ITC 86400-4 Installation guide

86400-4
ITC
Brand
ITC
Model
86400-4
Type
Installation guide
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00083 • Rev D •11/22/22
1. Remove end caps from handle, determine installation
location, then mark screw holes and drill pilot holes.
PARTS/TOOLS NEEDED:
Assist Handle #8 Pan Head Screws
(Not Provided - recommended 2 per end caps)
Power Drill
(Not Provided)
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.
3. Align the end cap cover and snap into place.
INSTALLATION INSTRUCTIONS
Molded All-Weather
Assist Handle
Part#: 86400-4, 86400-6, 86400-18 & 86400-19
Page 1 of 1
2. Place handle over holes and install using stainless steel
screws (Not Provided).
  • Page 1 1

ITC 86400-4 Installation guide

86400-4
ITC
Brand
ITC
Model
86400-4
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents