7

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the

connectors on the back of the control panel and on the panel holder.

Detaching Control Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the “REL” release button and the right hand side of front pane will release

REL button

2). Put the front panel in the protective case for safe keeping.

protective case

1

2

1

2

First pull up the panel as the direction indicated by the arrow (See )And then

taking out the panel as the direction indicated by the arrow (See ).

Hollow

Bulge

ATTACHING CONTROL PANEL

P-8

1). First, insert the left side of the front panel into the main unit(SEE ).

(Note: the “Hollow ” point on the front panel must be attached into the “Bulge”

point of the unit . )

2). Gently push the right-down hand side of the front panel until you feel a “ Click” .

(SEE )

Precautions

Do not touch the contacts on the front panel or the unit body, since this may

result in poor electrical contact. If dirt or dust accumulates on the contacts ,

wipe them with a clean, dry cloth .

1

2

1

2

WIRING CONNECTION

P-9

Note:

the earth connection cable (parking brake B-) must be connected in order for

pictures to be played back to the monitor. If the cable has not been correctly

connected, the message “PARKING BRAKE” appears on the monitor.

RCA CABLE

SUBWOOFER GREY

VIDEO IN YELLOW

RCH RED

LCH WHITE

REAR RCA OUTPUT

CABLE

FRONT RCA WHITE L

FRONT RCA RED R

VIDEO OUT YELLOW

FRONT RCA OUTPUT

CABLE

REAR CAMERA INPUT YELLOW

PINK

(B+)12V

REAR CAMERA SWITCH

(B-)PARKING BRAKE

GREY

GREY/BLACK

FRONT

RCH SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

REAR

LCH SPK.

AUTO ANTENNA

BLUE

GROUND(B-)

MEMORY BACK-UP(B+)

IGNITION SWITCH(B+)

RED

YELLOW

BLACK

REAR

RCH SPK.

FRONT

LCH SPK.

CHOKE

BOX

RADIO ANTENNA JACK

TV ANTENNA JACK

Electric Connection

Note:

the Parking Brake wire must be

connected in order to watch

video on this unit . If that wire

has not been connected , then

the message “PARKING BRAKE”

will appear on the LCD screen .

BROWN

P-10

6

5

Button

Ref #

Function

1

2

CLK

Press it briefly to view the clock time .

PAIR/

Press it to use the BT function , refer to BT ope ration.

3

STOP

Press once to pause playback. Press PLAY/PAUSE to resume

playback. Please note: if you press STOP twice, playback will

start at the beginning of the disc.

SETUP

4

Press this button to open the SETUP menu.

MO/ST

(AUDIO)

In Radio mode, press this button to change between Mono and

Stereo reception modes (when a station is weak, sometimes

switching to Mono will improve sound quality). In Disc Playback

mode, pressing this button opens the AUDIO setup menu for

making changes to the way the soundtrack is reproduced.

SUBTITLE

LOCAL/

DISTANT

In Digital Video Disc Playback mode, pressing this button will allow

you to change the subtitle language on discs which have this as an

option.

In Radio mode, press this button to change the radio reception

sensitivity in stations are near or far.

Redial/

7

Press it to use the BT function , refer to BT ope ration .

15

17

19

13

14

7

2

6

24

11

18

3

16

5

20

1

21

27

9

12

10

4

8

26

23

22

25

MENUMENU

SETUP SETUP

ENTERENTER

11

22

33

44

55 66

77

88

99

00

VOLVOL

SELSEL

A/PSA/PS

MUTEMUTE

STOPSTOP

MO/STMO/ST

MODEMODE

CLKCLK

PLAY/PAUSEPLAY/PAUSE

EQEQ

ANGLEANGLE

BANDBAND

VOLVOL

OSDOSD

TITLE/PBCTITLE/PBC

LO/DXLO/DX

GOTOGOTO

10+10+

TOP

INT

RDM

REDIAL

PAIR

LOUD

RPT

ZOOMZOOM

Remote Control

P-11

Button

Ref #

Function

8

9

GOTO

Press it button to begin playback at a moment in the program you designate. Use

number buttons to enter the data that is needed. In BT menu, it serves as the

asterisk button on your mobile handset.

/

10

SEL

Press these buttons to skip ahead or back one track.

11

VOL+/-

Use these controls to adjust the volume level.

12

/ / /

Press this button briefly to display the root level directory of a

Digital Video disc. Press and hold this button to turn on or off the

SUBWOOFER output.

Menu

SubWoofer

( )

13

14

BAND

(OSD)

In Radio mode, press this button repeatedly to switch between

the five radio bands: FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2).

In Disc Playback modes, Press this button to see information

about the disc currently in play.

/MOD

15

Press this button to turn the unit ON , press and hold to turn the

unit OFF. Press it briefly to select a desired work source .

PLAY/

PAUSE

16

In Disc Playback mode, press to pause playback. Press again to

start where playback stopped.

MUTE

17

Press this button to turn off the audio. Press again to restore the

sound to its prior volume level.

TITLE/

PBC(A/PS)

18

When playing a Digital Video, pressing this button will open the TITLE

menu which is recorded on the media. When playing a VCD disc,

press this button to create a PBC (Playback Control) menu for the

disc to assist in making playback selections. In Radio mode,

press and hold this button to start the Auto-Program mode, during

which the tuner will scan for all strong stations and assign them

to the radio preset buttons.

Press this button to Open/Close the operate monitor .Long press

it to adjust the angle of monitor Upward/Downward.

19

ZOOM/

ANGLE

20

For Digital Video discs which have alternate viewing angles encoded,

when you see the "angle mark" symbol advising you that these

angles are available, longer press this button to see them.

Shortly press it button to increase the picture in size .

EQ/LOUD

21

Press repeatedly to cycle through the different equalizer curve

presets you may wish to use for enhanced listening. Press longer

to switch the LOUDNESS function ON and OFF .

22

In Disc Playback mode, press for fast forward playback.

In TV mode, Press it to search TV channel automatically.

SEARCH

Press to navigate the various menus present in the product.

In TV mode, press / to fine tune. Press the / to select

channel upward and downward.

Briefly press this button repeatedly to switch between BASS,TREBLE,BALANCE,

FADE,COLOR,BRIGHT,CONTRAST, TINT and VOLUME; Long press this button to

switch BT, then briefly press this button repeatedly to switch between LOUD,SWF,

EQ,DX/LOCAL(in radio mode),STEREO/MONO(in radio mode),TIME 24H/12H,

CLOCK,BUZZ,EUR/USA FREQ,ANIMA,BG and TV SYSTEM;After switching a

desired item above, press VOL+ or VOL- button to set.

P-12

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

3

4

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

Button

Ref #

Function

0-9

25

10+/

26

1-6

27

Six numbered preset buttons store and recall stations for each band

This button is used with the other number buttons for use with

two-digit number entries. In BT menu, it serves as the hash

button on your mobile handset.

23

ENTER

This button is used to confirm selections and settings within many

of the menus in the OSD system.

24

Use to input numerical values during programming, with the GOTO

button, or to directly select a track to play .

In TV mode, press it to ADD and DELETE channel .

In DISC mode, press it to reverse rapidly

SKIP

P-13

POWER ON/OFF

LOADING/EJECTING A DISC

Ejecting a Disc

In DISC mode, Press the (2) button on

the front panel to eject the disc .

Loading a Disc

3. The player starts playback the disc

automatically .

2. Insert the disc with printed side facing

up into the disc slot (1) .

1

2

1. Press the POWER ( ) button on the

front pane to turn the device on .

Touch the “ ” ICON on screen

to turn the unit off . Press the“ ”

on the front panel to turn it on,

press it again to turn off .

OPEN/CLOSE MONITOR AND

ANGLE ADJUSTMENT

Press OPEN button on front panel, the

monitor will draw out automatically .

OPEN/CLOSE button

FIG.1

When the monitor draws out to a certain

location, it will turn upward automa-

tically and stop at vertical position .

FIG.2

FIG.3

Do not rotate the monitor forcibly to

avoid mechanical damage .

FIG.4

Adjusting the viewing angle .

When the monitor does not move, you

press button on the panel to turn

the monitor upward or downward at

fine steps to get a desired viewing

angle .

