Altronix GB1 Installation guide

Hello! I've reviewed the installation guide for the Altronix GB1 adapter plate. This document details how the adapter plate facilitates mounting the Genetec Synergis Cloud Link to various backplanes, using specific hardware and mounting procedures. I'm ready to answer your questions about its features, installation or any other aspect of this product.
What does the GB1 adapter plate do?

What material is the GB1 adapter plate made of?

What hardware is included with the GB1 adapter plate?

Overview:

Altronix GB1 adapter plate facilitates mounting the GenetecTM Synergis Cloud LinkTM to Trove Series HID/VertX or Mercury backplanes.

Specifications:

Installation Instructions:

1. Fasten standoffs (provided) to pems which match the hole pattern for GB1 plate (Fig. 1, pg. 1) on TM2 (Fig. 2, pg. 1), TV2 (Fig. 3, pg. 1)

and/or TMV2 (Fig. 4, pg. 2).

2. Affix GB1 to standoffs using 3/8” pan head screws (provided).

Hardware:

GB1

GenetecTM Cloud LinkTM Adapter Plate

Installation Guide

• Conveniently mounts to Altronix enclosures that accommodate

Power Distribution Modules.

• Accommodates one (1) Genetec Synergis Cloud Link.

• 16 AWG steel.

• Mounting hardware included

• Dimensions (L x W x D):

7.0” x 4.1875” x 0.375” (177.8mm x 106.4mm x 9.5mm).

Spacer | 5/16” Pan Head Screw

Fig. 1 - GB1 Adapter Plate

Fig. 2 - TM2 Altronix/Mecury Backplane Fig. 3 - TV2 Altronix/HID/VertX Backplane

Fig. 4 - TMV2 Mercury/HID/Vertx Door Backplane

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected]

IIGB1 - Rev. 072017 K29U MEMBER