The original cantilever “pop-up” hood as
created by STERO. All you do is push the rack
into the machine, close the door and That’s
all! (Sorry, but it won’t stack the clean dishes,
too!).
The SDRA is delivered to you completely pre-
plumbed and prewired.
STERO SDRA STATIONARY RACK WASHER
DOOR-TYPE
Product Specification Sheet
SDRA: SINGLE TANK STATIONARY DOOR-TYPE 20" RACK CANTILEVER POP-UP HOOD
Item #: ___________________________________________ A/A File #: ___________________________________________
The Door Machine with the
Stero Pop-Up Door Washes,
Rinses and Opens Automatically!
Safety Switch: Unit will not operate unless the door is in
closed position.
Fully Automatic Operating Controls: Timed wash, rinse and
dwell for 60 second cycle time.
Motor: 1 HP, drip-proof, 1750 rpm, sealed ball bearings, with
overload protection, completely integrated with centrifugal
pump through stainless steel rotar y seal.
Thermometers: One each in wash tank and final rinse.
Mounted at eye level.
Balanced Revolving Wash Action: Above and below ware.
Front Enclosure Panel: Stainless steel.
Cantilever Hood: Without front corner posts; permits
completely flexible installation in straight-through, corner,
or U-shaped table arrangements.
Tank and Hood: Seamless welded construction using
16 gauge, type 304/18 – 8, No. 4 mill finish stainless
steel. Rack tracks are 12 gauge stainless steel.
Frame: Heavy tubular steel and flat stock with adjustable
feet conforming to NSF Standard No. 3.
Flow Pressure Gauge: On final rinse line.
Internal Wiring Complete: Waterproof conduit to terminal block
in control box for connection of motor service (1 HP) and tank
heater (5 kW).
Internal Plumbing Complete: Final connections limited to one
180° water connection with complete final rinse plumbing
assembly and one waste connection.
STANDARD FEATURES
STANDARD EQUIPMENT FEATURES BENEFIT
Full perimeter frame Longevity and durability
Cast stainless wash arms Full rack coverage for excellent results
Cantilever door with no corner posts Ease of loading and unloading
All available options are standard on this unit Closing door star ts the wash cycle, door automatically opens at end of cycle
STERO, a division of Illinois Tool Works Inc.
3200 Lakeville Highway
Petaluma, CA 94954
Phone: 800-762-7600
Fax: 707-762-5036
WWW.STERO.COM
Printed in the USA
STERO SDRA
STATIONARY RACK WASHER
Product Specification Sheet
STERO, a division of Illinois Tool Works Inc.
3200 Lakeville Highway
Petaluma, CA 94954
Phone: 800-762-7600
Fax: 707-762-5036
WWW.STERO.COM
Printed in the USA
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Stero Dishwashers SDRA-PKG Datasheet
-
-
-
-
-
-
-
Stero Dishwashers ER-44 GEN II Datasheet
-
-