Pyle PLTS78DUB User manual

PLTS78DUB

USER MANUAL

7'' Single DIN In-Dash Detachable Motorized Touch Screen TFT/LCD Monitor

w/ DVD/CD/MP3/MP4/USB/SD/AM-FM Bluetooth A2DP & AVRCP compatible

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

Content

-1-

Precaution......................................

Safety Information.........................

Disc Note.......................................

Installation ....................................

Electric Connection ......................

Remote Control ............................

Basic Operation ............................

Loading/Ejecting a DISC .................

Open/Close the Monitor and Angle

Adjustment ....................................

TFT Monitor Adjustment ................

Setting animation............................

Setting wallpaper............................

Setting LED Light............................

Audio Quality Adjustment ................

Setting Time ...................................

Setting Audio Mode .........................

Reset Factory Settings ...................

Rear

View Camera ........................

Alternate Audio Source....................

Control Panel ................................

Unit keys ........................................

Radio Operation ...........................

Listening to radio............................

Storing and listening to a memory

station............................ ..............

Automatic memory storing &

Program Scanning............ ............

RDS function..................................

Media Operation...........................

25

27

28

29

31

32

33

34

35

37

38

39

40

41

2

3

4

5

9

10

13

14

15

16

17

20

21

24

Basic Operation ..............................

Selecting Play Mode ........................

On-Screen Display Function .............

Digital Vid eo Special Function........

Multi-Subtitle Language function.......

Multi-audio language Function..........

Ti tle menu function ..........................

Media Setup Menu..........................

System Setup..................................

Language Setup..............................

Vid eo Setup ....................................

Digital Setup ...................................

AUX Operation ..............................

BT Operation .................................

USB Operation ..............................

SD/MMC Card Operation ................

MP3/WMA/JPEG/MPEG4 Play .........

Specification .................................

Troubleshooting ............................

-2-

Precaution

THANK YOU FOR PURCHASING THIS CAR DIGITAL VIDEO PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy

for future reference .

To avoid injury or accident , read the following precautions before

installing and operating the unit .

ABOUT

THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press on the LCD panel on the unit as doing so can distort the

picture or cause a malfunction . The picture may become unclear , or the

LCD panel may be damaged .

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available

cleaners or antistatic spray .

- Do not use alcohol to clean the screen .

If your car was parked in a cold or hot place, the picture may not be clear .

The monitor is not damaged . The picture will become clear the temper-

ature in your car becomes normal

.

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this

may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this

may result in a fatal accident.

- it

may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving.

IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED

to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake

wire is connected to

the parking brake system built in the car ( refer to the electric connection)

ON INSTALLATION

-3-

Safety Information

CAUTION:

THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER

THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM

WHICH COULD CAUSE .

HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE

THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT

REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING

INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE

IS INTENDED FOR CONTINUOUS OPERATION.

REGION MANAGEMENT INFORMATION:

This Digital Video Player is designed and manufactured to respond to the Region

Management Information that is recorded on a Digital Video disc. If the Region

number described on the Digital Video disc does not correspond to the Region

number of this

Digital Video Player, this Digital Video Player cannot play this disc.

-4-

Disc Note

Preparing New Discs with Rough

Spots

A new disc may have rough edges on

its inside and outside edges. If a disc

with rough edges is used, the proper

setting will not be performed and the

player will not play the disc. Therefore,

remove the rough edges in advance

by using a ball point pen or pencil

as

shown on the right. To remove the

rough edges, press the side of the pen

or pencil against the inside and outside

edges of the disc.

Rough spots

on

outside edge

Ball point pen

or pencil

Rough spots

on inside

edge

Do not touch

the

underside

of the disc

Do not

bend

Wipe the disc from

center

toward the outside

edge

Label side

up

Disc Cleaning

Use a dry soft cloth to wipe the surface.

If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing)

alcohol. Never use solvents such as

benzine, thinner or conventional record

cleaners as they may mar the surface of

the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation.

Do not place stickers or make

scratches on discs.

Do not warp discs.

A disc should always be kept in its

case when not in use to prevent from

damaging.

Do

not place discs in the following

places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Discs which cannot be played

with this player

Digital Video-RAM

CDV

CDG

Note:

A disc may become somewhat scratched

(although not enough to make it

unusable) depending on your handle it

and conditions in the usage environment.

Note these scratches are not an

indication of any problem with the player.

Disc formats supported by this

player

Digital

Video

VCD

CD

MP3

Audio and Video

Disc size 12 cm

Audio and Video

Disc size 12 cm

Audio

Disc size 12 cm

Audio

Disc size 12 cm

Digital

Video

VCD

CD

MP3

NOTES:

Choose the mounting location where the unit will not interfere with the normal

driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure

it is all connected up properly and the unit and the

system work properly.

Use only the parts included with the unit to ensure proper installation. The use

of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or

other modifications of

the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give

its

optimum performance.

Avoid installing the unit where it would be subject to high temperature, such

as from direct sunlight, or from hot air, from the heater, or where it would be

subject to dust, dirt

or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded

screw holes at the sides of the unit chassis). For details, refer to the following

illustrated installation methods.

'

Installation

-5-

30

Installation

-6-

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove

the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into

left and right side of chassis as above illustration.

Installating the unit

DASH BOARD

METAL MOUNTING

STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET

HOUSING

HEX BOLT

SCREWDRIVER

TABS

KEY PLATE

PLASTIC TRIM OUT

KEY PLATE

-7-

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the

connectors on the back of the control panel and on the panel holder.

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the “REL” release button and the right hand side of front pane will release

REL button

2). Put the front panel in the protective case for safe keeping.

protective case

1

2

1

2

First pull up the panel as the direction indicated by the arrow (See )And then

taking out the panel as the direction indicated by the arrow (See ).

Hollow

Bulge

ATTACHING THE FRONT PANEL

Installation

-8-

1). First, insert the left side of the front panel into the main unit(SEE ).

(

Note: the “Hollow ” point on the front panel must be attached into the “Bulge”

point of the unit . )

2). Gently push the

right-down hand side of the front panel until you feel a “ Click” .

(SEE )

Precautions

Do not touch the contacts on the front panel or the unit body, since this may

result in poor electrical contact. If dirt or dust accumulates on the contacts ,

wipe them with a clean, dry cloth .

1

2

1

2

Electric Connection

WIRING CONNECTION

-9-

Note:

the earth connection cable (parking brake B-) must be connected in order for

pictures to be played back to the monitor. If the cable has not been correctly

connected, the message “PARKING BRAKE” appears on the monitor.

RCA CABLE

SUBWOOFER GREY

VIDEO IN YELLOW

RCH RED

LCH WHITE

REAR RCA OUTPUT

CABLE

FRONT RCA WHITE L

FRONT RCA RED R

VIDEO OUT

YELLOW

FRONT RCA OUTPUT

CABLE

REAR CAMERA INPUT YELLOW

BROWN

(B+)12V

REAR CAMERA SWITCH

(B-)PARKING BRAKE

GREY

GREY/BLACK

FRONT

RCH SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

REAR

LCH SPK.

AUTO ANTENNA

BLUE

GROUND(B-)

MEMORY BACK-UP(B+)

IGNITION SWITCH(B+)

RED

YELLOW

BLACK

REAR

RCH SPK.

FRONT

LCH SPK.

CHOKE

BOX

RADIO ANTENNA JACK

ISO CONNECTOR

PINK

Remote Control

-10-

6

5

Button

Ref #

Function

1

2

CLK

Press it briefly to view the clock time .

PAIR/

Pres s it to us e the BT fun ct ion , ref er to se e BT oper at ion .

3

STOP

Press once to pause playback. Press PLAY/PAUSE to resume

playback. Please note: if you press STOP twice, playback will

start at the beginning of the disc.

SETUP

4

Press this button to open the SETUP menu.

MO/ST

(AUDIO)

In Radio mode, press this button to change between Mono and

Stereo reception modes (when a station is weak, sometimes

switching to Mono will improve sound quality). In Disc Playback

mode, pressing this button opens the AUDIO setup menu for

making changes to the way the soundtrack is reproduced.

SUBTITLE

LOCAL/

DISTANT

In Digital Video Disc Playback mode, pressing this button will

allow you to change the subtitle language on discs which have

this as an option.

In Radio mode, press this button to change the radio reception

sensitivity in stations are near or far.

Redial/

7

Pres s it to use the BT funct ion , ref er to see BT oper ation .

15

17

19

13

14

7

2

6

24

11

18

3

16

5

20

1

21

27

9

12

10

4

8

26

23

22

25

MENU

SETUP

ENTER

1

2

3

4

5 6

7

8

9

0

VOL

SEL

A/PS

MUTE

STOP

MO/ST

MODE

CLK

PLAY/PAUSE

EQ

BAND

VOL

OSD

TITLE/PBC

LO/DX

GOTO

+10

TOP

INT

RDM

REDIAL

PAIR

LOUD

RPT

ZOOM

TA

AF

Remote Control

-11-

Button

Ref #

Function

8

9

GOTO

Press it button to begin playback at a moment in the program you

designate. Use number buttons to enter the data that is needed.

In BT menu, it serves as the asterisk button on your mobile

handset.

/

10

SEL

Press these buttons to skip ahead or back one track.

11

VOL+/-

Use these controls to adjust the volume level.

12

///

Press this button briefly to display the root level directory of a

Digital Video disc. Press and hold this button to turn on or off the

SUBWOOFER output.

Menu

SubWoofer

( )

13

14

BAND

(OSD)

In Radio mode, press this button repeatedly to switch between

the five radio bands:

FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2).

In Disc Playback modes, Press this button to see information

about the disc currently in play.

/MOD

15

Press this button to turn the unit ON , press and hold to turn the

unit OFF. Press it briefly to select a desired work source.

PLAY/

PAUSE

16

In Disc Playback mode, press to pause playback. Press again to

start where playback stopped.

MUTE

17

Press this button to turn off the audio.

Press again to restore the

sound to its prior volume level.

TITLE/

PBC(A/P)

18

When playing a Digital Video, pressing this button will open the

TITLE menu which is recorded on the media. When playing a VCD

disc, press this button to create a PBC (Playback Control) menu

for the disc to assist in making playback selections. In Radio

mode, press and hold this

button to start the Auto-Program mode,

during which the tuner will scan for all strong stations and assign

them to the radio preset buttons.

Press this button to Open/Close the operate monitor .Long press

it to adjust the angle of monitor Upward/Downward

19

ZOOM

20

Shortly press it button to increase the picture in size .

EQ/LOUD

21

Press repeatedly to cycle through the different equalizer curve

presets you may wish to use for enhanced listening. Press longer

to switch the LOUDNESS function ON and OFF .

22

In Disc Playback mode, press for fast forward playback.

Press to navigate the various menus present in the product.

Briefly press this button repeatedly to switch between BASS,TRE, BAL,FADE,

COLOR,BRIGHT,CONTR, TINT and VOL; Long press this button to switch BT,

then briefly press this button repeatedly to switch between REG,PI,TA,AF,

LOUD,SWF,EQ,DX/LOCAL(in radio mode),STEREO/MONO(in radio mode),

TIME 24H/12H, SET CLOCK,BUZZ,EUR/USA FREQ,ANIMA,BG and LED;

After switching a desired item above, press VOL+ or

VOL- button to set.

Remote Control

-12-

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See

).

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

3

4

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

Button

Ref #

Function

0-9

25

+10/

26

1-6

27

Six numbered preset buttons store and recall stations for each band

This button is used with the other number buttons for use with

two-digit number entries. In BT menu, it serves as the hash

button on your mobile handset.

23

ENTER

This button is used to confirm selections and settings within many

of the menus in the OSD system.

24

Use to input numerical values during programming, with the GOTO

button, or to directly select a track to play .

In Radio mode, (when the RDS engaged,), 0 serves as TA function,

9 serves as the AF function .

In DISC mode, press it to reverse rapidly

0/TA

9/AF

Basic Operation

-13-

POWER ON/OFF

LOADING/EJEC TING A DISC

Ejecting a Disc

In disc mode, Press the (2) button on

the front panel to eject the disc .

Loading a Disc

3. The player starts playback the disc

automatically .

2. Insert the disc with printed side facing

up into the disc slot (1) .

1

2

1. Press the POWER ( ) button on the

front pane to turn the device on .

Touch the “OFF” ICON on screen

to turn the unit off . Press the“ ”

onthe front panel to turn It on,

press it again to turn off .

OPEN/CLOSE MONITOR AND

ANGLE ADJUSTMENT

Touch OPEN button on front panel, the

monitor will draw out automatically .

OPEN/CLOSE button

FIG.1

When the monitor draws out to a certain

location, it will turn upward automa-

tically and stop at vertical position .

FIG.2

FIG.3

Do not rotate the monitor forcibly to

avoid mechanical damage .

FIG.4

Adjusting the viewing angle .

When the monitor does not move, you

press button on the panel to turn

the monitor upward or downward at

fine steps to get a desired viewing

angle .

Return the monitor to the central

viewing position, then press OPEN

button on the front panel , the monitor

will turn downward automatically .

FIG.5

Basic Operation

-14-

(3) (5)

(1) (2)

(6)(4)

(2). OFF (Power) button

in any modes, touch the “ OFF ” ICON

to switch the unit off .

(1). SET button

touch to enter the SETTING mode .

(5).

Button

to adjust the angle of monitor down-

ward until your desired angle .

(6). Button

to adjust the angle of the monitor

upward until your desired angle .

(3). Button

Touch to close the monitor .

(4). Button

Touch to eject the disc form the

disc slot.

TFT Monitor Adjustment

In Radio mode, touch the“ RADIO ”

icon or In media mode , touch the

range to enter the home menu,

the message like following as below.

When the monitor turns downward to

a certain angle, it will draw in .

FIG.6

Touch the “SE T” ICON on touch screen

to enter the setting mode, the message

will display like following :

Touch “SYSTEM” on the setting menu,

touch the “ / ” ICONS to select the

adjustment item, touch the “ / ”

ICONS to adjust the selectment item, it

depends on your habit to setup the data.

TINT: 0 to 32

Adjust the tint if the human skin color is

unnatural.

-Adjustable when “NTSC “ is selected for

“NTSC/PAL “ .

ADJUSTABLE ITEMS:

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker.

CONTR AST: 0 to 32

Adjust the contrast of the bright and dark

portion.

BRIGHT: 0 to 32

Adjust if the picture is too bright or

too dark.

BRIGHTNESS

CO NTRAST

COLOR

15

ANIMATION

In RADIO mode, you can change the

playing time of animation among of

“OFF, 10S, 30S, 1M,1.5M, 2M, 3M and 4M ”.

Note:

Please set the playing time of the ani-

mation to “ 10S ” for the first, when you

turn the unit on .

Note: the RDS icon displays only when

setting EUR FREQ and power off the unit

and then power on again.

-15-

Basic Operation

SETTING LED LIGHT (3 COLORS)

In LED COLOR mode, you can select the

color among of “Auto, Blue, Red, Pink ” .

When you select the “AUTO” item, the

player will change the panel color

illumination automatically .

BT ON/OFF

Touch to switch the BT

function ON and OFF .

AUDIO QUALITY ADJUSTMENT

In Radio mode, touch the screen of the

“ RADIO ” ICON to enter the home menu,

touch the “ SET ” ICON to enter the

Setting mode, the message will display

in the screen :

TREBLE

BASS

+06

Touch the “ SOUND ” section on the

setting menu, touch the “ / ” ICONS

to select the adjustment item, touch the

“ / ” ICONS to adjust the selectment

item , It depends on your habit to select

the Audio

mode . Then touch the “SE T”

icon to return to the previous playback .

ADJUSTABLE ITEMS:

TREBLE: -7to +7

Adjust treble level .

BASS: -7 to +7

Adjust bass level .

BALANCE: R 0-10 to L 0-10 .

Adjust sound balance between left

and right speakers .

SUB-WOOFER: ON or OFF

FADE: F 0-10 to R 0-10

Adjust sound balance between front and

rear speakers .

Hour adjustment: 0-23

ADJUSTABLE ITEMS:

Minutes adjustment: 0-59

Ti me format selectment : 24H/12H

In SETTING mode, touch the “TIME”

range to select the time mode .

SET TING TIME

Tou c h the “ TIME ” section on the setting

menu, touch the “ / ” ICONS to

select the adjustment item, touch the

“ / ” ICONS to adjust the selectment

item, then touch “ SET ” icon to confirm.

It`s depend on

your need to setup

the data.

HOUR

MINUTE

24H/12H

11:36 AM

SETTING WALLPAPER

in wallpaper mode, you can select the

among of “AUTO, G REEN, YELLOW, RED,

LIGHT BLUE, BLUE, PINK ” .

When you select the “AUTO” item, the

player will change the background

automatically .

Note: the RDS icon displays only when

setting EUR FREQ and power off the unit

and then power on again.

Note: the RDS icon displays only when

setting EUR FREQ and power off the unit

and then power on again.

LOUDNESS: ON or OFF

RADIO LOC: LOC or DX

RADIO STEREO: STEREO or MONO

BUZZER:

ON or OFF

-16-

Basic Operation

The RESET button is to be activated for

the following reasons:

A. Initial installation of the unit when

all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

Reset Factory Settings

RESET button is placed on the housing

and must be activated with either a

ballpoint pen or thin metal object.

RESET

Rear Vi e w Camera

When connecting the rear view camera

the mirror image of the rear view is auto-

matically displayed on the monitor

when you change the gear to the back

position.

(Note: additional monitor can not display

the image.)

Setting Audio Mode

In any modes, touch the “EQ” range on

the touch screen (or press the EQ button

on remote control) to select one of

the preset sound modes: ROCK/POP/

JAZZ/CLASSIC/USER .

POP

USER

ROCK

CLASSIC

JAZZ

It depends on your habit to select the

Audio mode .

The information will display in the

monitor as follow :

EX.: In RADIO mode

87.50

FM1

MHZ

DX

ST

USER

1 2

388.50 90.00

98.00

65

4

80.50

103.00

103.00106.00

ALTERNATE AUDIO SOURCE

On the front panel of the unit , there is an

AUX IN jack, to connect analogue replay

devices. Use this jack to replay sound of

other replay equipment such as

Digital Video players, computers, etc.

Via the loudspeakers.

1). Please f

connect the external device with stereo

jack plug the AUX

IN socket .

2). Press the MOD button to select the

AUX IN connection.

3). Use the buttons on the external

device itself to operate it .

ollowing the diagram below,

AUX IN

Hea phon s port

de

AX IN

U

-17-

UNIT KEYS

Control Panel

2 3

4

5 6

7

9

1

11

10

8

12 13 14 15

17 16

18

MU/PTY

/CH1~6

MODE

OPEN

VOL-

VOL+

AUX IN

PUSH SEL

USB IN

TA/AF

IR

BND

PAIR

MIC

3. (POWER On/O ff )/MODE

Press it to turn on the unit, to switch the device off.

In playback mode, Press it repeatedly to select RADIO, DISC, USB, CARD, AUX

IN and BT MUSIC mode.

Press and hold for two seconds

2. VO L & SEL

In normal mode, knob is used to increase or decrease the volume.

KNOB BUTTON

VOL

Briefly press SEL button repeatedly to switch between BASS,TRE,BAL,FADE,

COLOR,BRIGHT,CONTR, TINT and VOL; Long press SEL button to switch BT,

then briefly press SEL button repeatedly to switch between REG, PI, TA, AF,

LOUD,SWF, EQ,DX/LOCAL(in radio mode),STEREO/MONO(in radio mode),

TIME

24H/12H, SET CLOCK, BUZZ,EUR/USA FREQ, ANIMA,BG and LED;

After switching a desired item above, rotate VOL knob to set.

Control Panel

Front Face of Chassis after remo ving Control Panel

1. OPEN or BUTTON

To slide the monitor out and stand it up or into the monitor slot, press this button;

To adjust the angle of the monitor, long press this button .

Control Panel

-18-

7. MU/PTY BUTTON

Press it button to switch of the loudspeakers for a short period. The word MUTE

flashes in the display. Press it again to cancel the mute function. This function

can also be cancelled by rotating the VOL multifunction button.

In

Radio Mode, press this button and hold for a bout 2 seconds to select the PYT

of the grogram type (examples of such types of program are : NEWS, POP.....)

4/10. >>|/ and |<</ BUTTONS

In radio mode, Long

pressing |<< or >>| button can automatically search down

or up for an available station beginning from the current frequency; Briefly

pressing |<< or >>| button can manually search down or up for a your desired

station beginning from the current frequency.

In media or BT MUSIC mode, pressing |<< or >>| button can play previous or

next track; continuously and long pressing |<< or >>| button can fast backwards

or forwards at the following multiple of normal speed: x2, x4, x8, x20,

x1.

* In BT MUSIC mode, the function of the fast forwards or backwards is disabled.

In BT PHONE mode, for the function of the and buttons, please refer to

the part of the BT Operation.

5. TA/AF BUT TON

TA Function [traffic Announcement] Button(for Rds Only)

In RADIO mode

When you swing briefly the MU/PTY knob in the direction of the TA/AF button ,

the TA function is activated, the TA symbol appears in the display .

(swing

it again to turn off . )

AF [Alternative Frequencies]

Swing and hold (more than 2’s) the MU/PTY knob in the TA/AF direction , the AF

function is activated. The AF symbol appears in the display . (swing and hold it

again to cancel this function .) The function about RDS to see page 23 .

Note: In Radio mode, press and hold the SEL knob for a long time to access the

selection menu: REG ON/REG OFF, PI MUTE/PI SOUND, AF ON/AF

OFF .

Repeatedly pressing the SEL knob to select the item and by using the VOL+/- to

change .

6. PAIR/BND BUT TON

In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2,

Fm3, AM1(MW1), AM2(MW2) .

In BT PHONE mode, for the function of the PAIR button, please refer to the part

of the BT Operation.

Page is loading ...

Pyle PLTS78DUB User manual

Pyle PLTS78DUB User manual

Related papers

Other documents