ASRock Rack EP2C612D16FM-N Quick Installation Manual

Type
Quick Installation Manual

This manual is also suitable for

ASRock Rack EP2C612D16FM-N is a server board designed for high-performance computing and data-intensive applications. It supports dual Intel Xeon processors and up to 16 DDR4 DIMMs, providing exceptional processing power and memory capacity. With multiple expansion slots, including PCIe Gen3 x16 and M.2, it offers flexible configuration options for networking, storage, and graphics cards. The board also features IPMI 2.0 for remote management and BMC ROM for system health monitoring.

ASRock Rack EP2C612D16FM-N is a server board designed for high-performance computing and data-intensive applications. It supports dual Intel Xeon processors and up to 16 DDR4 DIMMs, providing exceptional processing power and memory capacity. With multiple expansion slots, including PCIe Gen3 x16 and M.2, it offers flexible configuration options for networking, storage, and graphics cards. The board also features IPMI 2.0 for remote management and BMC ROM for system health monitoring.

EP2C612D16FM / EP2C612D16FM-N
Quick Installation Guide
www.asrockrack.com
No. Description No. Description
1 USB 2.0 Ports (USB_1_2) 5 LAN RJ-45 Port (LAN1)
2 Serial Port (COM1) 6 LAN RJ-45 Port (LAN2)
3 VGA Port (VGA1) 7 LAN RJ-45 Port (IPMI_LAN)
4 UID Switch (UID) 8 USB 3.0 Ports (USB3_1_2)
4
2
P/N: 15G065016100AK V1.0
Install the Server Board
Motherboard Layout
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's of cial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1
Insert the server board into the chassis.
2
Af f ix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1
and pin2 are “Short” when a jumper cap is placed on
these 2 pins.
I/O Panel
26.7cm (10.5 in)
30.5cm (12.0 in)
ATXPWR1
12
1
VGA1
COM1
Top:
IPMI_LAN
USB 3.0
T: USB2
B: USB1
DDR4_H2 (64 bit, 288-pin module, White)
DDR4_H1 (64 bit, 288-pin module, Blue)
DDR4_G2 (64 bit, 288-pin module, White)
DDR4_G1 (64 bit, 288-pin module, Blue)
1
PSU_SMB1
1
EP2C612D16FM
Intel
C612
64Mb
BIOS
BMC
ROM
DDR4_E1 (64 bit, 288-pin module, Blue)
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_F2 (64 bit, 288-pin module, White)
DDR4_A1 (64 bit, 288-pin module, Blue)
DDR4_A2 (64 bit, 288-pin module ), White
DDR4_B1 (64 bit, 288-pin module ), Blue
DDR4_B2 (64 bit, 288-pin module ), White
DDR4_D2 (64 bit, 288-pin module, White)
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_C1 (64 bit, 288-pin module, Blue)
RoHS
LAN1
LAN2
CMOS
Battery
MEZZ_MB2
IPMB_1
BMC_SMB_1
1
1
ATX 12V3
REAR_FAN1
REAR_FAN2
CPU2_FAN1
FRNT_FAN1
1
1
11
ATX 12V2
AUX_PANEL1
PANEL1
SPEAKER1
TPM1
USB_3_4
CON3 0
CON3 1
CON2 8
CON2 9
34 5
6
7
8
10
11
13
16
18
19212223
24
25
26
27
29
30
31
35
37
38
39
40
UID
1
ME_RECOVERY1
20
USB3 TYPE A
28
32
33
9
12
1
SATA_SGPIO2
34
CPU2
CPU1
CPU1_FAN1
FRNT_FAN2
1
PECI1
1
USB3_3_4
1
USB 2.0
T: USB2
B: USB1
1
1
FRONT_LED_LAN34
SATA0-3
sSATA0-3
NMI_BTN1
SATA4
SATA5
M_SATA_0
M_SATA_1
Chassis ID1
Chassis ID0
14
15
17
36
46
41
42
43
44
45
Super
I/O
1
1
1
1
1
47
48
49
50
51
Chassis ID2
NCSI_SEL1
PMBUS_SEL_ALT1
PMBUS_SEL_CLK1
PMBUS_SEL_DAT1
No. Description
1
Intelligent Platform Management Bus header
(IPMB_1)
2 ATX Power Connector (ATXPWR1)
3 Rear Fan Connector (REAR_FAN1)
4
2 x 288-pin DDR4 DIMM Slots (DDR4_H1, DDR4_
G1, Blue)
5
2 x 288-pin DDR4 DIMM Slots (DDR4_H2, DDR4_
G2, White)
6 Front Fan Connector (FRONT_FAN1)
7 CPU 2 Fan Connector (CPU2_FAN1)
8 PCIE Switch Board Connector (CON30) (CPU2)*
9 LGA 2011 CPU Socket (CPU2)
10 PCIE Switch Board Connector (CON31) (CPU2)*
11 PCIE Switch Board Connector (CON28) (CPU1)*
12 LGA 2011 CPU Socket (CPU1)
13 PCIE Switch Board Connector (CON29)(CPU1)*
14 CPU 1 Fan Connector (CPU1_FAN1)
15 Front Fan Connector (FRONT_FAN2)
16 CPU PECI Jumper (PECI1)
17
2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_
B2, White)
18
2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_
B1, Blue)
19 SATA3 Connector (M_SATA_1), White
20 System Panel Header (PANEL1)
21 Auxiliary Panel Header (AUX_PANEL1)
22 Speaker Header (SPEAKER1)
23 TPM Header (TPM1)
24
Front Lan LED Connector (FRNT_LAN34)(For Mez-
zanine Card)
25 ME Recovery Jumper (ME_RECOVERY1)
26 Non Maskable Interrupt Button (NMI_BTN1)
27 SATA3 Connector (M_SATA_0), White
28 SATA3 Connector (SATA5), White
29 SATA3 Connector (SATA4), White
30 Vertical Type A USB 3.0 (USB3_5)
31 USB 2.0 Header (USB_3_4)
32 mini SAS Connector (SATA0-3)
33 mini SAS Connector (sSATA0-3)
*For EP2C612D16FM only
6
5
3
2
4
1
7
8
*15G065016100AK*
3
EP2C612D16FM / EP2C612D16FM-N
Quick Installation Guide
www.asrockrack.com
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M/100Mbps
connection or no link
Blinking
Yel low
Data Activity Green 1Gbps connection
On Link
8 LAN Port LED Indications
Recommended Memory Congurations
5
7
11
6
1
2
3
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
CPU_
FAN
1
2
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Memory
Install the Power Cables
1
2
3
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
10
Screw Holes
IPMI LAN Port
1G LAN Port
System Panel Auxiliary Panel
12 Headers
9
A
B
A
B
A
B
A
B
B
A
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity (100Mbps) Orange 100Mbps connection
On Link Green 1Gbps connection
Install the Processor
ACT/LINK LED
SPEED LED
LAN Port
ACT/LINK LED
SPEED LED
LAN Port
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
GND
SMB_ CLK
SMB_ Ale rt
CASE OPE N
1
SMB_ DAT A
+3VS B
LAN1 _LI NK
LED_ PWR
LAN2 _LI NK
LED_ PWR
+5VS B
GND
GND
LOCATORLE D1+
LOCATORLE D1-
LOCATORBT N#
Syst em Fa ult LED-
A
B
C
D
Syst em Fa ult LED+
E
1
3V
3V
GND
GND
5V
5V
GND
PWROK_PS
5VSB
12V
12V
3V
3V
-12V
GND
PSON#
GND
GND
GND
5V
5V
5V
GND
N/A
12
24 13
4
8
1
5
+12V2
GND
1 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS # #
4 DIMMS # # # #
8 DIMMS # # # # # # # #
2 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS # #
4 DIMMS # # # #
8 DIMMS # # # #
12 DIMMS # # # # # # # #
16 DIMMS # # # # # # # #
CPU2
E1 E2 F1 F2 G1 G2 H1 H2
1 DIMM
2 DIMMS
4 DIMMS
8 DIMMS # # # #
12 DIMMS # # # #
16 DIMMS # # # # # # # #
CPU1
CPU2
DDR4-_A1
DDR4_A2
DDR4_B1
DDR4_B2
DDR4_D2
DDR4_D1
DDR4_C2
DDR4_C1
DDR4_E1
DDR4_E2
DDR4_F1
DDR4_F2
DDR4_H2
DDR4_H1
DDR4_G2
DDR4_G1
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
Rear I/O
Intel
C612
Remove the standoffs
from the chassis
  • Page 1 1
  • Page 2 2

ASRock Rack EP2C612D16FM-N Quick Installation Manual

Type
Quick Installation Manual
This manual is also suitable for

ASRock Rack EP2C612D16FM-N is a server board designed for high-performance computing and data-intensive applications. It supports dual Intel Xeon processors and up to 16 DDR4 DIMMs, providing exceptional processing power and memory capacity. With multiple expansion slots, including PCIe Gen3 x16 and M.2, it offers flexible configuration options for networking, storage, and graphics cards. The board also features IPMI 2.0 for remote management and BMC ROM for system health monitoring.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI