Panasonic TYWK32LX20W User manual

Applique de fixation au mur du téléviseur à cristaux liquides

Manuel d’installation

Nous vous remercions d’avoir acquis l’applique de suspension au mur

pour les téléviseur à écran à cristaux liquides Panasonic.

• Veuillez effectuer l’installation avec soin après avoir soigneusement lu le manuel

et le mode d’emploi du téléviseur à cristaux liquides.

• Lorsque l’installation est terminée, veuillez remettre ce manuel au client pour

qu’il puisse en prendre connaissance et qu’il le conserve pour référence.

(Ce manuel peut être nécessaire pour effectuer une réparation, ou encore pour déplacer

l’appareil.)

• Conservez toutes les pièces que vous avez retirées. Ces pièces peuvent être

requises pour remettre l’appareil en son état original.

TY-WK32LX20W

Model No.

Wall hanging bracket for LCD TV

Installation Manual

Thank you very much for purchasing the wall hanging bracket for the

Panasonic LCD TV.

• Please perform installation work correctly after carefully reading this installation

manual and the operation manual for the LCD TV.

• After installation work is complete, please give this installation manual to the

customer so they can read it and keep for future reference. (It may be needed

for maintenance or when moving.)

• Retain all removed parts. They may become necessary when returning to the

original installation condition.

English

Deutsch

Français

Italiano

Español

Wandhalterung zum Anbringen des LCD-Fernsehers

Installationsanleitung

Vielen Dank für den Kauf der Wandhalterung zum Anbringen des LCD-

Fernsehers von Panasonic.

• Lesen Sie bitte vor der Installation diese Anleitung und die Bedienungsanleitung

für den LCD-Fernseher sorgfältig durch, damit die Anbringung richtig ausgeführt

wird.

• Geben Sie bitte diese Installationsanleitung nach Beendigung der Installation

dem Kunden, damit der sie als zukünftige Referenz aufbewahren kann. (Die

Anleitung kann für Wartungszwecke oder bei einem Umzug benötigt werden.)

• Heben Sie alle entfernten Bauteile auf. Sie können notwendig werden, wenn

die ursprüngliche Installation wieder ausgeführt werden soll.

Supporto per il montaggio a parete del televisore a cristalli liquidi

Manuale di installazione

Grazie per aver acquistato il supporto per il montaggio a parete del

televisore a cristalli liquidi Panasonic.

• Prima di effettuare le operazioni di installazione, leggere questo manuale e il

manuale del televisore a cristalli liquidi.

• Al termine dell’installazione, fornire questo manuale al cliente il quale lo

conserverà per riferimenti futuri (potrebbe essere necessario per effettuare

operazioni di manutenzione o spostare eventualmente il supporto).

• Conservare tutte le parti rimovibili in quanto potrebbero essere necessarie per

ripristinare le condizioni di installazione originali.

Soporte para colgar en pared un televisor LCD

Manual de instalación

Muchas gracias por haber adquirido el soporte para colgar en una pared

el televisor LCD de Panasonic.

• Haga correctamente el trabajo de instalación después de leer cuidadosamente

este manual de instalación y el manual de instrucciones del televisor LCD.

•

Después de finalizar el trabajo de instalación, entregue este manual de instalación al cliente

para que lo lea y luego lo guarde por si necesita consultarlo en el futuro. (Este manual

puede resultar necesario para realizar trabajos de mantenimiento o para cuando se cambie

el lugar de instalación.)

• Guarde todas las piezas que quite. Éstas pueden ser necesarias para volver a

la condición de instalación original.

TQZH519-2

2

Caution:

This bracket intended for use only Panasonic LCD TV Model TX-32LX500 / TC-32LX500 / TX-26LX500

/ TC-26LX500 / TX-32LX50 / TC-32LX50 / TX-26LX50 / TC-26LX50 / TC-32LX300 / TX-32LX1 / TX-

32LXD1 / TC-32LX20 / TC-32LX1 / TX-26LX1 / TX-26LXD1 / TC-26LX20 / TC-26LX1 Series and TX-

32LXD500 / TX-26LX500 / TX-32LXD50 / TX-32LXD40 / TX-32LXD55F / TX-26LD50.

Use with other apparatus is capable of resulting in instability causing possible injury.

Vorsicht:

Diese Halterung ist nur für die Verwendung mit LCD-Fernsehern der Modellserie TX-32LX500 / TC-

32LX500 / TX-26LX500 / TC-26LX500 / TX-32LX50 / TC-32LX50 / TX-26LX50 / TC-26LX50 / TC-

32LX300 / TX-32LX1 / TX-32LXD1 / TC-32LX20 / TC-32LX1 / TX-26LX1 / TX-26LXD1 / TC-26LX20 / TC-

26LX1 und TX-32LXD500 / TX-26LX500 / TX-32LXD50 / TX-32LXD40 / TX-32LXD55F / TX-26LD50.

von Panasonic vorgesehen. Die Verwendung mit anderen Geräten kann zu Instabilität führen und

Verletzungen zur Folge haben.

Attention:

L’applique a été conçue spécifiquement pour les téléviseur à écran à cristaux liquides de la séries TX-

32LX500 / TC-32LX500 / TX-26LX500 / TC-26LX500 / TX-32LX50 / TC-32LX50 / TX-26LX50 / TC-

26LX50 / TC-32LX300 / TX-32LX1 / TX-32LXD1 / TC-32LX20 / TC-32LX1 / TX-26LX1 / TX-26LXD1 / TC-

26LX20 / TC-26LX1 et la séries TX-32LXD500 / TX-26LX500 / TX-32LXD50 / TX-32LXD40 / TX-32LXD55F

/ TX-26LD50.

Utilisée avec un autre appareil, elle peut se révéler tout à fait inappropriée et être la cause indirecte de

blessures.

Attenzione:

Questo supporto è progettato per essere utilizzato esclusivamente con il modello di televisore a cristalli

liquidi Panasonic della serie TX-32LX500 / TC-32LX500 / TX-26LX500 / TC-26LX500 / TX-32LX50 / TC-

32LX50 / TX-26LX50 / TC-26LX50 / TC-32LX300 / TX-32LX1 / TX-32LXD1 / TC-32LX20 / TC-32LX1 /

TX-26LX1 / TX-26LXD1 / TC-26LX20 / TC-26LX1 e della serie TX-32LXD500 / TX-26LX500 / TX-32LXD50

/ TX-32LXD40 / TX-32LXD55F / TX-26LD50. L’uso con altri apparecchi potrebbe provocare instabilità ed

eventuali lesioni personali.

Aviso:

Este soporte ha sido pensado para ser utilizado solamente con los modelos de televisor LCD Panasonic

de las series siguientes: TX-32LX500 / TC-32LX500 / TX-26LX500 / TC-26LX500 / TX-32LX50 / TC-

32LX50 / TX-26LX50 / TC-26LX50 / TC-32LX300 / TX-32LX1 / TX-32LXD1 / TC-32LX20 / TC-32LX1 /

TX-26LX1 / TX-26LXD1 / TC-26LX20 / TC-26LX1 y TX-32LXD500 / TX-26LX500 / TX-32LXD50 / TX-

32LXD40 / TX-32LXD55F / TX-26LD50. Si se utiliza con otros aparatos, la instalación no será estable y

algunas personas podrían sufrir heridas.

English

Deutsch

Français

Italiano

Español

Page is loading ...

4

Safety precautions

Always follow these precautions

To prevent injury to the user and others and to prevent damage to property, directions that must be followed are

explained as shown below.

The following displays categorize the degree of danger when mishandled.

Possibility of injury or damage to surrounding property.

WARNING

This symbol indicates that the direction must be followed with caution.

CAUTION

Possibility of serious injury and even death when mishandled.

Directions that must be followed are explained using the following symbols.

(Examples of graphical symbols are shown below.)

This symbol indicates that the direction is prohibited.

This symbol indicates that the direction must always be followed.

Be aware of safety factors concerning the

mounting strength.

Insufficient strength may cause the LCD TV

to fall, resulting in bodily injury.

Do not hang from the LCD TV, place

stepsladder, etc.

The LCD TV may become damaged or it may

fall, causing bodily injury.

Installation to be performed by certified

personnel only.

Inadequate installation may cause the LCD

TV to fall, resulting in bodily injury.

Do not install where tolerance is weak.

If the tolerance of the mounting location is

weak, the LCD TV may fall resulting in bodily

injury.

When expanding connection equipment, be

sure to prevent lock release.

This may cause injury.

WARNING

Do not install with the LCD TV facing

downward, on its side, or upside down.

Heat may build up within the LCD TV, causing

fire as a result.

Ensure there is a space of at least 5 cm

between the LCD TV body and other objects

at the top, bottom and sides, and at least 4

cm at the back.

Vent holes are located on the rear of the LCD

TV. Blocking these holes may result in fire.

