AVFI PM-HD-EXP Installation guide

Brand: AVFI

Model: PM-HD-EXP

Type: Installation guide

6mm Hex Key

(1)

M8 X20 LOCKNUT

(2) (2)

Bracket

(1)

M3 x 8mm

(2)

Remove the M3

screw located here

and here on Express

and Express 200.

Leave in place on Lifesize 220

Slide codec into bracket

until screw holes on bottom

are lined up.

M8 x 20mm + M8 Nut

(2) (2)

M3 x 8mm

(2)

AUDIO VISUAL FURNITURE INTERNATIONAL

190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com

Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local: 905-751-1459

Note:

If you cannot understand these instructions or are concerned about safety of the installation

Contact a qualified contractor or contact AVFI at 1-877-834-3876.

Confirm all hardware is included before you begin assembly.

PM-HD-EXP

Mounting Instructions

Thank you for purchasing AVFI's LifeSize® Express™ bracket.

This product was designed for mounting a LifeSize® Express™

Codec

to AVFI PM-S-FL, PM-XFL-D & PM-XFL-S display stands.

Supplied Parts:

Hardware Bag Contents:

Page 1

of 1

Hardware Bag

(1)



Using a screwdriver

Insert the 2 included screws

M3 x 8mm.

(1 screw if Express 220)

You're Done.!

Attach the bracket in the desired position and

location using the 2 nuts and bolts provided.

Hand tighten the nut till its snug.

Place codec to confirm clearance before tightening

with hex key.

1

AVFI PM-HD-EXP Installation guide

Brand: AVFI

Model: PM-HD-EXP

Type: Installation guide

Download PDF

Related papers

Other documents