ASRock Rack EP2C612D8HM Quick Installation Manual

Brand: ASRock Rack

Model: EP2C612D8HM

Type: Quick Installation Manual

EP2C612D8HM

Quick Installation Guide

www.asrockrack.com

P/N: 15G065060100AK V1.0

Install the Server Board

Motherboard Layout

Jumper Cap On/O

The server board User's Manual is available for download from the ASRock Rack's ofcial website

at http://www.asrockrack.com.

Take note of the following precautions before you install server board components or change any

server board settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the server board’s components due to static electricity, NEVER place your

server board directly on the carpet or the like. Also remember to use a grounded wrist strap or

touch a safety grounded object before you handle the components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag

that comes with the component.

5. When placing screws into the screw holes to secure the server board to the chassis, please do

not over-tighten the screws! Doing so may damage the server board.

Insert the server board into the chassis.

Aff ix the screws clockwise into the

mounting holes in all of the corners of

the server board.

Do not over-tighten the screws

When t he jumper cap is placed on the pins, the

jumper is “Short”. If no jumper cap is placed on the

pins, the jumper is “Open”.

The illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when a jumper cap is placed on

these 2 pins.

I/O Panel

System Panel Header

Auxiliary Panel Header

Headers

16.5cm (6.5 in)

47.2cm (18.6 in)

VGA1

USB 3.0

T: USB2

B: USB1

CMOS

Battery

RoH S

EP2C612D8HM

Intel

C612

DDR4_A1 (64 bit, 288-pin module, Blue)

DDR4_B1 (64 bit, 288-pin module, Blue)

DDR4_D1 (64 bit, 288-pin module, Blue)

DDR4_C1 (64 bit, 288-pin module, Blue)

MEZZ_1

IPMI_

LAN1

BMC

ROM

CPU_1

BMC_SMB_1

USB3_3_4

TPM1

PSU_SMB1

REAR_FAN2

IPMB1

HDLE D RESET

PLED P WRBTN

PANEL1

SPEAKER1

PSU_SMB_SEL_CLK1

PMBUS_SEL_DAT1

PMBUS_SEL_ALT1

PECI_SEL1

UID

REAR_FAN1

AUX_PANEL1

USB3_5

CPU1_FAN1

SATA_4

SATA_5

CON1

PCIE2

(Bl ue)

(Wh ite)

SATA_0_3

PCIE3

(Bl ue)

PCIE1

(Wh ite)

BIOS

ROM

NMI_BTN1

CHASSIS_ID0_1

CHASSIS_ID2_1

CHASSIS_ID1_1

ME_RECOVERY1

FRON_LED_LAN34

J100

DDR4_G1 (64 bit, 288-pin module, Blue)

DDR4_H1 (64 bit, 288-pin module, Blue)

DDR4_F1 (64 bit, 288-pin module, Blue)

DDR4_E1 (64 bit, 288-pin module, Blue)

PCIE4

CPU_2

CPU2_FAN1

CON21

(Wh ite)

No. Description No. Description

1 VGA Port (VGA1) 4 UID Switch (UID)

2 Serial Port (CON1) 5 USB 3.0 Ports (USB3_1_2)

3 LAN RJ-45 Port (IPMI_LAN1)

No. Description

1 System Panel Header (PANEL1)

2 PSU SMBus (PSU_SMB1)

Intelligent Platform Management Bus

header (IPMB1)

4 Rear Fan Connector (REAR_FAN2)

5 BMC SMBus Header (BMC_SMB_1)

6 Speaker Header (SPEAKER1)

7 PCI Express 3.0 x8 Slot (PCIE1, White)

PMBus Mode Jumper

(PMBUS_SEL_CLK1)

PMBus Mode Jumper

(PMBUS_SEL_DAT1)

PMBus Mode Jumper

(PMBUS_SEL_ALT1)

11 USB 3.0 Header (USB3_3_4)

12 Vertical Type A USB 3.0 (USB3_5)

13 CPU 1 Fan Connector (CPU1_FAN1)

14 PCI Express 3.0 x16 Slot (PCIE3, Blue)

LGA 2011 CPU Socket R3 (Narrow ILM)

(CPU_1)

2 x 288-pin DDR4 DIMM Slots

(DDR4_C1, DDR4_D1, Blue)

17 CPU PECI Mode Jumper (PECI_SEL1)

LGA 2011 CPU Socket R3 (Narrow ILM)

(CPU_2)

No. Description

2 x 288-pin DDR4 DIMM Slots

(DDR4_E1, DDR4_F1, Blue)

20 Interposer Board Connector (CON21)

21 CPU 2 Fan Connector (CPU2_FAN1)

2 x 288-pin DDR4 DIMM Slots

(DDR4_G1, DDR4_H1, Blue)

23 PCI Express 3.0 x16 Slot (PCIE4, White)

2 x 288-pin DDR4 DIMM Slots

(DDR4_A1, DDR4_B1, Blue)

25 Auxiliary Panel Header (AUX_PANEL1)

26 TPM Header (TPM1)

27 SATA3 Connector (SATA_5)

28 Mini SAS HD Connector (SATA_0_3)

29 SATA3 Connector (SATA_4)

30 Mezzanine Card Slot (MEZZ_1)

Front LAN LED Connector

(FRONT_LED_LAN34)

32 ME Recovery Jumper (ME_RECOVERY1)

33 Descriptor Security Override Jumper (J100)

34 Chassis ID2 Jumper (CHASSIS_ID2_1)

35 Chassis ID1 Jumper (CHASSIS_ID1_1)

36 Chassis ID0 Jumper (CHASSIS_ID0_1)

Non Maskable Interrupt Button

(NMI_ BTN1)

38 Rear Fan Connector (REAR_FAN1)

GND

SMB_CLK

SMB_Alert

CASEOPEN

SMB_DATA

+3VSB

LAN1_LINK

LED_PWR

LAN2_LINK

LED_PWR

+5VSB

GND

LOCATORLED1+

LOCATO RLED1-

LOCATORBTN#

System Fa ul t LED-

System Fa ul t LED+

GNDRESET#

PWRBTN#

PLED-

PLED+

GND

HDLED-

HDLED+

GND

*15G065060100AK*

EP2C612D8HM

Quick Installation Guide

www.asrockrack.com

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yellow 100M bps connection

On Link Green 1Gbps connection

9 LAN Port LED Indications

ACT/LINK LED

SPEED LED

LAN Port

Open the socket levers and the

CPU socket cover.

Install the processor and close

the socket cover.

Close the socket levers. Remove

the CPU protection cap.

Install the CPU Fan and Heatsink

Apply the thermal grease. Install the

CPU fan and heatsink and secure

the screws.

Connect the CPU fan to the CPU

FAN connector.

Install the Memory

IPMI LAN Port

Install the Processor

CPU_

FAN

1 CPU Conguration

CPU1

A1 B1 C1 D1

1 DIMM

2 DIMMS

# #

4 DIMMS

# # # #

*e # mark indicates the slot is populated.

2 CPU Conguration

CPU1 CPU2

A1 B1 C1 D1 E1 F1 G1 H1

1 DIMM

2 DIMMS

# #

4 DIMMS

# # # #

8 DIMMS

# # # # # # # #

Install the PCIE Card

Before installing an expansion card, please make sure that the power supply is switched o or the power

cord is unplugged. Please read the documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Remove the system unit cover (if your motherboard is already installed in a chassis)

Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Align the card connector with the slot and press rmly until the card is completely seated on the slot.

Fasten the card to the chassis with screws.

Replace the system cover.

Slot Generation Mechanical Electrical Source

PCIE 1 3.0 x8 x8 CPU1

PCIE 2 3.0 x8 x8 CPU2

PCIE 3 3.0 x16 x16 CPU1

PCIE 4 3.0 x16 x16 CPU2

Unlock a DIMM slot by pressing the module clips

outward.

Insert the memory module.

Lock the clips.

Unit Identication purpose LED/Switch

When the UID button on the front or rear panel is pressed, the front/

rear UID blue LED indicator will be truned on. Press the UID button

again to turn o the indicator.

CPU fan for narrow ILM socket

*Support an active or passive heatsink

We recommend using the CPU Installation tool to avoid CPU pin-bent problem.

ASRock Rack EP2C612D8HM Quick Installation Manual

ASRock Rack EP2C612D8HM Quick Installation Manual

ASRock Rack EP2C612D8HM Quick Installation Manual

Related papers

Other documents