Do not install in humid or dusty areas, or

where the LCD TV may be exposed to

lampblack, steam or heat.

This may affect the LCD TV, and may cause

fire or electric shock.

At least two persons should perform

installation and removal of the LCD TV unit.

Dropping the LCD TV may result in injury.

Always remove the wall hanging bracket

when removing the LCD TV.

Injury may result when accidentally hitting the

projected parts.

• Take caution when removing for repairs, etc.

Make sure there is sufficient air circulation

so that the ambient temperature does not

exceed 35

°C.

Heat may build up within the LCD TV, causing

fire as a result.

CAUTION

Prohibited

English

5

Components

Precautions for wall hanging bracket fitting

The wall hanging bracket is for use in attaching a LCD TV unit to a vertical wall for viewing. Do not fit to any surface

other than a vertical wall.

There is a lock mechanism on the left side of the unit, so keep a space of at least 300 mm (11 13/16 inches)

between the LCD TV and the nearest wall.

To ensure correct LCD TV performance and prevent trouble, do not fit at any of the following locations.

• Near sprinklers or fire/smoke detectors

• Where there is a risk of exposure to vibration or impact

• Near high-voltage wires or dynamic power supplies

• Locations exposed to air blown from heating equipment

Fit using techniques suited to the structure and materials of the fitting location.

Use commercially available M6 screws suited to the wall surface material (wood, steel frame, concrete etc.) for

fitting the bracket to the wall.

Fit so there is no contact between the attachment screws or power cord and any metal inside the wall.

For the TV power supply plug, use a power supply outlet that can be reached easily.

Ensure good air flow so that the equipment ambient temperature does not exceed 40˚C. Failure to do this may

cause heat to build up inside the LCD TV, resulting in malfunction.

Requests regarding handling

1) Exercise care when selecting the location for the TV because it may discolor or deform due to light or heat if it is

placed where it is exposed to direct sunlight, or near a heater.

2) Upkeep

Wipe with a dry cloth. If the unit is extremely soiled, first wipe off soiling with a neutral detergent diluted in water,

and then wipe with a dry cloth. Do not use cleaners such as benzene, thinner or furniture wax because they may

cause paint peeling. (If using a chemical wiping cloth, follow any precautions included.)

3) Do not affix adhesive tape or stickers. Doing so may dirty the surface of the wall mounting bracket.

Wall hanging bracket ..................... × 1 Cover stickers ........................... × 2

Insulation spacers ..................... × 4

Dished toothed washers............ × 4

Allen wrench (included tool) ...... × 1

Allen head countersunk screws

(M4-18)...................................... × 4

TY-WK32LX20W

Wall hanging bracket (Vertical mounting type)

Unit fastening screws

( + M5-35) ................................. × 2

English

6

120

(4 47/64)

121

(4 49/64)

325 (12 51/64)

C

B

280 (11 1/64)

23 (29/32)

480 (18 57/64)

A

440 (17 21/64)

23

(29/32)

176 (6 59/64) 163 (6 27/64)

118

(4 41/64)

216 (8 1/2)

89.5

(3 17/32)

Fitting procedure

1. Confirm the strength of the proposed fitting location

The weight of the wall hanging bracket is approximately 3 kg

(6.6 lb.). When fitted to the LCD TV, the total weight is

approximately 23 kg (50.7 lb.) (32”) or approximately 18 kg

(39.7 lb.) (26”).

Check the wall strength at the 6 attachment locations by

referring to the dimension drawing of the wall hanging bracket

(given at right), and provide adequate reinforcement if strength

is not sufficient.

There are 12 holes in the wall hanging bracket.

If the wall material is wood, and adequate attachment strength

cannot be ensured by fastening at the 6 points at right, use as

many spare holes as necessary. However, exercise care

because some wall materials may crack if screws are located

too close together. The following dimensions are important.

Do not fit at any location where these dimensions cannot be

secured.

* For detailed dimensions for attaching the plasma TV, refer

to the separate External Dimension Drawing (page3).

∗ Provide spacing for the LCD TV of at least 100 mm (3 15/16

inches) to the top and right side, at least 300 mm (11 13/16

inches) to the left side, at least 100 mm (3 15/16 inches) to

the bottom and at least 42 mm (1 21/32 inches) to the rear.

2. Fit wall hanging bracket to wall

• Fit so that the arrow marks on the wall hanging bracket point upward.

• If the wall consists of a material such as concrete and bolts or nuts must be embedded

beforehand, determine the hole positions by aligning using the actual wall hanging

bracket, or calculate hole positions based on the dimension drawing, and then embed

“M6” bolts or nuts. When embedding bolts, locate so that the bolts protrude from the

wall by 10 to 15 mm (25/64 to 19/32 inches).

(1) Fasten the screw at the top center hole first.

(2) Using a level, correct any bracket inclination, and then fasten screws at the remaining

5 locations.

Use commercially available M6 screws suited to the wall surface material

(wood, steel frame, concrete etc.) for fitting the bracket to the wall.

3. Prepare the LCD TV

Place the LCD TV unit face down on a

blanket or other soft cloth that is clean and

free of debris, and follow the procedure

below.

(1) Remove the terminal cover at the lower

center of the TV’s backside.

∗ Refit the removed terminal cover after

wiring.

(2) Affix the included cover stickers (1 each

for left and right) to the stand pole holes

on the bottom of the TV. (Peel off the

backing paper and affix the cover

stickers to cover the holes.)

(3) Fix the included Allen head countersunk

screws, the dished toothed washers and

insulation spacers (4 sets) into the

insulation spacer fastening screw holes

using the included Allen wrench as

shown at right.

Fit the insulation spacers to

the LCD TV.

∗ Be sure to fit screws and tighten securely.

∗ Remove the TV stand from the LCD TV.

Carefully store the removed TV stand.

LCD TV

external

profile

Wall attachment holes (at 6 points)

Wall hanging bracket

Insulation spacer fastening screw hole

Fit into the

lower hole.

Remove the TV stand.

Remove the screws (4 pcs).

Stand pole hole

Cover sticker

Terminal cover

1 Allen head

countersunk screw

2 Dished toothed

washer

3 Insulation spacer

4 Allen wrench

Note

English

Unit: mm (inches)

7

4. Fit and fasten the LCD TV unit to the wall hanging bracket

(1) Hook the upper insulation spacers on the LCD

TV on the top notch of the wall hanging bracket.

(2) While lowering the TV, insert the lower insulation

spacers into the holes at the lower part of the

wall hanging bracket, and allow the TV to settle

down.

(3) Attach securely using the included unit fastening

screws (1 each for left and right).

Be sure to securely tighten the fastening

screws to keep the LCD TV from becoming

loose.

5. Preparation for wiring to equipment

(1) Remove the red screws for open/close fastening

(1 each on the left and right)

.

(2) Raise the LCD TV towards yourself, as shown in

the diagram at right, push up the lock bracket in

the arrow direction (upward), check that the

bracket has locked, and tentatively fasten.

Securely fasten the red screw for open/close

fastening (1 screw on left side)

to the lock

bracket fastening hole

.

(3) After the above preparation, wire to equipment.

(4) Refit the terminal cover removed during “Prepare

the LCD TV.”

6. Fastening of wall hanging bracket

(1) After wiring, remove the red screw for open/close fastening

on the left side from the lock bracket fastening hole , lift the

LCD TV slightly towards yourself, and then slowly let it swing

down again. The lock will be released.

(2) Securely fasten the red screws for open/close fastening (1 each

on the left and right)

to the fitting holes on the side of the unit.

Be sure to always fit the red screws for open/close fastening

in

order to fasten the LCD TV.

7. Removal of LCD TV unit

(1) Remove the screws for unit fastening (1 each on

the left and right) that are fitted to the wall hanging

bracket sides.

(2) While lifting the bottom of the LCD TV unit, pull it

towards yourself.

(3) When the lower insulation spacers are freed, keep

lifting upward.

Wall hanging

bracket

Wall

(1)

Top insulation spacer

Upper notch

Fitting hole for LCD

TV fastening screw

(3) LCD TV fastening

screw

Lower hole

Lower

insulation

spacer

(2)

Wall

Wall hanging

bracket

Red screw for

open/close

fastening

LCD TV

Wall

Lock bracket

Wall

Wall hanging bracket

Fitting hole for red screw

for open/close fastening

Wall hanging

bracket

(1) LCD TV fastening

screw

(2)

(3)

(2)

Wall

Insulation

spacer

Red screw for

open/close fastening

Lock bracket

fastening hole

Red screw for

open/close

fastening

Red screw for

open/close fastening

Note

English

Page is loading ...

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/



Printed in Japan

MBS0104A1035

Panasonic TYWK32LX20W User manual

This manual is also suitable for

Panasonic TYWK32LX20W User manual

in other languages

Related papers

Other documents