2. Glitzhome
  3. 2037800001
2037800001

Glitzhome 2037800001 User manual

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the Rain Chain 8.5FT. This document guides you through the process of setting up your rain chain, from unpacking to installation, and even custom length adjustments. I am ready to assist with any questions you might have about the assembly process or features.
  • What should I do before beginning assembly?
    What should I do if I need assistance with assembly or parts?
    Where is the best location to install the rain chain?



Get social with us and discover more about our products, tips and exclusive discounts!
Please carefully unpack and identify each component before beginning assembly.
Before you begin, please refer to parts list to make sure that you have all parts. Please take
care when assembling the unit and always place the parts on a clean, soft surface. If you
require assistance with assembly or parts, please call 888-357-7263.
ASSEMBLY INSTRUCTION
8.5FT RAIN CHAIN
A
B
STEP 1
Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
PARTS LIST
8.5ft Rain Chain (A)
Qty: 1
Gutter Clip (B)
Qty: 1
IT’S BEST TO CHOOSE A LOCATION WHERE RAIN CHAINS CAN LEAD TO LANDSCAPED AREAS, RAIN BARREL AND
WHERE OVERFLOW CAN BE DIVERTED FROM FOUNDATIONS.
ASSEMBLY INSTRUCTION
PRE-ASSEMBLY PREPARATION
• Please read through this instruction before beginning assembly.
• Installation may require some slight bending of gutter clip that can be easily
done by hand or with pliers.
• Please check for any loose links or chains and tighten them before use.
Assembly Instruction 1
B
STEP 2
Slide the Gutter Clip (B) into the rain gutter drain hole.
A
B
STEP 3
Hook Rain Chain (B) onto Gutter Clip (A). Wait for rain and enjoy!
Note: Use a filter screen to prevent leaves and debris from dropping into
your rain chain if needed.
Assembly Instruction
2
Assembly Instruction 3
STEP 4
You can adjust the length of the connector chain to suit your preference.
① Carefully open chain links
by hand or with pliers.
② Remove or add chains
as needed.
③ Make sure to close
the chains tightly.
②① ③



/