Zvox Audio SoundBase 555 Installation guide

SoundBase 555
Brand
Zvox Audio
Model
SoundBase 555
Type
Installation guide

This manual is also suitable for

ZVOX Z-Base 555 Quick Setup
“TV base” position
Back of Z-Base 555
Shelf position
AC Power Receptacle
Place the Z-Base 555 on stable, flat surface.
Ensure all components are safe and secure.
Optical Audio Output
Select the TV input using the remote control
Z-Base 555’s Optical Audio Input
Connect the AC power cord to the back of
the Z-Base 555. Leave the Power Switch
in “Off”. Then insert the AC plug into an AC
power receptacle.
OFF
Flip on the Power.
Connect to Audio Output of TV.
Connect to Audio Input of Z-Base 555.
Select the correct input.
Back of TV
ON
Optical
digital input
Input 1
(rear panel)
Coaxial
digital input
Input 2
(rear panel)
Input 3
(front panel)
Connect one end of an optical digital (toslink)
cable to the TV’s Audio Out optical jack.
Connect the other end of the optical cable
to the Z-Base 555’s optical input jack.
Phono Jack Analog
Audio Out
Coaxial Digital Audio Output
Any cable with a phono plug at each
end can be used.
“Minijack” Analog Audio Out
Position The Z-Base 555.
Connect the power cord.
1
2
Back of Z-Base 555
or the front panel.
Back of TV
Back of
Z-Base 555
Back of Z-Base 555
Back of TV
Back of TV
Out Some TVs use a “minijack” output
(not “input”) or headphone jack.
White/red pair of phono output
jacks (not “input”) on back of TV.
(Single phono jack, may be orange)
Other Audio Connection Options
Input 1
Input 1
Back of Z-Base 555
  • Page 1 1

Zvox Audio SoundBase 555 Installation guide

SoundBase 555
Brand
Zvox Audio
Model
SoundBase 555
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents