Premier BB-5312USBTB User manual

Brand: Premier

Model: BB-5312USBTB

Type: User manual

INSTRUCTION MANUAL

RECHARGEABLE MULTIMEDIA SPEAKER

BB-5312USBTB

DEAR CUSTOMER

In order to achieve the best performance of your product, please read this instruction manual carefully

before using, and keep it for future reference.

If you need extra support, please write to [email protected]

P-1

CAUTION

RISK OF ELECTRIC

SHOCK, DO NOT

OPEN

Caution: To reduce the risk of electric shock do not open

this device, there are not serviceable parts for customers.

Please refer any maintenance or repair to qualified

personnel.

This sign means the existence of dangerous voltage at

the inside of the unit, which states a risk of electric shock.

This sign means that there are important instructions of

operation and handling in the manual that comes with this

device.

PREMIER CUSTOMER SERVICE

Venezuela:

0800 – ELECTRIC (353-2874)

Panama:

507 300-5185

Website

www.premiermundo.com

E-mail:

[email protected]

NOTE

This unit may be submitted to changes in specifications, characteristics and/or operation without prior

notice to the user, in order to continue improving and developing its technology.

P-2

PORTABLE MULTI-MEDIA SPEAKER SYSTEM

-- ‐ Please read this manual carefully before starting to use the unit. -

Thank you for purchase

PREMIER

product. Your new multi-media music player can support different types of

flash memory. It can read USB Flash Drive and SD/MMC Flash Memory Cards. It is also a FM radio with FINE

TUNE, STATION SEEK and AUTO MEMORY STATION functions. Your unit is also incorporated

BLUECONNECT

device act as an external amplified speaker for your other Blue-Connect music playback devices such

as personal computer, MP3/MP4 player, mobile phones and etc..

Supporting maximum memory size of USD/SD to 32GB

REMOTE CONTROL FUNCTIONS

1. : To turn the unit on for music playback or standby mode (decorating LEDs will stay on).

STOP

: When the unit is operating USB/SD playback mode, press this button to permanently stop playing

the source file. You need to press to restart playback.

3. : Pressing this button to mute the unit’s speaker output at anytime. Press again to resume speaker

output.

MODE

: Change the playback source mode in sequence of BLUE CONNECT/LINE/FM/USB,SD

5. : When playback from the USB/SD source, pressing this button to set repeat playback setting (Single or

All track repeat).

: Under USB/SD source playback mode, press this button to select preset audio mode to suit your

listening pleasure (NORMAL/BASS/POP/ROCK/JAZZ/CLASSIC/COUNTRY) showing on LED display).

7. : Previous song for USB/SD playback. Previous channel for radio operation

8. : Next song for USB/SD playback. Next channel for radio operation

9. : During USB/SD playback mode, press this button to pause the playback. Press again to resume

playback. During FM radio mode, Long press to start auto-scan stations. Then Short press it again to stop

the auto-scan.

10. : Volume decrease.

11. : Volume increase.

12.

The number keys 0 – 9

: During USB/SD playback mode, press the number combination to designate

that song number to start playback. During Radio Channel or Radio Frequency mode, press the number

combination to select the Channel number to play. (Note: When done pressing the number combination,

just wait 2 seconds and the system will automatically confirm your input).

P-3

CONTROLS ON LED DISPLAY KEY PAD

1. SD/MMC CARD Slot: Insert the SD/MMC card into the SD/MMC card slot, system will automatically

playback song on the memory card inserted. Or, you can press the MODE button until it shows SD on the

LED display to play songs from the already inserted memory card.

2. USB Slot: Insert the USB Flash Drive into the USB slot, system will automatically playback songs on the

USB Flash. Or you can press the MODE button until it show USB on the LED display to play songs from

the already inserted USB Flash.

3. MODE : Press the MODE key until your desired playback source is selected. The cycling sequence of

mode selection is: Blue-Connect/LINE/FM/USB,SD.

4. PREV/VOL- : During USB/SD playback, short press this button to select previous song, long press to

reduce input source volume. During Radio Channel mode, short press to move to previous pre-

memorized station channel number, long press to reduce volume.

