ASRock Rack EP2C612D16C-4L Installation guide

Brand: ASRock Rack

Model: EP2C612D16C-4L

Type: Installation guide

EP2C612D16C-4L

Quick Installation Guide

www.asrockrack.com

No. Description No. Description

1 Serial Port (COM1) 6 USB 3.0 Ports (USB3_1_2)

2VGA Port (VGA1) 7 UID Switch (UID1)

3 GLAN RJ-45 Port (LAN2) 8 GLAN RJ-45 Port (LAN4)

4 GLAN RJ-45 Port (LAN1) 9 GLAN RJ-45 Port (LAN3)

5 LAN RJ-45 Port (IPMI_LAN)

P/N: 15G065032100AK V1.0

Install the Server Board

Motherboard Layout

Jumper Cap On/O

The server board User's Manual is available for download from the ASRock Rack's ofcial website

at http://www.asrockrack.com.

Take note of the following precautions before you install server board components or change any

server board settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the server board’s components due to static electricity, NEVER place your

server board directly on the carpet or the like. Also remember to use a grounded wrist strap or

touch a safety grounded object before you handle the components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag

that comes with the component.

5. When placing screws into the screw holes to secure the server board to the chassis, please do

not over-tighten the screws! Doing so may damage the server board.

1Insert the server board into the chassis.

2Affix the screws clockwise into the

mounting holes in all of the corners of

the server board.

Do not over-tighten the screws

When the jumper cap is placed on the pins, the

jumper is “Short”. If no jumper cap is placed on the

pins, the jumper is “Open”.

The illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when a jumper cap is placed on

these 2 pins.

I/O Panel

ATXPWR1

VGA1

COM1

PSU_SMB1

EP2C612D16C-4L

Intel

C612

BMC

ROM

DDR4_B2 (64 bit, 288-pin module,)White

DDR4_B1 (64 bit, 288-pin module, Blue)

DDR4_A2 (64 bit, 288-pin module, White)

DDR4_A1 (64 bit, 288-pin module,)Blue

DDR4_C1 (64 bit, 288-pin module, Blue)

DDR4_C2 (64 bit, 288-pin module,)White

DDR4_D1 (64 bit, 288-pin module, Blue)

DDR4_D2 (64 bit, 288-pin module,)White

RoHS

LAN2

FRNT_FAN2

FRNT_FAN1

CPU2

CPU1

DDR4_H2 (64 bit, 288-pin module,)White

DDR4_H1 (64 bit, 288-pin module, Blue)

DDR4_G2 (64 bit, 288-pin module,)White

DDR4_G1 (64 bit, 288-pin module, Blue)

DDR4_E1 (64 bit, 288-pin module, Blue)

DDR4_E2 (64 bit, 288-pin module, White)

DDR4_F1 (64 bit, 288-pin module, Blue)

DDR4_F2 (64 bit, 288-pin module, White)

LAN1

1 1

HDLED RESET

PLED PWRBTN

PANEL1

USB3_5

PCIE2

PCIE4

PCIE6

PCIE3

PCIE1

SATA_ 1

SATA_ 0

SATA_ 4

SATA_ 5

SATA_ 2

SATA_ 3

SSATA_1

SSATA_0

BATTERY1

567 8

SATA_SGPIO1

SATA_SGPIO2

SSATA_SGPIO1

CPU1_FAN1

ATX12V1

IPMB1

ATX12V2

(Blue)

(White)

M_SATA_0

M_SATA_1

SSATA_2

SSATA_3

FRNT_FAN4

SPEAKER1

ME_RECOVERY1

USB_1_2

USB3_3_4

AUX_PANEL1

TPM1

BMC_SMB2BMC_SMB1

NMI_BTN1

PECI1

CHASSIS_ID3

LED_LAN3_4

CHASSIS_ID1

PCIE_PWR1

FRNT_FAN3

12 3

REAR_FAN2

CPU2_FAN1

REAR_FAN1

3334353637383940424344454647

33.0cm (13.0 in)

30.5cm (12.0 in)

BIOS

64Mb

CHASSIS_ID2

BMC_SMB3

PMBUS_SEL_DAT1

PMBUS_SEL_ALT1

PMBUS_SEL_CLK1

BUZZER1

Dr.

Debug

T 1R

COM2

NUT1

NUT2NUT3NUT4

NUT5

IPMI_LAN

USB 3.0

T: USB1

B: USB2

LAN3

LAN4

UID

41484950515253

12 x 288-pin DDR4 DIMM Slots

(DDR4_G2, DDR4_H2, White)

22 x 288-pin DDR4 DIMM Slots

(DDR4_G1, DDR4_H1, Blue)

3 LGA 2011-3 CPU Socket (CPU2)

4 ATX 12V Power Connector (ATX12V2)

5Intelligent Platform Management Bus Header (IPMB1)

6PSU SMBus (PSU_SMB1)

7 PMBUS Mode Jumper (PMBUS_SEL_DAT1)

8 ATX Power Connector (ATXPWR1)

9 Front Fan Connector (FRNT_FAN2)

10 Front Fan Connector (FRNT_FAN1)

11 PMBUS Mode Jumper (PMBUS_SEL_ALT1)

12 ATX 12V Power Connector (ATX12V1)

13 PMBUS Mode Jumper (PMBUS_SEL_CLK1)

14 2 x 288-pin DDR4 DIMM Slots

(DDR4_A1, DDR4_B1, Blue)

15 2 x 288-pin DDR4 DIMM Slots

(DDR4_A2, DDR4_B2, White)

16 CPU1 Fan Connector (CPU1_FAN1)

17 LGA 2011-3 CPU Socket (CPU1)

18 2 x 288-pin DDR4 DIMM Slots

(DDR4_C2, DDR4_D2, White)

19 2 x 288-pin DDR4 DIMM Slots

(DDR4_C1, DDR4_D1, Blue)

20 Front Fan Connector (FRNT_FAN3)

21 Buzzer (BUZZER1)

22 SATA SGPIO Connector (SATA_SGPIO1)

23 SATA3 Connector (SATA_0), White

24 SATA3 Connector (SATA_1), White

25 SATA3 Connector (SATA_2), White

26 SATA3 Connector (SATA_3, White

27 SATA3 Connector (SATA_4), White

28 SATA3 Connector (SATA_5), White

29 SATA3 Connector (SSATA_0), White

30 SATA3 Connector (SSATA_1), White

31 SATA SGPIO Connector (SATA_SGPIO2)

32 Front Fan Connector (FRNT_FAN4)

33 SATA3 Connector (SSATA_2), White

34 SATA3 Connector (SSATA_3), White

35 SATA3 Connector (M_SATA_0), White

36 SATA3 Connector (M_SATA_1), White

37 ME Recovery Jumper (ME_RECOVERY1)

38 Speaker Header (SPEAKER1)

39 USB 2.0 Header (USB_1_2)

40 Vertical Type A USB 3.0 (USB3_5)

41 USB 3.0 Header (USB3_3_4)

42 SSATA SGPIO Connector (SSATA_SGPIO1)

43 System Panel Header (PANEL1)

44 Auxiliary Panel Header (AUX_PANEL1)

45 BMC SMBus Header (BMC_SMB1)

46 TPM Header (TPM1)

47 BMC SMBus Header (BMC_SMB3)

48 BMC SMBus Header (BMC_SMB2)

49 Non Maskable Interrupt Button (NMI_BTN1)

50 CPU PECI Mode Jumper (PECI1)

51 ermal Sensor Header (TR1)

52 Front LAN LED Connector (LED_LAN3_4)

53 COM Port Header (COM2)

54 Chassis ID1 Jumper (CHASSIS_ID1)

55 Chassis ID3 Jumper (CHASSIS_ID3)

56 Chassis ID2 Jumper (CHASSIS_ID2)

57 PCIE Power Connector (PCIE_PWR1)

58 2 x 288-pin DDR4 DIMM Slots

(DDR4_E1, DDR4_F1, Blue)

59 2 x 288-pin DDR4 DIMM Slots

(DDR4_E2, DDR4_F2, White)

60 Rear Fan Connector (REAR_FAN2)

61 Rear Fan Connector (REAR_FAN1)

62 CPU 2 Fan Connector (CPU2_FAN1)

3 5

*15G065032100AK*

EP2C612D16C-4L

Quick Installation Guide

www.asrockrack.com

Activity / Link LED Speed LED

Status Description Status Description

O No Link O No Link

Blinking Yellow Data Activity O 10M bps connection

On Link Yellow 100M bps connection

Green 1G bps connection

8LAN Port LED Indications

123

Open the socket levers and the

CPU socket cover.

Install the processor and close

the socket cover.

Close the socket levers. Remove

the CPU protection cap.

Install the CPU Fan and Heatsink

CPU_FAN

Apply the thermal grease. Install the

CPU fan and heatsink and secure

the screws.

Connect the CPU fan to the CPU

FAN connector.

Install the Power Cables

IPMI Port

LAN Port

System Panel Auxiliary Panel

Install the Processor

GND

RESET#

PWRBTN#

PLED-

PLED+

GND

HDLED-

HDLED+

GND

ACT/LINK LED

SPEED LED

LAN Port

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description

O No Link O No Link

Blinking Yellow Data Activity O 10M bps connection

On Link Yellow 100M bps connection

Green 1G bps connection

GND

SMB_CLK

SMB_Alert

CASEOPEN#

SMB_DATA

+3VSB

LAN1_LINK

LED_PWR

LAN2_LINK

LED_PWR

+5VSB

GND

LOCATORLED1+

LOCATORLED1-

LOCATORBTN#

System Fault LED+

System Fault LED-

GND

PWROK_PS

5VSB

12V

121

13 24

-12V

GND

PSON#

GND

N/A

+12V2

GND

11 Install the Memory

123

Unlock a DIMM slot by

pressing the module clip

outward.

Insert the memory module. Lock the clip.

10 Install the PCIE Card

1Remove the bracket facing the slot that

you intend to use. Keep the screw for

later use.

2Align the card connector with t he

slot and press firmly until the card is

completely seated on the slot.

Fasten the card to the chassis with the

screw.

12 Headers

Dr. Debug

Code Description

00 Please check if the CPU is installed correctly and then clear CMOS.

0d Problem related to memory, VGA card or other devices. Please clear CMOS, re-install the memo-

ry and VGA card, and remove other USB, PCI devices.

01 - 54

(except 0d),

5A- 60

Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the

problem still exists, please install only one memory module or try using other memory modules.

55 e Memory could not be detected. Please re-install the memory and CPU. If the problem still

exists, please install only one memory module or try using other memory modules.

61 - 91 Chipset initialization error. Please press reset or clear CMOS.

92 - 99 Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other

slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.

A0 - A7 Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem

still exists, please clear CMOS and try removing all SATA devices.

b0 Problem related to memory. Please re-install the CPU and memory. If the problem still exists,

please install only one memory module or try using other memory modules.

b4 Problem related to USB devices. Please try removing all USB devices.

b7 Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the

problem still exists, please install only one memory module or try using other memory modules.

d6 e VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the

problem still exists, please try installing the VGA card in other slots or use other VGA cards.

d7 e Keyboard and mouse could not be recognized. Please try re-installing the keyboard and

mouse.

d8 Invalid Password.

FF Please check if the CPU is installed correctly and then clear CMOS.

CPU fan for narrow ILM socket

*Support an active or passive heatsink

We recommend using the CPU Installation tool to avoid CPU pin-bent problem.

ASRock Rack EP2C612D16C-4L Installation guide

ASRock Rack EP2C612D16C-4L Installation guide

ASRock Rack EP2C612D16C-4L Installation guide

Related papers

Other documents