Watts RadiantPEX-AL Compression Fittings User guide

Watts
Brand
Watts
Model
RadiantPEX-AL Compression Fittings
Type
User guide

Watts RadiantPEX-AL Compression Fittings provide a simple and reliable way to connect PEX-AL tubing in radiant heating and snowmelting applications. They are compatible with water and water/glycol solutions. No special tools are required for installation, just a wrench to tighten the nut. The double O-rings and brass compression ring ensure a leak-proof connection.

Here are some of the key features and benefits of Watts RadiantPEX-AL Compression Fittings:

  • Simple and reliable installation: No special tools are required, just a wrench to tighten the nut.
  • Leak-proof connections: The double O-rings and brass compression ring ensure a leak-proof connection.

Watts RadiantPEX-AL Compression Fittings provide a simple and reliable way to connect PEX-AL tubing in radiant heating and snowmelting applications. They are compatible with water and water/glycol solutions. No special tools are required for installation, just a wrench to tighten the nut. The double O-rings and brass compression ring ensure a leak-proof connection.

Here are some of the key features and benefits of Watts RadiantPEX-AL Compression Fittings:

  • Simple and reliable installation: No special tools are required, just a wrench to tighten the nut.
  • Leak-proof connections: The double O-rings and brass compression ring ensure a leak-proof connection.
COMPRESSION FITTINGS
No special tools required!
Simple and Reliable
The RadiantPEX-AL fitting system from Watts Radiant is as simple as it looks.
All you need is a wrench to tighten the nut. Double O-rings and a brass
compression ring insure a leak-proof connection. Made of solid brass, these
fittings are for long, trouble-free service.
RadiantPEX-AL Compression Fittings:
RadiantPEX-AL Brass Fitting Adapter, Male Sweat
RadiantPEX-AL Brass Sweat Adapter, Female Sweat
RadiantPEX-AL Brass MNPT Adapter
RadiantPEX-AL Adapter - Press x Male Thread
RadiantPEX-AL
Couplings
RadiantPEX-AL Brass Elbow - Compression x Male Sweat
RadiantPEX-AL Brass Elbow - Compression x Female Sweat
RadiantPEX-AL Brass Elbows - (Equal)
RadiantPEX-AL Brass Tees - (Equal)
RadiantPEX-AL
Brass
T
ees - (Unequal)
Notes: 1. All fittings come complete with compression nut and ring.
2.
R
adiantPEX-AL fittings are not listed for potable use.
RadiantPEX-AL Codes, Listings, and Standards:
RadiantPEX-AL Press fittings are manufactured in accordance with American Standard
T
esting Methods (ASTM) F-1281, and carry the UPC certification mark, as approved by the
International
Association of Plumbing and Mechanical Officials (IAPMO).
®
EPDM O-Rings
Brass
Compression Ring
Compression Nut
4500 E. Progress Place
Springfield, MO 65803
Installation Guidelines
USA and Canada: 800-276-2419
International: 417-864-6108
Fax: 417-864-8161
Web: www.wattsradiant.com
© 2006 Watts Radiant, Inc. Compression Fittings Product/Installation Sheet (RadiantPEX-AL)- Literature No. CFProd/Install 09.12.06
Product Overview
C
ompression fittings are designed to be
u
sed with RadiantPEX-AL in radiant heating
and snowmelting applications. The fittings
are compatible with water and water/glycol
solutions. No other tubing type may be used.
Fittings are available in a variety of
Compression x Sweat, Compression x NPT
or Compression x BSP connections.
Warnings:
•
When using sweat fittings, ensure
that all O-rings and insulator
inserts are removed prior to
soldering.
• If connections must be made in
temperatures lower than 30°F
(0°C), caution must be taken
to allow for a proper seal.
Connection Steps
Step 1:
Cut a clean, square end to the tubing.
Step 2:
Use the Reamer tool to shape and prep
the tubing.
Step 3:
Slide the compression nut over the tubing.
Step 4:
Slide the compression ring over the tubing.
Step 5:
Make sure the plastic insulator insert is in
place at the base of the fitting.
Step 6:
Slide the tubing over the fitting. Make sure
the tubing is sealed against the insulator insert
of the fitting.
Step 7:
Slide the compression nut up and begin
threading it onto the base. The compression
ring will automatically be positioned over
the fitting.
Step 8:
Use a box-end wrench to complete the
connection (Do not use a crescent wrench).
Tighten the connection until snug and then
an additional 1/4 turn.
Step 5:
Step 6:
Step 7:
Step 3:
Step 4:
Step 2:
Step 1:
Making RadiantPEX-AL Compression Connections
In the United Sta
tes:
W
a
tts R
adiant,
Inc
.
4500 Progress Place
Springfield, MO 65803
1-800-276-2419
toll-free
417-864-6108 phone
417-864-8161 fax
www
.wattsradiant.com
In Canada:
W
a
tts Industrie
s
–
Canada
5435 North Service Road
Burlington, ON L7L 5H7
1-888-208-8927
toll-free phone
905-332-4090 phone
1-888-882-1979 toll-free fax
905-332-7068 fax
www.wattscanada.ca
Insulator
insert
  • Page 1 1
  • Page 2 2

Watts RadiantPEX-AL Compression Fittings User guide

Watts
Brand
Watts
Model
RadiantPEX-AL Compression Fittings
Type
User guide

Watts RadiantPEX-AL Compression Fittings provide a simple and reliable way to connect PEX-AL tubing in radiant heating and snowmelting applications. They are compatible with water and water/glycol solutions. No special tools are required for installation, just a wrench to tighten the nut. The double O-rings and brass compression ring ensure a leak-proof connection.

Here are some of the key features and benefits of Watts RadiantPEX-AL Compression Fittings:

  • Simple and reliable installation: No special tools are required, just a wrench to tighten the nut.
  • Leak-proof connections: The double O-rings and brass compression ring ensure a leak-proof connection.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents