Page is loading ...
How To Assemble Your Bench
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling bench, DO NOT completely tighten the bolts and nuts
until all the parts & holes are properly aligned.
(REV. 9/2016)
A
A
A
A
A
A
B
C
B
A
D
D
B
C
D
E
6 pcs
2 pcs
1 pc
2 pcs
1 pc
Step 1:
Step 2:
Step 3:
This bench is not recommended for weight of more than 220lbs.
Care should be taken to avoid tipping while seated.
This bench is designed for use on level ground only. Do not use on unlevel ground.
To avoid harm or injury - do not sit on arms.
Product is for residential use only - not meant for commercial use.
PARTS INCLUDED:HARDWARE INCLUDED:
/