Noble House 294945 User guide

Brand: Noble House

Model: 294945

Type: User guide

This manual is also suitable for

294946

Noble House 294945 is a sturdy and stylish cast table, perfect for any home. With its simple assembly and adjustable levelers for stability, it's easy to set up and use. The cast table is made of durable materials, ensuring its longevity, and its classic design makes it a timeless piece that will complement any décor. Whether you need a table for dining, working, or entertaining, the Noble House 294945 is a great choice.

Noble House 294945 is a sturdy and stylish cast table, perfect for any home. With its simple assembly and adjustable levelers for stability, it's easy to set up and use. The cast table is made of durable materials, ensuring its longevity, and its classic design makes it a timeless piece that will complement any décor. Whether you need a table for dining, working, or entertaining, the Noble House 294945 is a great choice.

CAUTION : This table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Assembly Instructions

Caution : You must read this before you proceed.

CAST TABLE

1 OF 5

No. Picture Description Qty

A

Table Top 1

B

Leg Support Panels 4

C

Table Legs 4

No. Picture Description Qty

D

Studs(M8*40mm）

14

Washers ( 8mm ) 14

Springs Washers ( 8mm) 14

Nuts ( 8mm ) 14

J

Screwdriver 1

K

Spanner 1

E

Before Beginning Assembly:

2 OF 5

Place the Table Top(A) with the underside facing skywards.

Fit the Studs(D) by turning into the 4 points on the underside of Table Top(A) with the

Screwdriver(J).

DO NOT tighten, yet.

Step 3

Step 2

Step 1

Unpack and place all parts on a clean soft surface.

Note : It is recommended that you have a partner to assist in the assembly process.

Next, place and fit the four Table Legs (C) over the Studs previously fitted in Step 2 with

Washers, Spring Washers and Nuts((E) using the Spanner(K) .

DO NOT tighten, yet.

3 OF 5

Step 5

Turn the table right side up.

Adjust the pre-installed Levellers at the end of each table leg until the table is level with the

ground.

Securely, tighten and fasten all the screws and washer-nuts.

Your table is now ready for use.

Step 4

NOTE : To HOLD the legs together in positon, the LEGS SUPPORT PANELS WILL

OVERLAP AT ALL 04 (four) CORNERs.

Fit the Studs(D) into the Legs(C)with the Screwdriver(J).

First, put the Leg Support(B) mark 1# and then attach the other end mark 2# Support Panel,

together.

Then affix the Leg Support(B) to the table legs with the Washers, Spring Washers and

Nuts(E).

DO NOT tighten, yet

Repeat the same process for all 04 (four) contact points of the Table Legs and the Legs

Support Panels.

Once all the panels are in place, proceed to TIGHTEN the screw-bolts of the legs, in a

rotational sequential manner.

By this action, it allows the table legs to be locked into position, evenly, thus reducing

wobbles.

Thereafter, lock all the Leg Support Panels tightly into position.

(*Leg Support Panel has 02 wings.One wing is of a SLOPED wing and the other

DENTED wing.

The SLOPED wing is marked 1#. The DENTED wing is 2#. The Sloped Wing 1# is to be

on top and overlapped over the Dented 2# wing at assembly.)

4 OF 5

5 OF 5

1
2
3
4
5

Noble House 294945 User guide

Brand: Noble House

Model: 294945

Type: User guide

This manual is also suitable for

294946

Noble House 294945 is a sturdy and stylish cast table, perfect for any home. With its simple assembly and adjustable levelers for stability, it's easy to set up and use. The cast table is made of durable materials, ensuring its longevity, and its classic design makes it a timeless piece that will complement any décor. Whether you need a table for dining, working, or entertaining, the Noble House 294945 is a great choice.

Download PDF

Related papers

Other documents