Premier SCR-4417TVD User manual

Brand: Premier

Model: SCR-4417TVD

Category: Car video systems

Type: User manual

MI C US B IN

MO D

CH 1- 6

SE L

VO L- VO L+

MU RE T

DEAR CUSTOMER

In order to achieve the best performance of your product, please read this

instruction manual carefully before using, and keep it for future reference.

If you need extra support, please write to info@premiermundo.com

SCR-4417TVD

INSTRUCTION MANUAL

Car Audio/Video System

P-1

PREMIER CUSTOMER SERVICE

NOTE

This unit may be submitted to changes in specifications, characteristics and/or operation without prior

notice to the user, in order to continue improving and developing its technology.

Venezuela:

0800 ELECTRIC (353-2874)

Panama: 300-5185

Website

www.premiermundo.com

E-mail:

servicioalcliente@ premiermundo.com

P-2

Avoid Moisture :

To reduce the risk of fire or electric shock, do not expose this equipment to rain or

moisture .

Use Recommended Accessories :

to reduce the risk of fire or electric shock, and annoying

interference, use only the recommended accessories.

POWER SUPPLY :

the appliance should be connected to power supply only of the type described

in the operating instruction or as marked on the appliance .

Protect the disc mechanism :

Avoid inserting any foreign objects into the slot of this player. Failure to observe

this may cause malfunction due to the precise mechanism of this unit .

Important safety

P-3

Content.............................................

Disc Note..........................................

Installation ........................................

Panel angle adjustment ......................

Wiring Connection ............................

Remote Control ................................

Basic Operation................................

TFT Monitor Adjustment ..................

Rear View Camera ...........................

Audio Quality Adjustment..................

Setting Audio Mode ..........................

Setting Time.....................................

Setting background...........................

Reset Factory Settings.......................

Control Panel ...................................

Radio Operation...............................

Listening to radio...............................

Storing stations in memory ................

Automatic Memory Storing &

Program Scanning........................

Media Operation...............................

Basic Operation................................

Selecting Play Mode.........................

On-Screen Display Function..............

Digital Video Special Function............

Multi-subtitle language function.........

Multi-audio language function............

Multi-angle function...........................

Title menu function ............................

Media Setup Menu............................

System Setup....................................

Language Setup................................

Video Setup ......................................

Digital Setup .....................................

AV IN Operation.................................

BT Operation.....................................

TV Operation.....................................

USB Operation..................................

SD/MMC Card Operation....................

MP3/WMA/JPEG/MPEG4 Play.............

Specification.....................................

Troubleshooting ................................

Content

DISC FORMATS

Supported Formats

The following 12 cm discs are supported:

Digital Video (single-side discs

single-double discs)

Video CD

CD Audio

MP3

MPEG4

Discs Which Can Not Be Played

Digital Video-RAM

CDV

CDG

Do not warp discs.

Dirt, dust, scratches and warping disc

will cause malfunction .

Do not place stickers or make

scratches on discs.

A disc should always be kept in its

case when not in use to prevent from

damaging.

Always ensure that discs are clean

and dry before inserting .

Precautions For Disc

Wipe the disc from center

toward the outside edge

Do not touch the underside

of the disc

Label side up

Do not bend

Handling DISC

DISC CLEANING

use a dry soft cloth to wipe the surface .

If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing)

alcohol .

Never use solvents such as benzine,

thinner or conventional record cleaners

as they may mar the surface of the disc.

Preparing new discs with rough

spots

Roughness

Ball- poin t pen

New discs may have some roughness

around the edge . The Digital Video player

may not work properly or the video/sound

reproduction may skip if such discs

are used .

Note: use a ballpoint pen, etc ., To

remove roughness from the edge of

the disc .

P-4

Disc note

NOTES:

1. Choose the mounting location where the unit will not interfere with the normal

driving function of the driver

2. Before finally installing the unit, connect the wiring temporarily and make sure

it is all connected up properly and the unit and the system work properly.

3. Use only the parts included with the unit to ensure proper installation. The use

of unauthorized parts can cause malfunctions.

4. Consult with your nearest dealer if installation requires the drilling of holes or

other modifications of the vehicle.

5. Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

. Avoid installing the unit where it would be subject to high temperature, such

as from direct sunlight, or from hot air, from the heater, or where it would be

subject to dust, dirt or excessive vibration.

7. If installation angle exceeds 30 from horizontal, the unit might not give its

optimum performance.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded

screw holes at the sides of the unit chassis). For details, refer to the following

illustrated installation methods.

P-5

Installation

P-6

Installation diagram

DASH BOARD

METAL MOUNTING

STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

HEX BOLT

MOUNTING BRACKET

NOTE:

Don`t attempt install the set by yourself, it should be installed by

professional installer .

MOUNTING

BRACKET

MOUNTING BOLTS

P-7

Caution:

Do not insert your finger behind the control panel.

When you want to change the viewing angle of the operating unit to play,

you can touch the section on touch screen (or press the button

on the front panel) repeatedly to select the desired angle as follows:

ANGLE 1 - ANGLE 2 - ANGLE 3 - ANGLE 4 - ANGLE 1 .

PANEL ANGLE ADJUSTMENT

Angle 3

Angle 4

Angle 1

Angle 2

WIRING CONNECTION

P-8

Note:

the earth connection cable (parking brake B-) must be connected in order for

pictures to be played back to the monitor. If the cable has not been correctly

connected, the message “PARKING BRAKE” appears on the monitor.

YELLOW

REAR CAMERA INPUT

BROWN

PINK

(B+)12V

REAR CAMERA SWITCH

(B-)PARKING BRAKE

GREY

GREY/BLACK

FRONT

Rch SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

REAR

Lch SPK.

AUTO ANTENNA

BLUE

FUSE

GROUND(B-)

MEMORY BACK-UP(B+)

IGNITION SWITCH(B+)

RED

YELLOW

BLACK

REAR

Rch SPK.

FRONT

Lch SPK.

FUSE

BOX

SUBWOOFER GREY

RCH RED

LCH WHITE

REAR RCA OUTPUT

CABLE

FRONT RCA WHITE L

FRONT RCA RED R

VIDEO OUT YELLOW

FRONT RCA OUTPUT

CABLE

RADIO ANTENNA JACK

TV ANTENNA IN

P-9

Button

Ref #

Function

CLK

Press it briefly to view the clock time .

PAIR/

Press it to us e the BT function , ref er to BT ope rat ion.

STOP

Press once to pause playback. Press PLAY/PAUSE to resume

playback. Please note: if you press STOP twice, playback will

start at the beginning of the disc.

SETUP

Press this button to open the SETUP menu.

MO/ST

(AUDIO)

In Radio mode, press this button to change between Mono and

Stereo reception modes (when a station is weak, sometimes

switching to Mono will improve sound quality). In media Playback

mode, pressing this button opens the AUDIO setup menu for

making changes to the way the soundtrack is reproduced.

SUBTITLE

LOCAL/

DISTANT

In Digital Video Disc Playback mode, pressing this button will allow

you to change the subtitle language on discs which have this as an

option.

In Radio mode, press this button to change the radio reception

sensitivity in stations are near or far.

Redial/

Press it to us e the BT function , ref er to BT ope rat ion .

MENUMENU

SETUP SETUP

ENTERENTER

55 66

VOLVOL

SELSEL

A/PSA/PS

MUTEMUTE

STOPSTOP

MO/STMO/ST

MODEMODE

CLKCLK

PLAY/PAUSEPLAY/PAUSE

EQEQ

ANGLEANG LE

BANDBAND

VOLVOL

OSDOSD

TITLE/PBCTITLE/PBC

LO/DXLO/DX

GOTOGO TO

10+10+

TOP

INT

RDM

REDIAL

PAIR

LOUD

RPT

ZOOMZOOM

Remote Control

P-10

Button

Ref #

Function

GOTO

Press it button to begin playback at a moment in the program you designate. Use

number buttons to enter the data that is needed. In BT menu, it serves as the

asterisk button on your mobile handset.

SEL

Press these buttons to skip ahead or back one track.

VOL+/-

Use these controls to adjust the volume level.

/ / /

Press this button briefly to display the root level directory of a

Digital Video disc. Press and hold this button to turn on or off the

SUBWOOFER output.

SubWoofer

( )

BAND

(OSD)

In Radio mode, press this button repeatedly to switch between

the five radio bands: FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2).

In Disc Playback modes, Press this button to see information

about the disc currently in play.

/MOD

Press this button to turn the unit ON , press and hold to turn the

unit OFF. Press it briefly to select a desired work source .

PLAY/

PAUSE

In Disc Playback mode, press to pause playback. Press again to

start where playback stopped.

MUTE

Press this button to turn off the audio. Press again to restore the

sound to its prior volume level.

