Roche Accutrend Plus Short Guide

Brand: Roche

Model: Accutrend Plus

Category: Measuring, testing & control

Type: Short Guide

Roche Accutrend Plus is a CLIA-waived system designed for quantitative measurement of glucose and cholesterol levels in capillary whole blood. Intended for professional and self-testing use, it features a large display, user-friendly interface, and coding system to ensure accurate results. The meter is capable of providing results for glucose tests in 12 seconds and cholesterol tests in 180 seconds. It also offers the flexibility of applying blood samples either inside or outside the meter, making it convenient for various testing scenarios.

Accutrend Plus

Quick Reference Guide

This is a CLIA waived system.

Place the meter on a level surface or

hold it steady in your hand. Switch the

meter on.

Ensure that the display is on and that all

display elements are displayed correctly.

Check the time and date (if you want to

save this information with the result).

The Accutrend Plus meter is used

for the quantitative measurement of

glucose and cholesterol in capillary

whole blood. The meter is suitable

for professional use as well as for

self- testing.

Please note:

This Quick Reference Guide is

not intended as an alternative

to reading the User’s Manual.

Please read the Accutrend

Plus User’s Manual carefully

before using the meter for the

first time.

The following steps describe a

cholesterol test but can likewise be

performed for a glucose test.

With the chamber flap closed, insert

the code strip as far as it will go and

remove it immediately.

Successful coding is confirmed by a

short beep (if the beeper option is

enabled) and the code is displayed

by the meter. If an error occurs or if

the code is not displayed, repeat

the process after a few seconds.

Insert a code strip as shown. Do not

touch the printed area behind the black

bar or on the back of the strip.

If no code has ever been stored,

codenr flashes with three dashes.

Otherwise the last stored code is

displayed.

You must code the meter

every time you open a new

test strip container.

Hold the test strip as shown and insert

it as far as possible. If the strip is correctly

inserted you will hear two beeps (if the

beeper option is enabled). The code

number of the Accutrend Cholesterol

test strip is displayed.

Remove an Accutrend Cholesterol test

strip from the container. Always close

the container again immediately. The

cap contains a drying agent to protect

the strips from humidity.

Open the measurement chamber flap.

Use a lancing device to pierce a finger

and obtain a hanging drop of blood.

CHOL

For blood application inside the meter:

Apply the hanging drop of blood

immediately from the finger to the

yellow application area of the Accutrend

Cholesterol test strip. Do not touch the

application area with your finger.

Continue with step (12).

For blood application outside the meter:

Remove the Accutrend Cholesterol test

strip and leave the flap open. Apply the

hanging drop of blood immediately

from the finger to the yellow application

area of the test strip. Do not let the

application area come into contact with

your skin. Insert the Accutrend

Cholesterol test strip back into the

meter.

You can apply blood with the strip

inside or outside the meter.

To avoid incorrect results, make sure

the application area is completely

covered with blood.

Measurement starts.

Result displays after:

When the measurement is complete

the meter beeps (if the beeper

option is enabled) and the result is

displayed.

Results falling outside the

measurement range are displayed as

Hi (above the measurement range)

or Lo (below the measurement

range).

To perform a Glucose test, follow the

same simple steps using the

Accutrend Glucose test strip.

Glucose: 12 seconds

Cholesterol: 180 seconds

Close the flap to start the cholesterol

measurement.

0 5340497001 (03) 2012-07 USA

ACCUTREND and COBAS

are trademarks of Roche.

Manufactured for and

distributed in the U.S.A. by

Roche Diagnostics

9115 Hague Road

Indianapolis, IN 46256

Made in Germany

Roche Diagnostics GmbH

Sandhofer Strasse 116

68305 Mannheim

Germany

www.roche.com

0123

For technical assistance:

call 1-800-440-3638

24 hours a day, 7 days a week.

This is a CLIA waived system. Laboratories with a

certificate of waiver must follow the manufacturer's

instructions for performing the test.

42 CFR 493.15(e)(1).

Roche Accutrend Plus Short Guide

Brand: Roche

Model: Accutrend Plus

Category: Measuring, testing & control

Type: Short Guide

Download PDF

report

Roche Accutrend Plus Short Guide

Roche Accutrend Plus Short Guide

Related papers

Other documents