Return the monitor to the central

viewing position, then press OPEN

button on the front panel , the monitor

will turn downward automatically .

FIG.5

Basic Operation

Touch the “ ” icon on touch screen

to enter the setting mode, the message

will display like following :

P-14

TINT: 0 to 32

Adjust the tint if the human skin color is

unnatural.

-Adjustable when “NTSC “ is selected for

“NTSC/PAL “ .

ADJUSTABLE ITEMS:

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker.

CONTRAST: 0 to 32

Adjust the contrast of the bright and dark

portion.

BRIGHTNESS: 0 to 32

Adjust if the picture is too bright or

too dark.

Touch “SYSTEM” on the setting menu,

touch the “ / ” ICONS to select the

adjustment item, touch the “ / ”

ICONS to adjust the selectment item, it

depends on your habit to setup the data.

When the monitor turns downward to

a certain angle, it will draw in .

FIG.6

TFT Monitor Adjustment

(1). (Power) icon

in any modes, touch the “ ” icon

to switch the unit off .

The touch buttons on the base of the

touch monitor:

(6). Icon

Touch to allow inserting or ejecting

of the media discs.

(2). Icon

to enter the setting menu.

(3). Icon

to adjust the angle of the monitor

upward until your desired angle .

(5). Icon

to adjust the angle of monitor down-

ward until your desired angle .

(4). Icon

Touch to open/close the monitor .

In Radio modes, touch the “ ”

icon or In media mode , touch the

range to enter the home menu,

the message like following as below.

(1)

(2) (5) (6)(4)(3)

COLOR

TINT

CONTRAST

16

SETTING ANIMATION

In RADIO mode, you can change the

playing time of animation among of

“OFF,10S, 30S, 1M, 1.5M, 2M, 3M and 4M”.

Note:

Please set the playing time of the

animation to “ 10S ” for the first, when

you turn the unit on .

P-15

AUDIO QUALITY ADJUSTMENT

In Radio modes, touch the screen of the

“ ” ICON to enter the home menu,

touch the “ ” ICON to enter the

Setting mode, the message will display

in the screen :

Touch the “ SOUND ” section on the

setting menu, touch the “ / ” ICONS

to select the adjustment item, touch the

“ / ” ICONS to adjust the selectment

item , It depends on your habit to select

the Audio mode . Then touch the “ ”

icon to return to the previous playback .

ADJUSTABLE ITEMS:

TREBLE: -7 to +7

Adjust treble level .

BALANCE: R 0-10 to L 0-10 .

Adjust sound balance between left

and right speakers .

FADE: F 0-10 to R 0-10

Adjust sound balance between front and

rear speakers .

BASS: -7 to +7

Adjust bass level .

Hour adjustment: 0-23

ADJUSTABLE ITEMS:

Minutes adjustment: 0-59

Time format selectment : 24H/12H

In SETTING mode, touch the “TIME”

range to select the time mode .

SETTING TIME

Touch the “ TIME ” section on the setting

menu, touch the “ / ” ICONS to

select the adjustment item, touch the

“ / ” ICONS to adjust the selectment

item, then touch “ ” icon to confirm.

It`s depend on your need to setup

the data.

SUB-WOOFER: ON or OFF

BT ON/OFF(for BT version only)

HOUR

MINUTE

24H/12H

11:36AM

TREBLE

BASS

06

SETTING WALLPAPER

in wallpaper mode, you can select the

among of “AUTO, GREEN, YELLOW, RED,

LIGHT BLUE, BLUE, PINK ” .

When you select the “AUTO” item, the

player will change the background

automatically .

DUB TV SYSTEM(for tv version only)

Change the TV standard among of the

“NTSC,PAL/BG, PAL/DK, PAL/I, PAL/M,

PAL/N, SECAM/BG, SECAM/DK”

LOUDNESS: ON or OFF

RADIO LOC: LOC or DX

RADIO STEREO: STEREO or MONO

BUZZER: ON or OFF

P-16

The RESET button is to be activated for

the following reasons:

A. Initial installation of the unit when

all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

Reset Factory Settings

RESET button is placed on the housing

and must be activated with either a

ballpoint pen or thin metal object.

RESET

Rear View Camera

When connecting the rear view camera

the mirror image of the rear view is auto-

matically displayed on the monitor

when you change the gear to the back

position.

(Note: additional monitor can not display

the image.)

Setting Audio Mode

In any modes, touch the “EQ” range on

the touch screen (or press the EQ button

on remote control) to select one of

the preset sound modes: JAZZ/CLASSIC

/POP/ROCK/USER .

POP

USER

ROCK

CLASSIC

JAZZ

It depends on your habit to select the

Audio mode .

The information will display in the

monitor as follow :

P-17

Control Panel

UNIT KEYS

2. and VOL KNOB

During playback e VOL knob

SEL BUTTON

, th is used to increase or decrease the volume.

To switch between BASS,TREBLE,BALANCE, FADE,COLOR,BRIGHTNESS,

CONTRAST, TINT and VOLUME, briefly and repeatedly press the SEL button.

After switching on the desired mode above, rotate VOL knob or press VOL+/

VOL- buttons to set it.

To switch between BT, LOUD, SWF, EQ, DX/LOCAL(in radio mode), STEREO/

MONO(in radio mode), TIME 12H/24H, CLOCK, BUZZ,EUR/USA FREQ,ANI-

MATION, BG and TV SYSTEM, long press SEL button to switch on BT, then briefly

and repeatedly press SEL button.

After switching on the desired mode above, rotate VOL knob or press VOL+/VOL-

buttons to set it.

16 17

1. OPEN or BUTTON

To slide the monitor out and stand it up or into the monitor slot, press this button;

To adjust the angle of the monitor, long press this button .

2

3

4 5 6

7

9

1

10

8

12

13

14

-

+

11

15

18

P-18

6. BAND/PAIR BUTTON

In radio mode, press the BAND repeatedly to select the desired radio band: FM1,

FM2, FM3, AM1(MW1) and AM2(MW2) .

In BT PHONE mode, for the function of the PAIR button, please refer to the part of

the BT Operation.

4/10. |<</ and >>|/ BUTTONS

In radio mode, Long pressing |<< or >>| button can automatically search down or up

for an available station beginning from the current frequency; Briefly pressing |<< or

>>| button can manually search down or up for a your desired station beginning from

the current frequency.

In media mode, pressing |<< or >>| button can play previous or next track; conti-

nuously and long pressing |<< or >>| button can fast backwards or forwards at the

following multiple of normal speed: x2, x4, x8, x20, x1.

In BT PHONE mode, for the function of the and buttons, please refer to the

part of the BT Operation.

7. MUTE BUTTON

Short press this button to mute or resume sound.

5. Disc Slot

8. >||/CH1-6 BUTTON

In media mode, use this button to pause or resume playback.

In radio mode, use this button to preset or listen to a memory station

1) To preset a station in a memory bank with CH1-6 button, first select a desired band;

then press CH1-6 button to select a desired memory bank; and then search for a

desired station; finally long press CH1-6 button to store the station in the memory

bank.

2) To listen to a preset station with CH1-6 button, first switch on a desired band, then

continuously press CH1-6 button highlight and listen to it.

3. (POWER On/Off )/MODE

ress it to turn on the unit, to the .

In mode, Press it repeatedly to select RADIO ,

mode.

Short p long p it turn off unit

power on DISC, USB, CARD, TV,

AV IN or BT MUSIC

ress

P-19

14. AUX IN JACK

13. USB PORT and COVER

15. LCD display

12. IR sensor

17. RESET BUTTON

When LCD displays wrongly or some buttons are not available or sound is

distorted, press REL button to detach the control panel and remove it, then use

the sharp end of a pointed object to press RESET button on control panel to

reset the program to zero.

16. SD/MMC card slot

11. (EJECT) BUTTON

During disc playback, press this button to eject the disc. After the diss is ejected,

press this button to draw the disc in again.

9. REL BUTTON

To detach control panel, press REL button on control panel.

After detaching control panel, hold the right part of the control panel and pull it

upwards a little and then to you to remove it from chassis.

18. MICROPHONE

Page is loading ...

Premier SCR-4606TVD User manual

Premier SCR-4606TVD User manual

Related papers

Other documents