Hitachi um 16vst Handling Instructions Manual

Brand: Hitachi

Model: um 16vst

Category: Power tools

Type: Handling Instructions Manual

This manual is also suitable for

um 12vst

Hitachi UM 16VST is a powerful mixer designed for mixing pulverized building materials, solvent-free paints, varnishes, and similar substances. It features variable speed control with two settings for customized mixing tasks. The 160 mm stirrer paddle ensures efficient mixing, while the ergonomic design with a trigger switch and stopper allows for continuous operation. Safety features include a power switch to prevent accidental startups and a sturdy construction for durability.

UM 16VST

•

UM 12VST

Handling instructions

Read through carefully and understand these instructions before use.

English ﺔﻴﺑﺮﻌﻟا

Brush cap

ةﺎﺷﺮﻔﻟا ءﺎﻄﻏ

Speed control dial

ﺔﻋﴪﻟا ﰲ ﻢﻜﺤﺘﻟا حﺎﺘﻔﻣ

Stopper

داﺪﺳ

Trigger

دﺎﻧﺰﻟا

Stirrer paddle

ﺐﻴﻠﻘﺘﻟا ةادأ فاﺬﻘﻣ

Wrench

ﻂﺑر حﺎﺘﻔﻣ

Spindle

نارود دﻮﻤﻋ

Gear shift dial

ﻲﻔﻠﺨﻟا ﻞﻳﻮﺤﺘﻟا صﺮﻗ

English

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ -position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your ﬁ nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀ ect the

power tool's operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diﬀ erent from

those intended could result in a hazardous situation.

English

5) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach

of children and inﬁ rm persons.

PRECAUTIONS ON USING THE MACHINE

1. Do not use the power tool for explosive materials

(e. g., easily inﬂ ammable solvents).

Power tools produce sparks which could ignite

developing vapours.

2. In case the power tool should fall into the material

to be stirred, pull the plug immediately and have the

power tool checked by an after-sales service agent.

Material that has penetrated the power tool can cause

damage and lead to an electric shock.

3. When working with the machine, always hold it

ﬁ rmly with both hands and provide for a secure

stance.

The power tool is guided more secure with both hands.

4. Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

5. Take protective measures when dust can develop

during working that is harmful to one's health,

combustible or explosive.

Example: Some dusts are regarded as carcinogenic.

Wear a dust mask and work with dust/chip extraction

when connectable.

6. Always wait until the machine has come to a

complete stop before placing it down.

The tool insert can jam and lead to loss of control over

the power tool.

7. Never use the machine with a damaged cable. Do

not touch the damaged cable and pull the mains

plug when the cable is damaged while working.

Damaged cables increase the risk of an electric shock.

8. When operating a mixer with wet material avoid

splashes up to the motor part.

9. Connect machines that are used in the open via a

residual current device (RCD).

SPECIFICATIONS

Model UM16VST UM12VST

Voltage (by areas)* 230V

Power input 1500 W* 1100 W*

Speed change 1212

No-load speed 150 – 300 /min 300 – 650 /min 150 – 300 /min 300 – 650 / min

Stirrer paddle 160 mm 120 mm

Weight (without cord) 5.6 kg 5.4 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Stirrer paddle 160 mm (UM16VST) or 120 mm

(UM12VST ) ...................................................................1

(2) Wrench .........................................................................2

(3) 1 pair of spare carbon brush ........................................1

Standard accessories are subject to change without notice.

APPLICATIONS

Mixing pulverised building materials such as mortar,

plaster, adhesives, as well as solvent-free paint,

varnish and similar substances.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements speciﬁ ed on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extension cord

When the work area is removed from the power source,

use an extension cord of suﬃ cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Mounting and dismounting of the stirrer paddle

(Fig. 2)

CAUTION

To avoid serious accident, ensure the switch is in the

OFF position, and the power source is disconnected.

(1) Screw the stirrer paddle onto the spindle. Hold the

spindle in place with wrench and turn the stirrer paddle

with another wrench in the clockwise direction (viewed

from the front side). Tighten securely.

(2) The stirrer paddle is disassembled in reverse order.

5. High-speed/Low-speed changeover

Prior to changing speed, ensure that the switch is in the

OFF position, and the machine has come to a complete

stop.

To change speed, rotate the gear shift dial as indicated

by the arrow in Fig. 3. The numeral “1” engraved on

the machine body denotes low speed, the numeral “2”

denotes high speed.

If it is hard to turn the gear shift dial, turn the spindle

slightly in either direction and then turn the gear shift

dial again.

English

HOW TO USE

1. Switch operation (Fig. 4)

○ When the trigger is depressed, the tool rotates. When

the trigger is released, the tool stops.

○ Pulling the trigger and pushing the stopper, it keeps

the switched-on condition which is convenient for

continuous running. When switching oﬀ , the stopper

can be disconnected by pulling the trigger again.

2. Adjusting the speed

The desired rotation speed can be pre-selected with

the speed control dial. (Fig. 5)

MAINTENANCE AND INSPECTION

1. Storage and cleaning

When a mixer is not in use store it in dry locations the

motor part upwards.

When cleaning a mixer avoid entrance of any water or

liquid to the motor part.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool. Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

4. Inspecting the carbon brushes

The motor employs carbon brushes which are

consumable parts. Since an excessively worn carbon

brush can result in motor trouble, replace the carbon

brushes with new ones having the same carbon brush

No.. In addition, always keep carbon brushes clean and

ensue that they slide freely within the brush holders.

CAUTION

When replacing the new carbon brushes, always use

genuine Hitachi carbon brushes with the number

speciﬁ ed in the drawing.

5. Replacing carbon brushes

Disassemble the brush caps with a slotted-head

screwdriver. The carbon brushes can then be easily

removed.

6. Service parts list

CAUTION

Repair, modiﬁ cation and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Par ts List will be helpful if presented with the tool to

the Hitachi Authorized Service Center when requesting

repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

MODIFICATION

Hitachi Power Tools are constantly being improved

and modiﬁ ed to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without prior

notice.

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

ﺔﻴﺑﺮﻌﻟا

ﻡﺍﺩﺧﺗﺳﻻﺍ ﺔﻳﻔﻳﻛ

(4 ﻝﻛﺷﻟﺍ) ﺡﺎﺗﻔﻣﻟﺍ ﻝﻳﻐﺷﺗ 1

،ﺡﺍﺩﻘﻣﻟﺍ ﺭﻳﺭﺣﺗ ﺩﻧﻋ .ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻑﻗﻭﺗﺗ ،ﺡﺍﺩﻘﻣﻟﺍ ﻁﻐﺿ ﺩﻧﻋ ○

.ﺓﺍﺩﻷﺍ ﻑﻗﻭﺗﺗ

ﻲﻓ ﺯﺎﻬﺟﻟﺍ ءﺎﻘﺑﺇ ﻰﻠﻋ ﻙﻟﺫ ﻝﻣﻌﻳ ،ﻑﺎﻘﻳﻹﺍ ﺓﺍﺩﺃ ﻊﻓﺩﻭ ﺡﺍﺩﻘﻣﻟﺍ ﺏﺣﺳ ○

ﻑﺎﻘﻳﺇ ﺩﻧﻋ .ﻝﺻﺍﻭﺗﻣﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﻊﻣ ﺏﺳﺎﻧﺗﻳ ﺍﺫﻫﻭ ﻝﻳﻐﺷﺗﻟﺍ ﻊﺿﻭ

.ﻯﺭﺧﺃ ﺓﺭﻣ ﺡﺍﺩﻘﻣﻟﺍ ﺏﺣﺳﺑ ﻑﺎﻘﻳﻹﺍ ﺡﺎﺗﻔﻣ ﻝﺻﻓ ﻥﻛﻣﻳ ،ﻝﻳﻐﺷﺗﻟﺍ

ﺔﻋﺭﺳﻟﺍ ﻁﺑﺿ

ﻲﻓ ﻡﻛﺣﺗﻟﺍ ﺹﺭﻗ ﻊﻣ ﺔﺑﻭﻏﺭﻣﻟﺍ ﻥﺍﺭﻭﺩﻟﺍ ﺔﻋﺭﺳﻟ ﻕﺑﺳﻣﻟﺍ ﺩﻳﺩﺣﺗﻟﺍ ﻡﺗﻳ ﺩﻗ

(5 ﻝﻛﺷﻟﺍ) .ﺔﻋﺭﺳﻟﺍ

ﺹﺣﻔﻟﺍﻭ ﺔﻧﺎﻳﺻﻟﺍ

ﻑﻳﻅﻧﺗﻟﺍﻭ ﻥﻳﺯﺧﺗﻟﺍ 1

ﺔﻓﺎﺟ ﻊﻗﺍﻭﻣ ﻲﻓ ﻪﻧﻳﺯﺧﺗﺑ ﻡﻘﻓ ﻡﺍﺩﺧﺗﺳﻻﺍ ﺩﻳﻗ ﻁﻼﺧﻟﺍ ﻥﻭﻛﻳ ﻻ ﺎﻣﺩﻧﻋ

.ﻰﻠﻋﻷ ﺎ

ﻬﺟﺗﻣ ﻙﺭﺣﻣﻟﺍ ءﺯﺟ ﻥﻭﻛﻳ ﺙﻳﺣﺑ

.ﻙﺭﺣﻣﻟﺍ ءﺯﺟﻟ ﻝﺋﺍﻭﺳ ﻭﺃ ﻩﺎﻳﻣ ﻱﺃ ﻝﻭﺧﺩ ﺏﻧﺟﺗ ﻁﻼﺧﻟﺍ ﻑﻳﻅﻧﺗ ﺩﻧﻋ

ﺕﻳﺑﺛﺗﻟﺍ ﺭﻳﻣﺎﺳﻣ ﺹﺣﻓ

ﺎﻬﻁﺑﺭ ﻡﺎﻛﺣﺇ ﻥﻣ ﺩﻛﺄﺗﻟﺍﻭ ﺕﻳﺑﺛﺗﻟﺍ ﺭﻳﻣﺎﺳﻣ ﺔﻓﺎﻛﻟ ﻱﺭﻭﺩﻟﺍ ﺹﺣﻔﻟﺎﺑ ﻡﻗ

.ﺭﻭﻔﻟﺍ ﻰﻠﻋ ﺎﻬﻁﺑﺭ ﻡﺎﻛﺣﺈﺑ ﻡﻗ ،ﺭﻳﻣﺎﺳﻣ ﺔﻳﺃ ﻙﻓ ﺔﻟﺎﺣ ﻲﻓ .ﺢﻳﺣﺻ ﻝﻛﺷﺑ

.ﺭﻁﺎﺧﻣ ﻰﻟﺇ ﻙﻟﺫﺑ ﻡﺎﻳﻘﻟﺍ ﻲﻓ ﻝﺷﻔﻟﺍ ﺽﺭﻌﻳ ﺩﻘﻓ

ﻙﺭﺣﻣﻟﺍ ﺔﻧﺎﻳﺻ

.ﺔﻗﺎﻁﻟﺍ ﺓﺍﺩﺃ ﻥﻣ "ﻁﺳﻭﻷﺍ ءﺯﺟﻟﺍ" ﻭﻫ ﻙﺭﺣﻣﻟﺍ ﺓﺩﺣﻭ ﻑﻠﻣ

.ءﺎﻣﻟﺍ ﻭﺃ ﺕﻳﺯﻟﺍ ﺔﻁﺳﺍﻭﺑ ﻪﻠﻠﺑ ﻭﺃ/ﻭ ﻑﻠﻣﻟﺍ ﻑﻠﺗ ﻡﺩﻋ ﻥﻣ ﺭﺍﺭﻣﺗﺳﺎﺑ ﺩﻛﺄﺗ

ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﺹﺣﻓ

.ﺓﺭﻣﻌﻣ ﺭﻳﻏ ءﺍﺯﺟﻷﺍ ﻥﻣ ﻲﻫﻭ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻙﺭﺣﻣﻟﺍ ﻡﺩﺧﺗﺳﻳ

ﻲﻓ ﻝﻁﻋ ﻰﻟﺇ ﻱﺩﺅﺗ ﺩﻗ ﺓﺩﺷﺑ ﺔﻠﻛﺂﺗﻣﻟﺍ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻥﺍ ﺙﻳﺣﻭ

ﻡﻗﺭ ﺱﻔﻧ ﺎﻬﻟ ﺓﺩﻳﺩﺟ ﻯﺭﺧﺄﺑ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻝﺍﺩﺑﺗﺳﺎﺑ ﻡﻘﻓ ،ﻙﺭﺣﻣﻟﺍ

ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻑﻳﻅﻧﺗﺑ ﻡﻗ ،ﻙﻟﺫ ﻰﻟﺇ ﺔﻓﺎﺿﻹﺎﺑ .ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ

.ﺓﺎﺷﺭﻔﻟﺍ ﺽﺑﺎﻘﻣ ﻝﺧﺍﺩ ﺔﺳﻼﺳﺑ ﺎﻬﻗﻻﺯﻧﺍ ﻥﻣ ﺩﻛﺄﺗﻟﺍﻭ ﺭﺍﺭﻣﺗﺳﺎﺑ

ﺭــﻳﺫـﺣـﺗ

Hitachi ﺓﺎﺷﺭﻓ ﺎ

ﻣﺋﺍﺩ ﻡﺩﺧﺗﺳﺍ ،ﺓﺩﻳﺩﺟﻟﺍ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻝﺍﺩﺑﺗﺳﺍ ﺩﻧﻋ

.ﻡﺳﺭﻟﺍ ﻲﻓ ﺩﺩﺣﻣﻟﺍ ﻡﻗﺭﻟﺎﺑ ﺓﺩﻣﺗﻌﻣﻟﺍ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ

ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺓﺎﺷﺭﻔﻟﺍ ﻝﺍﺩﺑﺗﺳﺍ

ﺩﻌﺑﻭ .ﺕﺎﺣﺗﻓ ﻭﺫ ﺱﺃﺭﺑ ﺭﻳﻐﺻ ﻙﻔﻣ ﻡﺍﺩﺧﺗﺳﺎﺑ ﺓﺎﺷﺭﻔﻟﺍ ﺔﻳﻁﻏﺃ ﻙﻔﺑ ﻡﻗ

.ﺔﻟﻭﻬﺳﺑ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺵﺭﻔﻟﺍ ﻉﺯﻧ ﻥﻛﻣﻳ ﻙﻟﺫ

ﺔﻣﺩﺧﻟﺍ ءﺍﺯﺟﺃ ﺔﻣﺋﺎﻗ

ﻪﻳﺑﻧﺗ

ﻥﻣ Hitachi ﺕﺍﻭﺩﻷ ﺹﺣﻔﻟﺍﻭ ،ﻝﻳﺩﻌﺗﻟﺍﻭ ،ﺡﻼﺻﻹﺍ ﻝﺎﻣﻋﺃ ﺫﻳﻔﻧﺗ ﺏﺟﻳ

.ﺩﻣﺗﻌﻣﻟﺍ ﺔﻣﺩﺧﻟﺍ ﺯﻛﺭﻣ ﻝﺑﻗ

Hitachi ﺔﻣﺩﺧ ﺯﻛﺭﻣﻟ ﺓﺍﺩﻷﺍ ﻊﻣ ﺎﻬﻣﻳﺩﻘﺗ ﺩﻧﻋ ﺓﺩﻳﻔﻣ ﻩﺫﻫ ءﺍﺯﺟﻷﺍ ﺔﻣﺋﺎﻗ

.ﺔﻧﺎﻳﺻﻟﺍ ﻝﺎﻣﻋﺃ ﻥﻣ ﺎﻫﺭﻳﻏ ﻭﺃ ﺡﻼﺻﻹﺍ ﺏﻠﻁ ﺩﻧﻋ ﺩﻣﺗﻌﻣ

ﺕﺎﻣﻳﻠﻌﺗ ﻉﺎﺑﺗﺍ ﺏﺟﻳ ،ﺎﻬﺗﻧﺎﻳﺻ ﻭﺃ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﺔﻟﺎﺣ ﻲﻓ

.ﺔﻟﻭﺩ ﻝﻛﺑ ﺔﺻﺎﺧﻟﺍ ﺭﻳﻳﺎﻌﻣﻟﺍﻭ ﻥﺎﻣﻷﺍ

ﺕﻼﻳﺩﻌﺗﻟﺍ

ﺕﺎﻳﻧﻘﺗﻟﺍ ﺙﺩﺣﻷ ﺎ

ﻌﺑﺗ ﺎﻬﻠﻳﺩﻌﺗﻭ ﺭﺍﺭﻣﺗﺳﺎﺑ

Hitachi ﺕﺍﻭﺩﺃ ﻥﻳﺳﺣﺗ ﻡﺗﻳ

.ﺔﻣﺩﻘﺗﻣﻟﺍ

(ﻡﻳﻣﺻﺗﻟﺍ ﻭﺃ/ﻭ ﺯﻭﻣﺭﻟﺍ ﻡﺎﻗﺭﺃ ﻝﺛﻣ) ءﺍﺯﺟﻷﺍ ﺽﻌﺑ ﺭﻳﻳﻐﺗ ﻡﺗﻳ ﺩﻗ ،ﻙﻟﺫﻟﻭ

.ﻕﺑﺳﻣ ﻡﻼﻋﺇ ﻥﻭﺩ

ﺔﻅﺣﻼﻣ

ﺕﺎﻔﺻﺍﻭﻣﻟﺍ ﺭﻳﻐﺗﺗ ،ﺭﻣﺗﺳﻣﻟﺍ ﺭﻳﻭﻁﺗﻟﺍﻭ ﺙﺣﺑﻠﻟ

HITACHI

ﺞﻣﺎﻧﺭﺑﻟ ﺎ

ﻌﺑﺗ

.ﻕﺑﺳﻣ ﻡﻼﻋﺇ ﻥﻭﺩ ﺎﻧﻫ ﺓﺭﻭﻛﺫﻣﻟﺍ

ﺔﻴﺑﺮﻌﻟا

ﺔﻣﺩﺧﻟﺍ (

ﻁﻘﻓﻭ ﻥﻳﺻﺻﺧﺗﻣﻟﺍ ﻝﺑﻗ ﻥﻣ ﻁﻘﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﻙﺗﺩﻋ ﺢﻳﻠﺻﺗﺑ ﺢﻣﺳﺍ (ﺃ

. ﻁﻘﻓ ﺔﻳﻠﺻﻷﺍ ﺭﺎﻳﻐﻟﺍ ﻊﻁﻗ ﻝﺎﻣﻌﺗﺳﺈﺑ

.ﺯﺎﻬﺟﻟﺍ ﻥﺎﻣﺃ ﻰﻠﻋ ﺔﻅﻓﺎﺣﻣﻟﺍ ﻙﻟﺫ ﻥﻣﺅﻳ

ﺕﺎﻁﺎﻳﺗﺣﻻﺍ

.ﻥﺳﻟﺍ ﺭﺎﺑﻛﻭ ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ ﻥﻋ

ﺍﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻊﺿﻭ ﻰﺟﺭﻳ

ﻥﻋ ﺓﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﺏﺟﻳ ﻡﺍﺩﺧﺗﺳﻻﺍ ﻡﺩﻋ ﺔﻟﺎﺣ ﻲﻓ

.ﻥﺳﻟﺍ ﺭﺎﺑﻛﻭ ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ

ﺯﺎﻬﺟﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ ﺔﻣﺯﻼﻟﺍ ﺕﺎﻁﺎﻳﺗﺣﻻﺍ

.ﺭﺎﺟﻔﻧﻼﻟ ﺔﻠﺑﺎﻗ ﺩﺍﻭﻣ ﻥﻣ ﺏﺭﻘﻟﺎﺑ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ 1

.(ﻝﺎﻌﺗﺷﻼﻟ ﺔﻠﺑﺎﻗ ﺭﻳﻏ ﺕﺎﺑﻳﺫﻣﻟﺍ ،ﻝﺎﺛﻣﻟﺍ ﻝﻳﺑﺳ ﻰﻠﻋ)

.ﺓﺩﻋﺎﺻﺗﻣﻟﺍ ﺓﺭﺧﺑﻷﺍ ﻝﻌﺷﻳ ﺩﻗ ﻱﺫﻟﺍﻭ ﺭﺭﺷﻟﺍ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺞﺗﻧﺗ

ﺩﺍﺭﻣﻟﺍ ﺩﺍﻭﻣﻟﺍ ﻝﺧﺍﺩ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻁﻘﺳﺗ ﻥﺃ ﻱﺭﻭﺭﺿﻟﺍ ﻥﻣ ﻥﺎﻛ ﺍﺫﺇ

ﻝﻳﻛﻭﺑ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﺹﺣﻓﺍﻭ ﻝﺎﺣﻟﺍ ﻲﻓ ﺱﺑﺎﻘﻟﺍ ﺏﺣﺳﺍ ،ﺎﻬﺟﺯﻣ

.ﻊﻳﺑﻟﺍ ﺩﻌﺑ ﺎﻣ ﺔﻣﺩﺧ

ﻱﺩﺅﺗ ﺩﻗﻭ ﺎﻬﻔﻠﺗ ﻲﻓ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﺕﻗﺭﺗﺧﺍ ﻲﺗﻟﺍ ﺓﺩﺎﻣﻟﺍ ﺏﺑﺳﺗﺗ ﻥﺃ ﻥﻛﻣﻳ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻ ﻉﻭﻗﻭ ﻰﻟﺇ

ﻊﺿﻭ ﺭﻳﻓﻭﺗﺑ ﻡﻗﻭ ﻥﻳﺩﻳﻟﺍ ﺎﺗﻠﻛﺑ ﺕﺎﺑﺛﺑ ﻪﻛﺳﻣﺍ ،ﺯﺎﻬﺟﻟﺍ ﻊﻣ ﻝﻣﻌﻟﺍ ﺩﻧﻋ

.ﻥﻣﺁ

.ﻥﻳﺩﻳﻟﺍ ﺎﺗﻠﻛﺑ ﺎﻬﺑ ﻙﺎﺳﻣﻹﺍ ﺩﻧﻋ ﻥﻣﺁ ﻊﺿﻭ ﻲﻓ ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻥﻭﻛﺗ

.ﺱ

ﻭ

ﺗﺳ

ﺑ

ﺳﻷﺍ ﻰﻠﻋ ﻱﻭﺗﺣﺗ ﻲﺗﻟﺍ ﺩﺍﻭﻣﻟﺍ ﻊﻣ ﻝﻣﻌﺗ ﻻ

.ﺔﻧﻁﺭﺳﻣﻟﺍ ﺩﺍﻭﻣﻟﺍ ﻥﻣ ﺱ

ﻭ

ﺗﺳ

ﺑ

ﺳﻷﺍ ﺭﺑﺗﻌﻳ

ﺭﺎﺿ ﻪﻧﻷ ﻝﻣﻌﻟﺍ ءﺎﻧﺛﺃ ﺭﺎﺑﻐﻟﺍ ﻥﻭﻛﺗﻳ ﺎﻣﺩﻧﻋ ﺔﻳﺋﺎﻗﻭﻟﺍ ﺭﻳﻳﺎﻌﻣﻟﺍ ﺫﺎﺧﺗﺎﺑ ﻡﻗ

.ﺭﺎﺟﻔﻧﻻﺍ ﻭﺃ ﻕﺍﺭﺗﺣﻼﻟ ﻝﺑﺎﻗ ﻪﻧﺃ ﺎﻣﻛ ،ﺹﺧﺷﻟﺍ ﺔﺣﺻ ﻰﻠﻋ

ﻉﺎﻧﻗ ءﺍﺩﺗﺭﺎﺑ ﻡﻗ .ﻕﺍﺭﺗﺣﻼﻟ ﺔﻠﺑﺎﻗ ﻥﻭﻛﺗ ﺔﺑﺭﺗﻷﺍ ﻉﺍﻭﻧﺃ ﺽﻌﺑ :ﻝﺎﺛﻣ

ﺩﻧﻋ ﺔﺣﻳﺭﺷﻟﺍ/ﺭﺎﺑﻐﻟﺍ ﺹﻼﺧﺗﺳﺍ ﻊﻣ ﻝﻣﺎﻌﺗﻭ ﺭﺎﺑﻐﻟﺍ ﻥﻣ ﺔﻳﺎﻗﻭﻟﺍ

.ﻝﺎﺻﺗﻻﺍ

.ﻪﻌﺿﻭ ﻝﺑﻗ ﺎ

ﻣﺎﻣﺗ ﺯﺎﻬﺟﻟﺍ ﻑﻗﻭﺗﻳ ﻰﺗﺣ ﺎ

ﻣﺋﺍﺩ ﺭﻅﺗﻧﺍ

.ﺔﻳﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻲﻓ ﻡﻛﺣﺗﻟﺍ ﻥﺍﺩﻘﻓﻭ ﻡﺎﺣﺩﺯﻻﺍ ﻲﻓ ﺏﺑﺳﺗﻳ ﺩﻗ ﺓﺩﻌﻟﺍ ﻝﺎﺧﺩﺇ

ﺔﻔﻟﺎﺗﻟﺍ ﺕﻼﺑﺎﻛﻟﺍ ﺱﻣﻠﺗ ﻻ .ﺔﻔﻟﺎﺗﻟﺍ ﺕﻼﺑﺎﻛﻟﺍ ﻊﻣ ﺯﺎﻬﺟﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ

.ﻝﻣﻌﻟﺍ ءﺎﻧﺛﺃ ﻝﺑﺎﻛﻟﺍ ﻑﻠﺗﻳ ﺎﻣﺩﻧﻋ ﺔﻳﺳﻳﺋﺭﻟﺍ ﺕﻼﺑﺎﻛﻟﺍ ﺏﺣﺳﺍﻭ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻﻟ ﺽﺭﻌﺗﻟﺍ ﺓﺭﻭﻁﺧ ﻥﻣ ﺔﻔﻟﺎﺗﻟﺍ ﺕﻼﺑﺎﻛﻟﺍ ﺩﻳﺯﺗ

.ﻙﺭﺣﻣﻟﺍ ءﺯﺟ ﻰﺗﺣ ﺫﺍﺫﺭﻟﺍ ﺏﻧﺟﺗ ﺔﻠﻠﺑﻣ ﺩﺍﻭﻣ ﻊﻣ ﻁﻼﺧﻟﺍ ﻝﻳﻐﺷﺗ ﺩﻧﻋ

ﺯﺎﻬﺟ ﻡﺍﺩﺧﺗﺳﺎﺑ ﻕﻠﻁﻟﺍ ءﺍﻭﻬﻟﺍ ﻲﻓ ﺔﻣﺩﺧﺗﺳﻣﻟﺍ ﺓﺯﻬﺟﻷﺍ ﻝﻳﺻﻭﺗﺑ ﻡﻗ 9

.(RCD) ﻲﻘﺑﺗﻣ ﺭﺎﻳﺗ

ﺕﺎﻔﺻﺍﻭﻣﻟﺍ

ﺯﺍﺭﻁﻟﺍ

UM16VSTUM12VST

*(ﻕﻁﺎﻧﻣﻟﺍ ﺏﺳﺣ) ﻲﺑﺭﻬﻛﻟﺍ ﺩﻬﺟﻟﺍ ﺕﻟﻭﻓ 230

ﺔﻗﺎﻁﻟﺍ ﻝﺎﺧﺩﺇ*ﺕﺍﻭ 1500*ﺕﺍﻭ 1100

ﺔﻋﺭﺳﻟﺍ ﺭﻳﻳﻐﺗ

1212

ﻝﻣﺣ ﻥﻭﺩﺑ ﺔﻋﺭﺳﻟﺍﺔﻘﻳﻗﺩ/ 300 - 150ﺔﻘﻳﻗﺩ /650 - 300ﺔﻘﻳﻗﺩ/ 300 - 150ﺔﻘﻳﻗﺩ/ 650 - 300

ﺏﻳﻠﻘﺗﻟﺍ ﺓﺍﺩﺃ ﻑﺍﺫﻘﻣﻡﻣ 160ﻡﻣ 120

(ﻙﻠﺳﻟﺍ ﻥﻭﺩﺑ) ﻥﺯﻭﻟﺍﻡﺟﻛ 5.6ﻡﺟﻛ 5.4

.ﺔﻘﻁﻧﻣﻟﺍ ﺏﺳﺣ ﺭﻳﻳﻐﺗﻠﻟ ﺔﺿﺭ

ﻋ ﺎﻬﻧﺃ ﺙﻳﺣ ﺞﺗﻧﻣﻟﺍ ﻰﻠﻋ ﺓﺩﻭﺟﻭﻣﻟﺍ ﻡﺳﻻﺍ ﺔﺣﻭﻟ ﺹﺣﻓ ﻥﻣ ﺩﻛﺄﺗ *

ﺔﻳﺳﺎﻳﻗ ﺕﺎﻘﺣﻠﻣ

ﻡﻣ 120 ﻭﺃ (UM16VST) ﻡﻣ 160 ﺏﻳﻠﻘﺗﻟﺍ ﺓﺍﺩﺃ ﻑﺍﺫﻘﻣ (1)

..........................................................(UM12VST)

.................................................................. ﺡﺎﺗﻔﻣﻟﺍ (2)

.............................ﺔﻳﻁﺎﻳﺗﺣﻻﺍ ﺔﻳﻧﻭﺑﺭﻛﻟﺍ ﺔﺷﺍﺭﻔﻟﺍ ﻥﻣ ﺝﻭﺯ 1 (3)

.ﺭﺎﻁﺧﺇ ﻥﻭﺩ ﺔﻳﺳﺎﻳﻘﻟﺍ ﺕﺎﻘﻠﺣﻣﻟﺍ ﻥﺣﺷ ﺏﺟﻳ

ﺕﺎﻘﻳﺑﻁﺗ

ﺕﺎﻘﺻﻼﻟﺍﻭ ﻁﻼﻣﻟﺍ ﻝﺎﺛﻣﻟﺍ ﻝﻳﺑﺳ ﻰﻠﻋ ءﺎﻧﺑﻟﺍ ﺩﺍﻭﻣ ﻕﻭﺣﺳﻣ ﻥﺣﻁ

ﺩﺍﻭﻣﻟﺍﻭ ﺵﻳﻧﺭﻭﻟﺍﻭ ﺕﺎﺑﻳﺫﻣﻟﺍ ﻥﻣ ﻲﻟﺎﺧﻟﺍ ﻥﺎﻫﺩﻟﺍ ﺎ

ﺿﻳﺃﻭ ﺕﺎﺟﺯﻼﻟﺍﻭ

ﺔﻬﺑﺎﺷﻣﻟﺍ

ﻝﻳﻐﺷﺗﻟﺍ ﻝﺑﻗ

ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ 1

ﺕﺎﺑﻠﻁﺗﻣﻟ ﻕﺑﺎﻁﻣ ﻪﻣﺍﺩﺧﺗﺳﺍ ﻡﺗﻳﺳ ﻱﺫﻟﺍ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ

.ﺞﺗﻧﻣﻟﺍ ﻰﻠﻋ ﺓﺩﻭﺟﻭﻣﻟﺍ ﻡﺳﻻﺍ ﺔﺣﻭﻟ ﻰﻠﻋ ﺓﺩﺩﺣﻣﻟﺍ ﺔﻗﺎﻁﻟﺍ

ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ

ﺱﺑﺎﻘﻟﺍ ﻝﻳﺻﻭﺗ ﺔﻟﺎﺣ ﻲﻓ .ﻑﺎﻘﻳﺇ ﻊﺿﻭﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ

ﺓﺍﺩﺃ ﻝﻳﻐﺷﺗ ﻡﺗﻳﺳﻓ ،ﻝﻳﻐﺷﺗ ﻊﺿﻭﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ ﻥﺎﻛﻭ ﺱﺑﻘﻣﻟﺎﺑ

.ﺭﻳﻁﺧ ﺙﺩﺎﺣ ﻉﻭﻗﻭ ﻰﻟﺇ ﻱﺩﺅﻳ ﺎﻣﻣ ،ﺭﻭﻔﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ

ﻲﻓﺎﺿﻹﺍ ﻝﻳﺻﻭﺗﻟﺍ ﻙﻠﺳ

ﻝﻳﺻﻭﺗ ﻙﻠﺳ ﻡﺩﺧﺗﺳﺍ ،ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﻣ ﻝﻣﻌﻟﺍ ﺔﻘﻁﻧﻣ ﺔﻟﺍﺯﺇ ﺩﻧﻋ

ﻝﻳﺻﻭﺗﻟﺍ ﻙﻠﺳ ﻝﻅﻳ ﻥﺃ ﺏﺟﻳ .ﺔﻧﻧﻘﻣ ﺔﻌﺳﻭ

ﻑﺎﻛ ﻙﻣﺳ ﻭﺫ ﻲﻓﺎﺿﺇ

.ﻉﺎﻁﺗﺳﻣﻟﺍ ﺭﺩﻘﺑ ﺍ

ﺭﻳﺻﻗ ﻲﻓﺎﺿﻹﺍ

(

2 ﻝﻛﺷﻟﺍ) ﻪﻛﻓﻭ ﺏﻳﻠﻘﺗﻟﺍ ﺓﺍﺩﺃ ﻑﺍﺫﻘﻣ ﺏﻳﻛﺭﺗ 4

ﺭــﻳﺫـﺣـﺗ

ﻑﺎﻘﻳﺇ ﻊﺿﻭ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﺩﻭﺟﻭ ﻥﻣ ﺩﻛﺄﺗ ،ﺓﺭﻳﻁﺧﻟﺍ ﺙﺩﺍﻭﺣﻟﺍ ﺏﻧﺟﺗﻟ

.ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻝﺻﻓﻭ ،ﻝﻳﻐﺷﺗﻟﺍ

ﻥﺍﺭﻭﺩﻟﺍ ﺩﺍﻭﻣﻋ ﻙﺳﻣﺍ .ﻥﺍﺭﻭﺩﻟﺍ ﺩﻭﻣﻌﺑ ﺏﻳﻠﻘﺗﻟﺍ ﺓﺍﺩﺃ ﻑﺍﺫﻘﻣ ﺕﻳﺑﺛﺗﺑ ﻡﻗ (1)

ﻩﺎﺟﺗﺍ ﻲﻓ ﺭﺧﺁ ﺡﺎﺗﻔﻣﺑ ﺏﻳﻠﻘﺗﻟﺍ ﺓﺍﺩﺃ ﻑﺍﺫﻘﻣ ﻑﻟﻭ ﺡﺎﺗﻔﻣﻟﺍ ﻊﻣ ﻪﻧﺎﻛﻣ ﻲﻓ

.ﻡﺎﻛﺣﺈﺑ ﻪﻁﺑﺭﺍ .(ﻲﻣﺎﻣﻷﺍ ﺏﻧﺎﺟﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ) ﺔﻋﺎﺳﻟﺍ ﺏﺭﺎﻘﻋ

.ﻲﺳﻛﻌﻟﺍ ﻩﺎﺟﺗﻻﺍ ﻲﻓ ﺏﻳﻠﻘﺗﻟﺍ ﺓﺩﺃ ﻑﺍﺫﻘﻣ ﻙﻓ ﻡﺗﻳ (2)

ﺔﺿﻔﺧﻧﻣﻟﺍ ﺔﻋﺭﺳﻟﺍ/ﺔﻌﻔﺗﺭﻣﻟﺍ ﺔﻋﺭﺳﻟﺍ ﺭﻳﻳﻐﺗ 5

ﻥﺃﻭ ،ﻝﻳﻐﺷﺗﻟﺍ ﻑﺎﻘﻳﺇ ﻊﺿﻭ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﻥﺃ ﺩﻛﺄﺗ ،ﺔﻋﺭﺳﻟﺍ ﺭﻳﻳﻐﺗ ﻝﺑﻗ

.ﺎ

ﻣﺎﻣﺗ ﻑﻗﻭﺗ ﺯﺎﻬﺟﻟﺍ

ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﻲﻔﻠﺧﻟﺍ ﻥﺍﺭﻭﺩﻟﺍ ﺹﺭﻗ ﺭﻳﻭﺩﺗﺑ ﻡﻗ ،ﺔﻋﺭﺳﻟﺍ ﺭﻳﻳﻐﺗﻟ

ﻡﺳﺟ ﻲﻓ ﺎﻫﺭﻔﺣ ﻡﺗ "1" ﺔﻳﺩﺩﻌﻟﺍ ﺔﻣﻳﻘﻟﺍ .3 ﻝﻛﺷﻟﺍ ﻲﻓ ﻡﻬﺳﻟﺍ ﺔﻁﺳﺍﻭﺑ

ﺭﻳﺷﺗ "2" ﺔﻳﺩﺩﻌﻟﺍ ﺔﻣﻳﻘﻟﺍﻭ /ﺔﺿﻔﺧﻧﻣﻟﺍ ﺔﻋﺭﺳﻟﺍ ﻰﻟﺇ ﺭﻳﺷﺗ ﻲﺗﻟﺍﻭ ﺯﺎﻬﺟﻟﺍ

.ﺔﻌﻔﺗﺭﻣﻟﺍ ﺔﻋﺭﺳﻟﺍ ﻰﻟﺇ

ﺩﻭﻣﻋ ﻑﻠﺑ ﻡﻘﻓ ،ﻲﻔﻠﺧﻟﺍ ﻥﺍﺭﻭﺩﻟﺍ ﺹﺭﻗ ﻑﻟ ﺏﻌﺻﻟﺍ ﻥﻣ ﻥﺎﻛ ﺍﺫﺇ

.ﻯﺭﺧﺃ ﺓﺭﻣ ﻲﻔﻠﺧﻟﺍ ﻥﺍﺭﻭﺩﻟﺍ ﺹﺭﻗ ﻑﻟ ﻡﺛ ﻩﺎﺟﺗﺍ ﻱﺃ ﻲﻓ ﻥﺍﺭﻭﺩﻟﺍ

ﺔﻴﺑﺮﻌﻟا

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﺔﻣﻼﺳﺑ ﺔﺻﺎﺧﻟﺍ ﺔﻣﺎﻌﻟﺍ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ

ﺭﻳﺫﺣﺗ

.ﺕﺎﻣﻳﻠﻌﺗﻟﺍ ﺔﻓﺎﻛﻭ ﺔﻣﻼﺳﻟﺍ ﺕﺍﺭﻳﺫﺣﺗ ﺔﻓﺎﻛ ﺓءﺍﺭﻘﺑ ﻡﻗ

ﺔﻣﺩﺻ ﻲﻓ ﻩﺎﻧﺩﺃ ﺓﺩﺭﺳﻣﻟﺍ ﺕﺎﻣﻳﻠﻌﺗﻟﺍﻭ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﻉﺎﺑﺗﺍ ﻲﻓ ﻝﺷﻔﻟﺍ ﺏﺑﺳﺗﻳ ﺩﻗ

.ﺔﺑﺎﺻﺇ ﻭﺃ/ﻭ ،ﻕﻳﺭﺣ ﻭﺃ ﺔﻳﺋﺎﺑﺭﻬﻛ

ﻼﺑﻘﺗﺳﻣ ﺎﻬﻳﻟﺇ ﻉﻭﺟﺭﻠﻟ ﺕﺎﻣﻳﻠﻌﺗﻟﺍﻭ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﺔﻓﺎﻛ ﻅﻔﺣﺍ

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻰﻟﺇ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﻲﻓ "ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ" ﺢﻠﻁﺻﻣ ﺭﻳﺷﻳ

ﺓﺩﻌﻟﺍ ﻭﺃ ﻙﺑ ﺔﺻﺎﺧﻟﺍ ﺔﻳﺳﻳﺋﺭﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﺕﻼﺻﻭﻣ ﻝﻣﻌﺗ ﻲﺗﻟﺍ (ﺔﻳﻛﻠﺳﻟﺍ)

.ﺔﻳﺭﺎﻁﺑﻟﺎﺑ ﻝﻣﻌﺗ ﻲﺗﻟﺍ (ﺔﻳﻛﻠﺳﻼﻟﺍ) ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﻝﻣﻌﻟﺍ ﺔﻘﻁﻧﻣ ﺔﻣﻼﺳ (

.ﻙﻠﻐﺷ ﻥﺎﻛﻣ ﺓءﺎﺿﺇ ﻥﺳﺣﻭ ﺔﻓﺎﻅﻧ ﻰﻠﻋ ﻅﻓﺎﺣ (ﺃ

ﺏﺑﺳﺗﺗ ﺓءﺎﺿﻣ ﺭﻳﻐﻟﺍ ﻝﻣﻌﻟﺍ ﺕﻻﺎﺟﻣﻭ ﻝﻣﻌﻟﺍ ﻥﺎﻛﻣ ﻲﻓ ﻰﺿﻭﻔﻟﺎﻓ

.ﺙﺩﺍﻭﺣ ﻉﻭﻗﻭ ﻲﻓ

ﺩﻭﺟﻭ ﻲﻓ ﻱﺃ ﺔﻳﺭﺎﺟﻔﻧﺍ ءﺍﻭﺟﺃ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻳﻐﺷﺗﺑ ﻡﻘﺗ ﻻ (ﺏ

.ﺭﺎﺑﻏ ﻭﺃ ﻝﺎﻌﺗﺷﻼﻟ ﺔﻠﺑﺎﻗ ﺕﺍﺯﺎﻏ ﻭﺃ ﻝﺋﺍﻭﺳ

.ﺔﻧﺧﺩﻷﺍ ﺭﺎﺑﻏ ﻝﺎﻌﺷﺇ ﻰﻠﻋ ﻝﻣﻌﺗ ﺓﺭﺍﺭﺷ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺙﺩﺣﺗ

ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ ﻥﻋ ﺓﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻭﻛﺗ ﻥﺃ ﻰﻠﻋ ﻅﻓﺎﺣ (ﺕ

.ﻙﺑ ﻥﻳﻁﻳﺣﻣﻟﺍ ﻭﺃ

ﻙﺩﻘﻓ ﻰﻟﺇ ﻱﺩﺅﺗ ﻥﺃ ﻥﻛﻣﻣﻟﺍ ﻥﻣ ﺕﻳﺗﺷﺗﻟﺍ ﻝﺎﻛﺷﺃ ﻥﻣ ﻝﻛﺷ ﻱﺃ

.ﺓﺭﻁﻳﺳﻟﺍ

ﺔﻳﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﻥﻣ ﺔﻳﺎﻗﻭﻟﺍ (

ﻱﺎﺑ ﺱﺑﺎﻘﻟﺍ ﻝﻳﺩﻌﺗ ﺭﻅﺣﻳ ،ءﺎﺑﺭﻬﻛﻟﺍ ﺫﻔﻧﻣﺑ ﺱﺑﺎﻘﻟﺍ ﻝﻳﺻﻭﺗ ﺏﺟﻳ (ﺃ

.ﺔﻘﻳﺭﻁ

.ﺔﻳﺿﺭﻷﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻊﻣ ﺊﻳﺎﻬﻣ ﺱﺑﺎﻗ ﻱﺃ ﻡﺩﺧﺗﺳﺗ ﻻ

ﺭﻁﺧ ﻥﻣ ﺔﻣﺋﻼﻣﻟﺍ ﺱﺑﺎﻘﻣﻟﺍﻭ ﺎﻫﺭﻳﻳﻐﺗ ﻡﺗﻳ ﻡﻟ ﻲﺗﻟﺍ ﺱﺑﺍﻭﻘﻟﺍ ﺽﻔﺧﺗ

. ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﺙﻭﺩﺣ

ﺏﻳﺑﺎﻧﻷﺍ ﻝﺛﻣ ﺔﻳﺿﺭﻷﺍ ﺢﻁﺳﻷﺍ ﻊﻣ ﻱﺩﺳﺟﻟﺍ ﺱﻣﻼﺗﻟﺍ ﺏﻧﺟﺗ (ﺏ

.ﺩﻗﺍﻭﻣﻟﺍﻭ ﺕﺎﺟﻼﺛﻟﺍﻭ ﺔﻳﺭﺍﺭﺣﻟﺍ ﺕﻻﺩﺎﺑﻣﻟﺍﻭ

ﻙﺎﻧﻫ ﺔﻳﺿﺭﻷﺍ ﺢﻁﺳﻷﺍ ﻙﻠﺗ ﻥﻣ ﻱﻷ ﻙﻣﺳﺟ ﺔﺳﻣﻼﻣ ﺔﻟﺎﺣ ﻲﻓ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻﻟ ﻙﺿﺭﻌﺗﻟ ﺓﺭﻭﻁﺧ

.ﺔﺑﻭﻁﺭﻟﺍ ﻭﺃ ﺭﻁﻣﻠﻟ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺽﺭﻌﺗ ﻻ (ﺕ

ﺓﺩﻌﻟﺍ ﻝﺧﺍﺩ ﻰﻟﺇ ءﺎﻣﻟﺍ ﺏﺭﺳﺗ ﻥﺇ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﺭﻁﺧ ﺩﺍﺩﺯﻳ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﻭﺃ ﻝﻣﺣﻟ

ﺎﻘﻠﻁﻣ ﻪﻠﻣﻌﺗﺳﺗ ﻻ ،(ﻙﻠﺳﻟﺍ) ﻝﺑﺎﻛﻟﺍ ﻝﺎﻣﻌﺗﺳﺍ ءﻲﺳﺗ ﻻ (ﺙ

.ﺱﺑﻘﻣﻟﺍ ﻥﻣ ﺱﺑﺎﻘﻟﺍ ﺏﺣﺳﻟ ﻭﺃ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻊﻓﺩ ﻭﺃ ﺩﺷ

ﻑﺍﻭﺣﻟﺍ ﻭﺃ ﺕﻳﺯﻟﺍ ﻭﺃ ﺓﺭﺍﺭﺣﻟﺍ ﺭﺩﺎﺻﻣ ﻥﻋ

ﺍﺩﻳﻌﺑ ﻪﻳﻠﻋ ﻅﻓﺎﺣﻭ

.ﺔﻛﺭﺣﺗﻣﻟﺍ ﺯﺎﻬﺟﻟﺍ ءﺍﺯﺟﺃ ﻭﺃ ﺓﺩﺎﺣﻟﺍ

ﺕﺎﻣﺩﺻﻟﺍ ﺭﻁﺧ ﻥﻣ ﺔﻛﺑﺎﺷﺗﻣﻟﺍ ﻭﺃ ﺔﻔﻟﺎﺗﻟﺍ (ﻙﻼﺳﻷﺍ) ﺕﻼﺑﺎﻛﻟﺍ ﺩﻳﺯﺗ

.ﺔﻳﺑﺭﻬﻛﻟﺍ

ﻙﻠﺳ ﻡﺍﺩﺧﺗﺳﺎﺑ ﺢﺻﻧﻳ ،ﺝﺭﺎﺧﻟﺎﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﺔﻟﺎﺣ ﻲﻓ (ﺝ

.ﻲﺟﺭﺎﺧﻟﺍ ﻝﺎﻣﻌﺗﺳﻻﺍ ﻊﻣ ﺏﺳﺎﻧﺗﻳ (ﻝﺑﺎﻛ)

ﻥﻣ ﻝﻳﻠﻘﺗﻠﻟ ﻲﺟﺭﺎﺧﻟﺍ ﻝﺎﻣﻌﺗﺳﻻﺍ ﻊﻣ ﺏﺳﺎﻧﻣ ﻙﻠﺳ ﻡﺍﺩﺧﺗﺳﺎﺑ ﻡﻗ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻﻟ ﺽﺭﻌﺗﻟﺍ ﺓﺭﻭﻁﺧ

ﺭﻔﻣ ﻻ ﺭﻣﺃ ﺏﻁﺭ ﻥﺎﻛﻣ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻥﻭﻛﻳ ﺎﻣﺩﻧﻋ (ﺡ

(RCD)

ﻲﻘﺑﺗﻣﻟﺍ ﻲﺑﺭﻬﻛﻟﺍ ﺭﺎﻳﺗﻠﻟ ﻲﻣﺣﻣﻟﺍ ﺩﻭﺯﻣﻟﺍ ﻡﺩﺧﺗﺳﺎﻓ ،ﻪﻧﻣ

ﺕﺎﻣﺩﺻﺑ ﺔﺑﺎﺻﻹﺍ ﺭﻁﺎﺧﻣ ﻝﻳﻠﻘﺗ ﻰﻠﻋ

RCD

ﻡﺍﺩﺧﺗﺳﺍ ﻝﻣﻌﻳ

.ﺔﻳﺑﺭﻬﻛ

ﺔﻳﺻﺧﺷﻟﺍ ﺔﻣﻼﺳﻟﺍ (

ﺓﺩﻌﻟﺍ ﺔﻁﺳﺍﻭﺑ ﻝﻣﻌﻟﺎﺑ ﻡﻗﻭ ﻪﻠﻌﻔﺗ ﺎﻣ ﻰﻟﺇ ﻪﺑﺗﻧﺃﻭ ﺎ

ﻅﻘﻳ ﻥﻛ (ﺃ

ﻙﺭﻭﻌﺷ ﺔﻟﺎﺣ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ .ﻝﻘﻌﺗﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﺩﺍﻭﻣ ﻭﺃ ﺔﻳﻭﺩﺃ ﻭﺃ ﺓﺭﺩﺧﻣ ﺩﺍﻭﻣ ﺭﻳﺛﺄﺗ ﺕﺣﺗ ﺕﻧﻛ ﺍﺫﺇ ﻭﺃ ﺏﻌﺗﻟﺎﺑ

.ﺔﻳﻟﻭﺣﻛ

ﻱﺩﺅﻳ ﺩﻗ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺇ ﺩﻧﻋ ﺓﺩﺣﺍﻭ ﺔﻅﺣﻠﻟ ﻩﺎﺑﺗﻧﻹﺍ ﻡﺩﻋ

.ﺓﺭﻳﻁﺧ ﺔﺑﺎﺻﺇ ﻰﻟﺇ

.ﻥﻳﻌﻠﻟ ﻲﻗﺍﻭﻟﺍ ﻉﺎﻧﻘﻟﺍ ءﺍﺩﺗﺭﺎﺑ ﺎ

ﻣﺋﺍﺩ ﻡﻗ .ﻥﺎﻣﻷﺍ ﺕﺍﻭﺩﺃ ﻡﺩﺧﺗﺳﺍ (ﺏ

ﺔﻳﺫﺣﺃ ﻭﺃ ﺭﺎﺑﻐﻟﺍ ﻥﻣ ﻲﻗﺍﻭﻟﺍ ﻉﺎﻧﻘﻟﺍ ﻝﺛﻣ ﺔﻳﺎﻣﺣﻟﺍ ﺕﺍﻭﺩﺃ ﻝﻣﻌﺗﺳ

ﻊﻣﺳﻟﺍ ﺔﻳﺎﻣﺣ ﺓﺯﻬﺟﺃ ﻭﺃ ﺔﺑﻠﺻ ﺔﻌﺑﻗ ﻭﺃ ﻕﻻﺯﻧﻼﻟ ﺓﺩﺎﺿﻣﻟﺍ ﻥﺎﻣﻷﺍ

ﺕﻻﺎﻣﺗﺣﺍ ﻝﻳﻠﻘﺗ ﻰﻠﻋ ﺔﻧﻳﻌﻣ ﻑﻭﺭﻅ ﻲﻓ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ ﻡﺗﻳ ﻲﺗﻟﺍﻭ

.ﺔﻳﺻﺧﺷ ﺕﺎﺑﺎﺻﻹ ﺽﺭﻌﺗﻟﺍ

ﻊﺿﻭﻟﺍ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ .ﺩﻭﺻﻘﻣﻟﺍ ﺭﻳﻏ ﻝﻳﻐﺷﺗﻟﺍ ﻊﻧﻣ (ﺕ

ﺔﻣﺯﺣ ﻭﺃ/ﻭ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣﺑ ﻝﻳﺻﻭﺗﻟﺍ ﻝﺑﻗ ﻝﻳﻐﺷﺗﻟﺍ ﻑﺎﻘﻳﺇ

.ﺓﺍﺩﻷﺍ ﻝﻣﺣ ﻭﺃ ﻁﺎﻘﺗﻟﻻﺍﻭ ،ﺔﻳﺭﺎﻁﺑﻟﺍ

ﻭﺃ ﺡﺎﺗﻔﻣﻟﺍ ﻲﻓ ﻙﻌﺑﺻﺇ ﺩﻭﺟﻭ ﻊﻣ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻣﺣ ﻱﺩﺅﻳ

ﻝﻳﻐﺷﺗﻟﺍ ﻊﺿﻭ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﺎﻬﻳﻓ ﻥﻭﻛﻳ ﻲﺗﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ

.ﺙﺩﺍﻭﺣ ﻉﻭﻗﻭ ﻝﺎﻣﺗﺣﺍ ﻰﻟﺇ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻝﺑﻗ ﻁﺑﺭﻟﺍ ﺡﺎﺗﻔﻣ ﻭﺃ ﻁﺑﺿﻟﺍ ﺩﺩﻋ ﻉﺯﻧﺍ (ﺙ

ﻥﻣ ﻙﺭﺣﺗﻣﻟﺍ ءﺯﺟﻟﺍ ﺭﺎﺳﻳ ﻰﻠﻋ ﻁﺑﺿ ﺡﺎﺗﻔﻣ ﻭﺃ ﻁﺑﺭ ﺡﺎﺗﻔﻣ ﺩﻭﺟﻭ

.ﺔﻳﺻﺧﺷ ﺔﺑﺎﺻﺇ ﺙﻭﺩﺣ ﻰﻟﺇ ﻱﺩﺅﻳ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

ﻥﻳﺑﻭ ﻙﻧﻳﺑ ﺔﺑﺳﺎﻧﻣ ﺔﻓﺎﺳﻣ ﻙﺭﺗﺍ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻥﻣ ﺏﺭﺗﻘﺗ ﻻ (ﺝ

.ﺕﺎﻗﻭﻷﺍ ﻊﻳﻣﺟ ﻲﻓ ﻙﻧﺯﺍﻭﺗ ﻰﻠﻋ ﻅﻓﺎﺣﻭ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

ﻲﻓ ﻝﺿﻓﺃ ﻝﻛﺷﺑ ﺯﺎﻬﺟﻟﺍ ﻰﻠﻋ ﺓﺭﻁﻳﺳﻟﺍ ﻥﻣ ﻙﻟﺫ ﻙﻟ ﺢﻣﺳﻳﺳ

.ﺔﻌﻗﻭﺗﻣﻟﺍ ﺭﻳﻏ ﻑﻗﺍﻭﻣﻟﺍ

ﺎﻬﺑ ﻭﺃ ﺔﺿﺎﻔﺿﻓ ﺱﺑﻼﻣ ﻱﺩﺗﺭﺗ ﻻ ،ﺔﺑﺳﺎﻧﻣ ﺱﺑﻼﻣ ءﺍﺩﺗﺭﺎﺑ ﻡﻗ (ﺡ

ﺱﺑﻼﻣﻟﺍﻭ ﻙﺭﻌﺷ ﺩﺎﻌﺑﺇ ﻰﻠﻋ

ﺎﻣﺋﺍﺩ ﻅﻓﺎﺣﻭ ،ﻲﻠﺣ ﻭﺃ ﺔﺑﺋﺎﺳ ﻑﺍﺭﻁﺃ

ﺓﺩﻌﻟﺍ ﻥﻣ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺍ ﻥﻋ

ﺍﺩﻳﻌﺑ ﺯﺎﻔﻘﻟﺍﻭ ﺎﻬﻳﺩﺗﺭﺗ ﻲﺗﻟﺍ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﻲﻠﺣﻟﺍ ﻭﺃ ﻑﺍﺭﻁﺃ ﺎﻬﺑ ﻲﺗﻟﺍ ﻭﺃ ﺔﺿﺎﻔﺿﻔﻟﺍ ﺱﺑﻼﻣﻟﺍ ﻙﺑﺷﺎﺗﺗ ﺩﻗ

.ﺏﺎﻘﺛﻣﻠﻟ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺎﺑ ﻝﻳﻭﻁﻟﺍ ﺭﻌﺷﻟﺍﻭﺃ

ﻡﺗﻳﻭ ﺔﻠﺻﺗﻣ ﻥﻣ ﺩﻛﺄﺗﻓ .ﺭﺎﺑﻐﻟﺍ ﻊﻳﻣﺟﺗﻭ ﻁﻔﺷ ﺯﺎﻬﺟ ﺏﻳﻛﺭﺗ ﺯﺎﺟ ﻥﺇ (ﺥ

.ﻡﻳﻠﺳ ﻝﻛﺷﺑ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ

ﻥﻋ ﺔﻣﺟﺎﻧﻟﺍ ﺭﻁﺎﺧﻣﻟﺍ ﻝﻳﻠﻘﺗ ﻰﻟﺇ ﺭﺎﺑﻐﻟﺍ ﻊﻳﻣﺟﺗ ﻡﺍﺩﺧﺗﺳﺍ ﻱﺩﺅﻳ ﺩﻗ

.ﺭﺎﺑﻐﻟﺍ

:ﺎﻬﺑ ﺔﻳﺎﻧﻌﻟﺍﻭ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﺔﻘﻳﺭﻁ (

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺍﻭ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﻲﻓ ﻁﺭﻔﺗ ﻻ (ﺃ

.ﻪﺑ ﻡﻭﻘﺗ ﻱﺫﻟﺍ ﻝﻣﻌﻠﻟ ﺔﺑﺳﺎﻧﻣﻟﺍ

ﻙﺩﻋﺎﺳﻳ ﺍﺫﻫ ﻥﺈﻓ ﻙﻟﺫﻟ ﺔﺻﺻﺧﻣﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻙﻣﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ

ﻡﺗ ﻲﺗﻟﺍ ﺔﻣﻬﻣﻠﻟ

ﺎﻌﺑﺗ

ﺎﻧﻣﺃ ﺭﺛﻛﺃﻭ ﻝﺿﻓﺃ ﺔﺟﻳﺗﻧ ﻰﻠﻋ ﻝﻭﺻﺣﻟﺍ ﻰﻠﻋ

.ﺎﻬﻟ ﺏﺎﻘﺛﻣﻟﺍ ﻡﻳﻣﺻﺗ

ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ ﻝﻣﻌﻟﺍ ﻥﻋ ﻝﻳﻐﺷﺗﻟﺍ ﺡﺎﺗﻔﻣ ﻝﻁﻌﺗ ﺔﻟﺎﺣ ﻲﻓ (ﺏ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﺎﻬﺑ ﺹﺎﺧﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﺡﺎﺗﻔﻣ ﻲﻓ ﻡﻛﺣﺗﻟﺍ ﻥﻛﻣﻳ ﻻ ﺔﻳﺋﺎﺑﺭﻬﻛ ﺓﺩﻋ ﻱﺃ

.ﺡﺎﺗﻔﻣﻟﺍ ﺍﺫﻫ ﺡﻼﺻﺇ ﺏﺟﻳﻭ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ

ﺍﺭﻁﺧ ﻝﻛﺷﺗ ﺎﻬﻧﺈﻓ

ﻥﻣ ﺔﻳﺭﺎﻁﺑﻟﺍ ﺔﻣﺯﺣ ﻭﺃ/ﻭ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﻣ ﺱﺑﺎﻘﻟﺍ ﻝﺻﻔﺑ ﻡﻗ (ﺕ

ﻭﺃ ﺕﺎﻘﺣﻠﻣﻟﺍ ﺭﻳﻳﻐﺗ ﻭﺃ ﺕﻼﻳﺩﻌﺗ ﻱﺃ ﻝﻣﻋ ﻝﺑﻗ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻳﺯﺧﺗ

ﺭﻳﻏ ﻝﻛﺷﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻩﺫﻫ ﻁﺎﻳﺗﺣﻻﺍ ﺕﺍءﺍﺭﺟﺇ ﻊﻧﻣﺗ

.ﺩﻭﺻﻘﻣ

ﻝﻭﺎﻧﺗﻣ ﻥﻋ

ﺃﺩﻳﻌﺑ ﺔﻣﺩﺧﺗﺳﻣ ﺭﻳﻐﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻳﺯﺧﺗﺑ ﻡﻗ (ﺙ

ﻝﻳﻐﺷﺗ ﻥﻋ ﺓﺭﻛﻓ ﻪﻳﺩﻟ ﺱﻳﻟ ﺹﺧﺷ ﻱﻷ ﺢﻣﺳﺗ ﻻﻭ ﻝﺎﻔﻁﻷﺍ

.ﺎﻬﻠﻳﻐﺷﺗ ﻭﺃ ﺕﺍﻭﺩﻷﺍ ﻩﺫﻫ ﻥﻣ ﺏﺍﺭﺗﻗﻻﺎﺑ ﺏﺎﻘﺛﻣﻟﺍ

ﻥﻳﺑﺭﺩﻣ ﺭﻳﻐﻟﺍ ﺹﺎﺧﺷﻷﺍ ﻱﺩﻳﺃ ﻲﻓ ﺓﺭﻭﻁﺧ ﻝﺛﻣﺗ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺃ

.ﺎﻬﻳﻠﻋ

ﺔﻳﺣﺎﻧ ﻥﻣ

ﺍﺩﻳﺟ ﺎﻬﺻﺣﻔﺑ ﻡﻗ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺔﻣﻼﺳ ﻥﻣ ﺩﻛﺄﺗ (ﺝ

ءﺯﺟ ﻱﺃ ﻲﻓ ﺭﺳﻛ ﻱﺃ ﺩﻭﺟﻭ ﻭﺃ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺍ ﻁﺑﺍﺭﺗ ﻯﺩﻣ

.ﺎﻬﻠﻳﻐﺷﺗ ﻰﻠﻋ ﺭﺛﺅﻳ ﺎﻣﺑ ﺎﻬﺋﺍﺯﺟﺃ ﻥﻣ

ﻝﺑﻗ ﺎﻬﺣﻼﺻﺇ ﺏﺟﻳ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺄﺑ ﻑﻠﺗ ﺙﻭﺩﺣ ﺔﻟﺎﺣ ﻲﻓ

.ﻡﺍﺩﺧﺗﺳﻻﺍ

ﺭﻳﻏ ﻝﻛﺷﺑ ﺔﻧﺎﻳﺻﻟﺍ ﺔﻳﻠﻣﻌﺑ ﻡﺎﻳﻘﻟﺍ ﻭﺃ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺃ ﺔﻧﺎﻳﺻ ﻡﺩﻋ

.ﺙﺩﺍﻭﺣﻟﺍ ﻥﻣ ﺭﻳﺛﻛﻟﺍ ﺙﻭﺩﺣ ﻰﻟﺇ ﻱﺩﺅﻳ ﺢﻳﺣﺻ

ﺔﻔﻳﻅﻧﻭ ﺓﺩﺎﺣ ﻊﻳﻁﻘﺗﻟﺍ ﺕﺍﻭﺩﺃ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﻰﺟﺭﻳ (ﺡ

ﻝﻬﺳﻳ ﺙﻳﺣﺑ ﻑﺍﻭﺣﻟﺍ ﺓﺩﺎﺣ ﻊﻳﻁﻘﺗﻟﺍ ﺕﺍﻭﺩﺃ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﻰﺟﺭﻳ

.ﺎﻬﻳﻓ ﻡﻛﺣﺗﻟﺍ

ﻙﻟﺫ ﺭﻳﻏﻭ ﺓﺩﻌﻟﺍ ءﺍﺯﺟﺃﻭ ،ﺕﺎﻘﺣﻠﻣﻟﺍﻭ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺍ (ﺥ

ﻑﻭﺭﻅ ﺭﺎﺑﺗﻋﻻﺍ ﻲﻓ ﻊﺿﻭﻟﺍ ﻊﻣ ،ﺕﺎﻣﻳﻠﻌﺗﻟﺍ ﻩﺫﻫ ﻊﻣ ﻕﻓﺍﻭﺗﻳ ﺎﻣﻳﻓ

.ﺎﻬﻘﻳﻘﺣﺗ ﺏﻭﻠﻁﻣﻟﺍ ﻝﺎﻣﻋﻷﺍﻭ ﻝﻣﻌﻟﺍ

ﻰﻟﺇ ﺎﻬﻟ ﺔﺻﺻﺧﻣﻟﺍ ﺭﻳﻏ ﺽﺍﺭﻏﻸﻟ ﺔﻗﺎﻁﻟﺍ ﺓﺍﺩﺃ ﻡﺩﺧﺗﺳﺍ ﻱﺩﺅﻳ ﺩﻗ

.ﺭﻳﻁﺧ ﻑﻗﻭﻣ ﺩﻭﺟﻭ

UM16VST

UM12VST

509

Code No. C99189351 Ō

Printed in China

Hitachi um 16vst Handling Instructions Manual

Brand: Hitachi

Model: um 16vst

Category: Power tools

Type: Handling Instructions Manual

This manual is also suitable for

um 12vst

Download PDF

report

Hitachi um 16vst Handling Instructions Manual

This manual is also suitable for

Hitachi um 16vst Handling Instructions Manual

Related papers

Other documents