Panasonic TYWK15TA2U Operating instructions

Panasonic
Brand
Panasonic
Model
TYWK15TA2U
Type
Operating instructions
4
Unit preparation
Before starting the fitting procedure, remove the AC adapter and connection cable
attached to the LCD TV. Be sure to perform fitting correctly and securely.
For the TX-17LA1
TQZH537
Fitting procedure
TX-17LA1 / TX-20LA1
TX-22LT3 / TC-22LH1
1 Remove the stand cover.
Align the holes in wall hanging
bracket A with the screw holes in the
LCD TV.
Securely fasten with the four
bracket fitting screws A (M4 × 12
mm).
Remove the screw.
2 Remove the TV stand.
3 Fit wall hanging bracket A.
Fasten with the screw removed
in Step 1.
4 Refit the stand cover.
2
3
2
3
2
1
Raise the lower part of the stand
cover toward yourself.
Slowly slide off in the downward
direction.
Remove the 4 screws.
Remove the TV stand.
Insert the two claws at the top of
the stand cover.
Press in the lower part of the
stand cover.
For the TX-20LA1
Before starting the fitting procedure, remove the AC adapter and connection cable
attached to the LCD TV. Be sure to perform fitting correctly and securely.
1 Remove the stand cover.
Remove the screw.
2 Remove the TV stand.
Raise the lower part of the stand
cover toward yourself.
Slowly slide off in the downward
direction.
Remove the 4 screws.
Remove the TV stand.
Align the holes in wall hanging
bracket A with the screw holes in the
LCD TV.
Securely fasten with the four
bracket fitting screws A (M4 × 12
mm).
3 Fit wall hanging bracket A.
Note:
The stand cover is not used with the
wall hanging bracket. Store care-
fully, along with its screw, in case it
is required in future.
Before starting the fitting procedure, remove the AC adapter and connection cable
attached to the LCD TV. Be sure to perform fitting correctly and securely.
2
1
4
Unit preparation
For the TX-22LT3 / TC-22LH1
1 Remove the stand cover.
Remove the screw.
2 Remove the TV stand.
Remove the 4 screws.
Remove the TV stand.
Align the holes in wall hanging
bracket A with the screw holes in the
LCD TV.
Securely fasten with the four
bracket fitting screws A (M4 × 12
mm).
3 Fit wall hanging bracket A.
Fasten with the screw removed
in Step 1.
4 Refit the stand cover.
Insert the two claws at the top of
the stand cover.
Press in the lower part of the
stand cover.
  • Page 1 1
  • Page 2 2

Panasonic TYWK15TA2U Operating instructions

Panasonic
Brand
Panasonic
Model
TYWK15TA2U
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents