The SGW Glass Washer Series is designed to fit
under any standard bar. At only 40 inches, it has a
high volume
capacity of 37 full (20 × 20) racks or 74 half racks
per hour. The entire wash and rinse cycle is 1½
minutes long and uses only 1¾ gallons of water.
4 MODELS TO CHOOSE FROM
SGW-M: Single Door Glass Washer.
SGW-HM:
Single Door Glass Washer with maintenance
heater.
SGW-2D-M:
Two Door Glass Washer—may be loaded,
unloaded and operated from either side of the bar. Now
waiters and waitresses can operate the machine while
waiting for their orders to be filled.
SGW-2D-HM:
Two Door Glass Washer with
maintenance heater.
STERO SGW GLASS WASHERS
STANDARD FEATURES
Door Safety Switch: Automatic shut-off if door is
opened during the Wash/Rinse cycle. Door must be
closed for machine to operate.
Chemical Dispenser:
Built-in. Three peristaltic pumps—
controlled individually—dispense detergent, sanitizer
and a drying agent.
Scrap Accumulator: Drain holding tank has a removable
scrap screen to prevent food soil from plugging drain.
Enclosure Panels:
Front and side.
Upper Wash and Rinse Stainless Steel Spray Jets:
Wash and rinse from above the ware in conjunction with
rotating lower wash arm.
Temperature Gauge: Visible from the front of the
warewasher.
Frame and Adjustable Feet: Stainless steel.
DOOR-TYPE
Product Specification Sheet
SGW SERIES: LOW TEMP 20" x 20" RACK CHEMICAL SANITIZING ENERGY SAVER
SGW-M, SGW-2D
Sparkling Clean Glasses
with Chemical Sanitizing,
Energy Saving Glass Washer!
OPTIONAL FEATURE
Maintenance Heater: 2kW, with enough capacity
to ensure hot water is always available for your
machine. This is especially convenient if your hot
water heater is distant from the unit.
Item #: ___________________________________________ A/A File #: ___________________________________________
STANDARD EQUIPMENT FEATURES BENEFIT
Low temperature operation Energy savings
115V.—1Ph. Electrical Ease of installation
3 Product chemical dispensers are standard Standard equipment for full functionality
STERO
SGW GLASS WASHERS
Product Specification Sheet
STERO, a division of Illinois Tool Works Inc.
3200 Lakeville Highway
Petaluma, CA 94954
Phone: 800-762-7600
Fax: 707-762-5036
WWW.STERO.COM
Printed in the USA
/
