Accessory Power Koala Pal User manual

Brand: Accessory Power

Model: Koala Pal

Type: User manual

Accessory Power Koala Pal is a compact, portable speaker system that is a fun and unique pairing for your laptop, iPhone®, iPod®, iPad®, MP3 player, smartphone or other audio device. You’ll be surprised just how much this little Koala rocks! This speaker is powered by USB or 3 AAA batteries, so you can take it with you wherever you go without worrying about running out of power. The Koala Pal has a standard 3.5mm headphone plug, so it is easy to connect to any of your devices. The 2 x 1W RMS speakers and 1.

INSTRUCTION MANUAL

KO AL A

PA L

Thank you

for purchasing the GOgroove™ Koala Pal.

This compact, portable speaker system is a

fun and unique pairing for your laptop, iP-

hone®, iPod®, iPad®, MP3 player, smartphone

or other audio device. You’ll be surprised just

how much this little Koala rocks!

Koalas are famous and loved worldwide

as Australia’s cute and cuddly icon of the

bush. However, their survival is threatened

by habitat loss, dog attack, bush  re and

disease.

The Australian Koala Foundation is the pre-

mier not for pro t organization dedicated

to saving the wild koala and its habitat, but

with numbers rapidly approaching unsus-

tainable levels, their situation is now critical.

Adopt your own koala, plant a food tree

or see other ways to help the Koala at

www.savethekoala.com.

Please join Accessory Power™

in supporting the Australian

Koala Foundation

KO AL A

PA L

Product Diagram

What’s in the box?

- Koala Pal™ Speaker

- USB power cable

fig. 1

fig. 2

1- Volume control

2- 3.5mm audio cable

3- USB power port

4- ON/OFF switch

5- AAA battery compartment

6- Power LED

You can power the GOgroove™ Koala Pal™ using USB or AAA batteries.

For USB power, connect the smaller end of USB power cable to the (3) USB power

port on the back of Koala Pal ( g. 2). Next, connect the large end of the USB

power cable to the USB port of your computer. Make sure the (4) ON/OFF switch on

the bottom of Koala Pal is switched to the ON position. The (6) Power LED on the

front of Koala Pal will glow blue when power is being supplied. Now just connect

the Koala Pal’s (2) 3.5mm audio cable to the headphone port on your device and

you are ready for music! Refer to the setup diagram below ( g. 3). For volume

adjustment, you can use Koala Pal’s (1) Volume control and your device’s volume

adjustment setting.

***Note: If you do not want to connect Koala Pal to USB power, you can use 3

AAA batteries for power while listening to laptop/computer music. In this case,

you only need to connect Koala Pal’s (2) 3.5mm audio cable to your computer’s

headphone port.

Operating Instructions:

Listening to Music from a Laptop/Computer:

USB power cable

3.5 mm audio cable

fig. 3

Listening to Music from an MP3 player, iPod®, iPhone®, cell

phone or other device:

For power, please insert 3 AAA batteries into the (5) AAA battery compartment

located on the bottom of Koala Pal ( g. 2). Make sure the (4) ON/OFF switch on

the bottom of Koala Pal is switched to the ON position. The (6) Power LED on the

front of Koala Pal will glow blue when power is being supplied. Now, just connect

the Koala Pal’s (2) 3.5mm audio cord to the headphone port on your device and

you are ready for music! Refer to the setup diagram below ( g. 4). For volume

adjustment, you can use Koala Pal’s (1) Volume control and your device’s volume

adjustment setting.

3.5mm audio cable

audio device

fig. 4

If you are having trouble playing music, please make sure you have done

the following:

- Connect the Koala Pal to a power source: You will know that Koala Pal is

receiving power because the (6) Power LED will glow blue. If it is not glowing

blue, please make sure that it is either connected to a USB power port or that

you have properly inserted 3 working AAA batteries. Make sure the (4) ON/OFF

switch on the bottom of Koala Pal is switched to the ON position.

- Connect Koala Pal to an audio source: Please make sure that the (2) 3.5mm

audio cable is fully inserted into your audio device or computer. Next, make sure

that the device you are using as the audio source is properly playing music and

that your device’s volume setting is turned up.

- Adjust Koala Pal’s volume setting: Make sure that Koala Pal’s volume

setting is turned up by adjusting the (1) Volume control.

- Keep in a safe place free from dust, liquid and extreme temperatures

- Only use this device with the recommended power sources

- Keep out of reach of small children

- When not in use, please disconnect batteries or power sources

Troubleshooting

Cautions

Product Speci cations

Dimensions: 3.7 x 3.7 x 2.75 inches (9.4 x 9.4 x 7 cm)

Speakers: 2 x 1W RMS

Drivers: 1.5 inch x 2 high excursion drivers

Audio Input: Standard 3.5mm headphone plug

Power: USB 5 volt, or 3 AAA batteries not included

2011 ACCESSORY POWER

All trademarks and brand names are the property of their owners.

iPhone® and iPod® are trademarks of Apple, Inc.

registered in the U.S. and other countries.

Accessory Power Koala Pal User manual

Brand: Accessory Power

Model: Koala Pal

Type: User manual

Download PDF

report

in other languages

eesti: Accessory Power Koala Pal Kasutusjuhend

Accessory Power Koala Pal User manual

Accessory Power Koala Pal User manual

in other languages

Related papers

Other documents