5. PLAY: During USB/SD playback, press this button to pause the playback. Press again to resume playing

and vice versa. During Radio mode, long press this button to initiate memory station search. System will

scan from lowest FM frequency to highest FM frequency and store all station signals in sequence of

channel number. Short pressing this button to stop searching during the auto-scan.

6. NEXT/VOL+ : During USB/SD playback, short press this button to select next song, long press to reduce

input source volume. During Radio Channel mode, short press to move to next pre-memorized station

channel number, long press to increase volume.

7. EQ: : Select EQ modes: NORMAL/BASS/POP/ROCK/JAZZ/CLASSIC/COUNTRY

OTHER CONTROLS OR CONTROLS ON BACK SIDE OF THE UNIT

1. EARPHONE: This is the output socket for collecting the 3.5mm earphone.

2. Red LED: This indicates when battery is charging.

The Blue LED light on means the battery is charged fully.

3. 3.5mm Socket (LINE-IN): This is for connection of external audio input source.

4. Main Volume Knob (VOL): Turn to increase or decrease of master speaker volume.

5. POWER Switch: This is the master power switch for the device.

6. DC-9V socket (DC-9.0V): This is for the 9 Volt DC input power source both for playback and/or charging.

You can connect through the USB charging cable provided with this package and connect to the power

switch to charge this device.

7. Retractable antenna: For better FM Radio reception, please pull out and extend fully while receiving radio

signal.

This battery logo on the LED display indicates the speaker is enough in battery.When it is flashing, It

indicates the speaker battery is low.It is a normal situation when the speaker playing is been cut down or

restart.

P-4

9. MIC VOL: This Knob to increase or decrease the volume of Micphone

10. ECHO : This Knob to increase or decrease the volume of MIC ECHO

11. MIC1/MIC2 : These two Sockets for the cable Micphone connection

BLUE-CONNECT INTRODUCTION

1. The Blue-connect

module

is built

in the PCB of the speaker system which could connect with other Blue-

connect device for audio

decoding. Operation steps:

I. Turn on the speaker, it automatically works in Blue-connect mode within several seconds.

II. When you see the LED display “BLUE” is flashing, it means the Blue-connect device of the speaker is waiting

for connection with other Bluetooth device.

III. Use your mobile phone/Notebook/Tablet PC/MID etc Bluetooth device searching, you will find the speaker’s

Blue-connect device mode

”BB-5312 USBTB”

in your Bluetooth device. Click connect after several seconds,

you will hear the sound “Beep” and the LED display “BLUE” is not flashing which means it connects successfully.

You can play music now.

IV. IV. If connection failed, please try to turn off the speaker system and restart the speaker meanwhile reset your

under matching Blue-connect device for repeating the operation of connection until it matches successfully.

V. Then you can choose the music playing from your Bluetooth device and operate it by remote control as well as

the buttons on the panel.

SPECIFICATION:

Outer put: 9.5W

Frequency: 100HZ---18KHZ

S/N: ≥75db

Power supply: DC 9V-USB

Built-in Lion battery: 7.4V 2000MAH

Dimension: W220 x D168x H335mm

P-5

CIRCUIT DIAGRAM

1 2 3 4 5 6 7

87654321

SD-CMD

SD-CLK

SD-DAT0

4 5

IC18

24C08

R126

10K

ANT

VCC3.3V

I2C-SDA

I2C-CLK

R123

XOSCO

I2C-CLK

I2C-SDA

R10

DATA2

DATA3

CMD

VSS

VDD

CLK

VSS

DATA0

DATA1

Detect1

Detect2

GND

SD1

R62

2.2R

C106

475

FM-ROUT

CK2

PHONE-4

R127

15K

R130

47K

C135 105

LINE IN

LINE-DET

FM-LOUT

AUX

GND

DP+

DN-

USB1

USB

C20

4.7uF

C30

106

C27

103

C23

103

300K

VCC

ALO

ARO

AGND

RFI

INT

XLCK

GND

SCL

SDA

IC11

QN8035

C29

101

330NH

2.5K100MHz

C31

100P

VCC3.3V

IC14

2399

4 5

IC15

4558

C103

47U/10V

C57

104

C60

104

C56

104

C59

104

R60

15K

R65

15K

R79

200K

R63

10K

R55

15K

C61

561

C71

392

C55

561

C54

392 R57

15K

R61

1K5

R56

10K

C68

105

C83

104

C58

104

R89

R77

68K

R64

10K

R119

C74

105

C87

682

C85

105

C69

105

ECHO-OUT

R74

100K

R76

100K

C82

106

C50

104

C101

104

R54

12K

C102

100U/10V

DACL

DACR

C39

225P

C52

225P

JACK1

PHONE-4

C32 106

C38 106

P-DET

DACL

DACR

R38

CON3

WX-MIC

R31

22K

4148

R35

47K

8V4

R29

10K

9014

R39

47K

9014

8V4

C45

470U/10V

C46

105

MIN

C84

102

E-OUT

R71

47K

C78

101

GPIO1

GPIO2

GND

FMIN

GND

XTAL

SCLK

SDIO

RCLK

VDD

GND

LOUT

ROUT

GND

IC16

9950

C89

104

R78

4R7

R120

10M

C88105

CON9

BASS-OUT

C77

10P/NC

C73

224

R73

5K1

R70 10K

C136

106

C137

105

R32

10K

MIN-DET1

C90

100uF

C94

104

R121

4R7-1W

C93

100uF

C91

104

IC17

S1117-5V

8V4 5V

D12

SS14

C95

104

4V7

R14

2K2

R44

2K2

R/L-OUT

MVOL-IN

MVOL-OUT

R59

18K

E-OUT

R66

MUTE

AB/D-10W

4V7

CON10

T1-OUT

R131

100M600R

R132

100

M600R

C138

1NF

C141

1NF

R/L-OUT

9014

R11

560R

CB1

CB2

LED1

10K

8V4

VR4

ECHO

HEADER 3

VR3

MIC-VOL

MVOL-IN

ADKEY1

CON6

BAT

JP2

9V-DCIN

1000U/10V

CON4

MIC1

CON5

MIC2

C139

10uF

CON8

ON/OFF

8V4

R34

47R

M-LED

C43

472

C49

103

R42

47K

REC-IN

D10

D11

R122

2R2-1W

C72

222

R69

2K2

C75

105

R72

10K

OUT

C62

104

8550

R46

4K7

R50

4K7

R51

1K2

R47

4K7

Q10

8550

R45

10K

SD-CLK

-CMD

SD-DAT0

VCC3.3V

MUTE

AUXR1

XOSCO

AUXL1

ADKEY1

475

C10

475

C15

475

DACL

DACR

C16

475

C19

15pF

C1715pF

Y232.768K

C18

105

300K

P37

VDDHP

P01

P02

P00

VDDIRT

IRTOSCI

IRTOSCO

IRTWKO

P17

P16

P15

P14

P13

P12

P11

P10

P34

P33

P32

P31

P30

P27

P26

P25

P35/UDSW

P24

P23

P22

P21

P20

USBDM

USBDP

P36/VPG33

VDDLDO

VDDIO

VDDDAC

DACR

VCM

DACL

VSSDAC

P07/VPP

P06

P05

P04

P03/VB

VDDCORE

VSS

IC10

AX2225_LQFP48

C11

105

C41

106

AX2220-RX

AX2220-TX

AX2220-CTS

IC12

SPI-CS

LED1

DC-DET

R17

BAT

VCC3.3V

I2C-SDA

I2C-CLK

LINE-DET

R16

10K

C40

102

VCC3.3V

BAT

REC-IN

FM-ROUT

FM-LOUT

MIN-DET1

LED1

4 5

IC13

FLASH

R19

VCC3.3V

C70

106

I2C-CLK

SPI-CS

I2C-SDA

CON2

R125

100K

R124

200K

DC-DET

P-DET

CON11

T2-OUT

C140

10uF

4V7

C48

472

C21

472

R128

15K

R129

47K

C115 105

R20

R25

R21

R26

R24

R28

R67

R68

CON7

100K

Premier BB-5312USBTB User manual

Premier BB-5312USBTB User manual

Premier BB-5312USBTB User manual

Related papers

Other documents