2. Malco
  3. FCSR

Malco FCSR, Fiber Cement Siding Snip Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Malco FCSR Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Cutting Circular patterns
Snip should be held with the blades at an angle to the fiber cement plank to allow it the maneuverability required to cut arcs and circles.
Also See figure (B).
Cutting Straight Lines
The lower jaws of the Fiber Cement Snip should be flush with the bottom of the fiber cement plank while cutting straight lines.
Also See figure (A).
SL12426
FCS - Fiber Cement Snip Instruction Sheet
(A)
(B)
/