Shine Company 4205WT Operating instructions

Type
Operating instructions
How To Assemble Your Garden Bench
PARTS INCLUDED:
20 PCS
Nuts
(Rev. 9/2016)
20 PCS
Machine Thread
(6 x 45 m/m)
2 PCS
Machine Thread
(6 x 45 m/m)
& 2 PCS Nuts
2 PCS
Machine Thread
(6 x 45 m/m)
& 2 PCS Nuts
2 PCS
Machine Thread
(6 x 45 m/m)
& 2 PCS Nuts
2 PCS
Machine Thread
(6 x 45 m/m)
2 PCS
Machine Thread
(6 x 45 m/m)
2 PCS
Nuts
2 PCS
Nuts
Table Top
1 PC
A
A
2 PCS
Legs
B1
B2
B1
B2
Legs
C1
C2
C1
C2
2 PCS 2 PCS
Short
Support Slat
D
B
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling bench,
DO NOT completely tighten the bolts and
nuts until all the parts and holes are properly aligned.
Step 1: Attach , & , Legs to Bench Top using 16 pcs of Machine Thread
(6 x 45 m/m) and 16 nuts.
Step 2: Line up 2 nuts into the holes of Short Support Slat and attach to the Leg
with 2 pcs of Machine Thread (6 x 45 m/m). Repeat with the remaining Slat
on the other side.
D
D
C2
C1
B1
  • Page 1 1

Shine Company 4205WT Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI