2. Vango
  3. Zeya DLX 500 Front canopy

Vango Zeya DLX 500 Front canopy Pitching Instructions

  • Hello! I've reviewed the pitching instructions for the Vango Zeya DLX 500 Front Canopy. This document provides a step-by-step guide on setting up the canopy, including pole assembly, attachment, and securing it to your tent. I'm ready to assist you with any questions you might have about the setup process or the canopy's features.
  • Where should the open end of the canopy be positioned?
    How do you secure the canopy to the tent?
    What type of campsites is the canopy designed for?
IF YOU HAVE ANY PROBLEMS PLEASE CONTACT YOUR LOCAL RETAILER or
AMG Group Ltd., Kelburn Business Park, Port Glasgow, Scotland. PA14 6TD.
UK Consumer Hotline: 0844 811 0535 E-Mail: [email protected].uk
Calls to our Customer Hotline cost 5p per minute. Calls from mobile phones, cable networks or public payphones will generally cost more.
Pitching Instructions
Assemble the poles and insert into pole sleeves.
Locate one end of the poles in Ring & Pin system as Figure 1 below.
Push poles into an arch from opposite side and locate other pole end on to
corresponding Ring & Pin system on flysheet.
Tension the webbing strap at the pole end.
Position open end of canopy towards tent front door.
Secure in position by zipping canopy onto corresponding zip at front of tent and
clipping the rear canopy clips onto the front tent pole.
Peg out canopy base at contact point with tent and then front of canopy to tension
material.
Secure in position by pegging out front guy lines.
Peg out ALL remaining peg points as figure 2.
The Vango Zeya DLX Front Canopy is designed for use in lowland sheltered campsites.
Do not pitch in high winds or exposed campsites.
Figure 1.
Figure 2.
Pitching Instructions – Zeya DLX 500 Front Canopy
/