TITLE/

PBC(A/PS)

When playing a Digital Video, pressing this button will open the TITLE

menu which is recorded on the media. When playing a VCD disc,

press this button to create a PBC (Playback Control) menu for the

disc to assist in making playback selections. In Radio mode,

press and hold this button to start the Auto-Program mode, during

which the tuner will scan for all strong stations and assign them

to the radio preset buttons.

Press this button to Open/Close the operate monitor .Long press

it to adjust the angle of monitor Upward/Downward.

ZOOM/

ANGLE

For Digital Video discs which have alternate viewing angles encoded,

when you see the "angle mark" symbol advising you that these

angles are available, longer press this button to see them.

Shortly press it button to increase the picture in size .

EQ/LOUD

Press repeatedly to cycle through the different equalizer curve

presets you may wish to use for enhanced listening. Press longer

to switch the LOUDNESS function ON and OFF .

In Disc Playback mode, press for fast forward playback.

In TV mode, Press it to search TV channel automatically.

Press to navigate the various menus present in the product.

In TV mode, press / to fine tune. Press the / to select

channel upward and downward.

Briefly press this button repeatedly to switch between BASS,TREBLE,BALANCE,

FADE,COLOR,BRIGHT,CONTRAST, TINT and VOLUME; Long press this button to

switch BT, then briefly press this button repeatedly to switch between LOUD,SWF,

EQ,DX/LOCAL(in radio mode),STEREO/MONO(in radio mode),TIME 24H/12H,

CLOCK,BUZZ,EUR/USA FREQ,ANIMA,BG and TV SYSTEM;After switching a

desired item above, press VOL+ or VOL- button to set.

P-11

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

Button

Ref #

Function

0-9

10+/

1-6

Six numbered preset buttons store and recall stations for each band

This button is used with the other number buttons for use with

two-digit number entries. In BT menu, it serves as the hash

button on your mobile handset.

ENTER

This button is used to confirm selections and settings within many

of the menus in the OSD system.

Use to input numerical values during programming, with the GOTO

button, or to directly select a track to play .

In TV mode, press it to ADD and DELETE channel .

In DISC mode, press it to reverse rapidly

SKIP

P-12

TFT Monitor Adjustment

In media mode , touch screen of “ ”

range to enter the main menu . Touch

“SETUP ” ICON to enter the setting menu,

the message display in the screen:

REAR VIEW CAMERA

When connecting the rear view camera.

the mirror image of the rear view through

the rear view camera is automatically

displayed on the monitor when you

change the gear to the back position.

(Note : additional the monitor can not

display image .)

AUDIO QUALITY ADJUSTMENT

In any modes, touch the screen of the

“ ” ICON to enter the home menu,

touch the “ SETUP ” ICON to enter the

Setting mode, the message will display

in the screen :

Touch the “ SYSTEM ” section on the

setting menu, touch the “ / ” ranges

to select the adjustment item, touch the

“ / ” ranges to adjust the selectment

item , It`s depend on your habit to setup

the data .

BT ON/OFF

Touch to switch the BT

function ON and OFF .

SETTING ANIMATION

In RADIO mode, you can change the

playing time of animation among of

“OFF,10S, 30S, 1M, 1.5M, 2M, 3M and 4M”.

Note:

Please set the playing time of the

animation to “ 10S ” for the first, when

you turn the unit on .

TINT: 0 to 32

Adjust the tint if the human skin color is

unnatural.

-Adjustable when “NTSC “ is selected for

“NTSC/PAL “ .

ADJUSTABLE ITEMS:

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker.

CONTRAST: 0 to 32

Adjust the contrast of the bright and dark

portion.

BRIGHTNESS: 0 to 32

Adjust if the picture is too bright or

too dark.

DUB TV SYSTEM(for tv version only)

Change the TV standard among of the

“NTSC,PAL/BG, PAL/DK, PAL/I, PAL/M,

PAL/N, SECAM/BG, SECAM/DK”

SETTING WALLPAPER

in wallpaper mode, you can select the

among of “AUTO, GREEN, YELLOW, RED,

LIGHT BLUE, BLUE, PINK ” .

When you select the “AUTO” item, the

player will change the background

automatically .

TREBLE

BASS

+06

BRIGHT

CONTRAST

COLOR

P-13

ADJUSTABLE ITEMS:

TREBLE: -7 to +7

Adjust treble level .

BALANCE: R 0-10 to L 0-10 .

Adjust sound balance between left

and right speakers .

BUZZER SET

Touch to switch the BUZZER BEEP

function ON and OFF .

FADE: F 0-10 to R 0-10

Adjust sound balance between front and

rear speakers .

BASS: -7 to +7

Adjust bass level .

Setting Audio Mode

In any modes, touch the “EQ” range on

the touch screen (or press the EQ button

on remote control) to select one of

the preset sound modes: ROCK/POP/

JAZZ/CLASSIC/USER .

The information will display in the

monitor as follow :

POP

USER

ROCK

CLASSIC

JAZZ

It`s depend on your habit to select the

Audio mode .

Hour adjustment: 0-23

ADJUSTABLE ITEMS:

Minutes adjustment: 0-59

Time format selectment : 24 H/12H

Touch the “ SOUND ” section on the

setting menu, touch the “ / ” ranges

to select the adjustment item, touch the

“ / ” ranges to adjust the selectment

item , It`s depend on your habit to select

the Audio mode .

In SETUP mode, touch the “TIME”

range to select the time mode .

SETTING TIME

Touch the “ TIME ” section on the setting

menu, touch the “ / ” ranges to

select the adjustment item, touch the

“ / ” ranges to adjust the selectment

item , then touch “ ” icon to confirm .

It`s depend on your need to setup

the data .

In SETUP mode, touch the “SYSTEM”

range to select the wallpaper mode .

SETTING BACKGROUND

Touch “ SYSTEM” section on the setting

menu, touch the “ / ” ranges to

select the adjustment item, touch the

“ / ” ranges to adjust the selectment

item , then touch “ ” icon to confirm .

It`s depend on your habit to select the

desired background .

MINUTE

24H/12H

HOUR

11:36AM

WALLPAPER

ANIMATION

AUTO

P-14

in wallpaper mode, you can select the

among of “AUTO, GREEN, YELLOW, RED,

LIGHT BLUE, BLUE, PINK ” .

When you select the “AUTO” item, the

player will change the background

automatically .

Reset Factory Settings

RESET button is placed on the housing

and must be activated with either a

ballpoint pen or thin metal object.

The RESET button is to be activated for

the following reasons:

A. Initial installation of the unit when

all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

NOTE:

If RESET is selected, all memory data

will deleted, please re-adjust .

RET

RESET

P-15

Control Panel

Unit Keys :

3 (POWER On/Off )/MODE BUTTON

In power off mode, press this button to switch the unit on.

In power on mode, briefly press this button to switch between RADIO, DISC

(after inserting a disc), USB(after inserting a USB), CARD(after inserting a

card), TV, AV IN and BT MUSIC.

In power on mode, long press this button to switch the unit off.

Front View

Right side View

MI C USB IN

MO D

CH 1- 6

SE L

VO L- VO L+

MU RE T

1 2 3 4 5 6 7 8 9 10 11 12 13

AUX I N

1 MICROPHONE

2 USB PORT

4 /CH 1-6 (RADIO PRESET)BUTTON

In media mode, use this button to pause or resume playback.

In radio mode, use this button to preset or listen to a memory station

1) To preset a station in a memory bank with CH1-6 button, first select a

desired band; then press CH1-6 button to select a desired memory bank;

and then search for a desired station; finally long press CH1-6 button to

store the station in the memory bank.

P-16

11 (EJECT) BUTTON

To insert a disc into the disc slot, touch this button to slide down the control

panel, then insert a disc with label surface upward, and then the control panel

will slide up to attach to chassis again.

To eject the disc in the disc slot, touch this button to slide down the control

panel and draw out the disc, then you can remove the disc.

5 SEL BUTTON

Briefly press SEL button repeatedly to switch between BASS,TRE,BAL,FADE,

COLOR,BRIGHT,CONTR,TINT and VOL; Long press SEL button to switch BT,

then briefly press this button repeatedly to switch between LOUD, SWF, EQ,

DX/LOCAL(in radio mdo),STEREO/MONO(in radio mode),TIME 24H/12H,

CLOCK,BUZZ,EUR/USA FREQ, ANIM,BG and TV SYSTEM; After switching

a desired item above, press VOL+ or VOL- button to set.

12 RESET BUTTON

Press this button to return to factory settings .

7 IR SENSOR

6/8 VOL-/VOL+ BUTTON

In normal mode, this button is used to increase or decrease the volume.

It is also used as an UP/DOWN button when audio or video settings are being

accessed using the SELECT button.

9 MU (MUTE)

In any mode, press to mute or resume the sound .

10 ANGLE (Screen position)

Press to change the angle of the control panel/monitor.

13 AV IN JACK

2) To listen to a preset station with CH1-6 button, first switch on a desired

band, then continuously press CH1-6 button highlight and listen to it.

P-17

2 3

Selecting The Frequency Band

Touch the screen of “ BAND ” section

repeatedly to select the band , the

message will show in turn :

Listening to radio

Touch the RADIO ICON in home menu

to enter the RADIO mode:

To tune in strong-singnal FM

Station only (LO/DX function)

touch the screen of “ ” ICON to enter

the home menu, then touch “ ”

icon to enter the setting menu, the

message will display as below :

Press ST/MO button on the remote

control to select the MONO or STEREO

mode . (When Stereo mode is activated,

the ST symbol will appear . )

When an FM stereo broadcast is

hard to receive

Automatic Search

During Radio mode, touch and hold

(more than 2’s ) the screen of “ / ”

section to start search for a radio

station automatically .

Start Searching For a Station

During Radio mode, briefly touch the

screen of “ ” section to increase

frequency by one step of channel

spacing .

Briefly touch the “ ” section to

decrease frequency by one step of

channel spacing .

Manual Search

In any modes, touch the “ ” ICON on

the touch screen to enter the main menu,

the information will display :

The touch buttons on the lower of the

touch monitor:

1. Power button

in any modes, touch the “ ” ICON

to switch the unit off . The monitor

will draw in automatically .

2. Button

touch this range to adjust the angle of

monitor downward until your desired

angle .

3. Button

touch this range to eject or insert the

disc .

RADIO operation

SETUP

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

87.5087.50

106.10106. 10

90.1090.10

107.00107. 00

88.5088.50

98.1098.10

87.5087.50

MHZMHZ

FM1FM1

P-18

In Radio Mode, touch and keep (for more

than 2 ’ S) the screen of “ APS ” range to

active automatic station storage.

The radio searches within the current

frequency band, e.g. FM1, for the stron-

ger signal level until the search cycle

has finished . The six strongest stations

are then allocated to the corresponding

storage locations .

Then the station of the first storage

location is set .

Automatic Memory Storing &

Program Scanning

Automatic Preset Setup

Scan Function

In Radio mode, briefly touch the “APS”

section on the touch screen , the radio

briefly plays all the preset stations of the

frequency band .

Storing Stations in Memory

Setting Memory

With this system, a total of 30 stations

can be stored in the memory of six

buttons. Each band stores up to six

preset stations. The stations might be

FM1, FM2, FM3, AM1(MW1), and

AM2(MW2) band.

The operation is as below :

- Store in Memory

>Select the frequency band

>Select the station

>Keep the desired memory key pressed

in until the station is heard again after

a brief interruption .

- Retrieve a preset station

Touch the 1-6 ranges briefly to retrieve

a station which had been stored in the

memory in advance the chose number

is shown on display .

Touch the “ Sound ” section on the

setting menu, touch the “ / ” ranges

to select the “ Radio L/D ” item, touch the

“ / ” ranges to choose between the

LOC and DX mode of Local and Long-

distance traffic news .

RADIO LOC/DX

87.5087.50

106.10106.10

90.1090.10

107.00107.00

88.5088.50

98.1098.10

87.5087.50

MHZMHZ

FM1FM1

87.5087.50

106.10106.10

90.1090.10

107.00107.00

88.5088.50

98.1098.10

87.5087.50

MHZMHZ

FM1FM1

P-19

In any modes, repeatedly press MOD

button on front panel to enter the disc

play mode .

The message will display as below :

(When Parking Brake supplied .)

ANGLEANGLE

Media Operation

To enter the main menu

Mute function

Intro Function

Random Function

Repeat Function

To increase the volume level

To decrease the volume level

To search the disc with numbers

Play/Pause the disc

Stop

To search fast backward

To search fast forward

Next menu

To skip the previous track

To skip the next track

To select the viewing angle

To show/hide the Subtitle

(depending on the media)

To change the AUDIO setting

(depending on the media)

ZOOM IN and OUT

To display the SETUP menu

Previous menu

On screen- display

To show / hide the clock

Loudness Function

Subwoofer Function

Redialing

Registering devices with one

another. In BT mode, touch

to call up the BT menu .

To select the Equalizer mode

In Digital Video mode, touch to

display the root menu. In VCD

mode, touch to switch the PBC

ON and PBC OFF.

MENUMENU

PBCPBC

Page is loading ...

Premier SCR-4417TVD User manual

Brand: Premier

Model: SCR-4417TVD

Category: Car video systems

Type: User manual

Download PDF

report

Premier SCR-4417TVD User manual

Premier SCR-4417TVD User manual

Related papers

Other documents