Stero Dishwashers SD-2RA Datasheet

Type
Datasheet

Stero Dishwashers SD-2RA is all about efficiency and flexibility in the dishwashing process. It comes with a 1 HP motor that drives the wash and rinse cycles with enough power to ensure spotless dishes. The fully automatic operating controls make it easy to use, with timed wash, rinse, and dwell cycles for a quick 60-second cycle time.

The SD-2RA is built to last, with a full perimeter frame and cast stainless wash arms that provide full rack coverage for excellent cleaning results. The cantilever door with no corner posts makes it easy to load and unload dishes, and the seamless welded construction using 16 gauge, type 304/18 – 8, No. 4 mill finish stainless steel ensures durability in even the busiest kitchens.

Stero Dishwashers SD-2RA is all about efficiency and flexibility in the dishwashing process. It comes with a 1 HP motor that drives the wash and rinse cycles with enough power to ensure spotless dishes. The fully automatic operating controls make it easy to use, with timed wash, rinse, and dwell cycles for a quick 60-second cycle time.

The SD-2RA is built to last, with a full perimeter frame and cast stainless wash arms that provide full rack coverage for excellent cleaning results. The cantilever door with no corner posts makes it easy to load and unload dishes, and the seamless welded construction using 16 gauge, type 304/18 – 8, No. 4 mill finish stainless steel ensures durability in even the busiest kitchens.

STERO
SD-2RA STATIONARY RACK WASHER
DOOR-TYPE
Product Specification Sheet
SD-2RA: SINGLE TANK STATIONARY RACK HIGH TEMPERATURE DOOR-TYPE 20" RACKS
Suitable For All Table Layouts—
Handles Dish Racks in and out
from Any Direction!
Item #: ___________________________________________ A/A File #: ___________________________________________
Safety Switch: Unit will not operate unless the door is in
closed position.
Fully Automatic Operating Controls: Timed wash, rinse
and dwell for 60 second cycle time.
Motor: 1 HP, drip-proof, 1750 rpm, sealed ball bearings,
with overload protection, completely integrated with
centrifugal pump through stainless steel rotary seal.
Thermometers: One each in wash tank and final rinse.
Mounted at eye level.
Balanced Revolving Wash Action: Above and below
ware.
Front Enclosure Panel: Stainless steel.
Cantilever Hood: Without front corner posts; permits
completely flexible installation in straight-through, corner,
or U-shaped table arrangements.
Tank and Hood: Seamless welded construction using
16 gauge, type 304/18 8, No. 4 mill finish stainless
steel. Rack tracks are 12 gauge stainless steel.
Frame: Heavy tubular steel and flat stock with adjustable
feet conforming to NSF Standard No. 3.
Flow Pressure Gauge: On final rinse line.
Internal Wiring Complete: Waterproof conduit to terminal
block in control box for connection of motor service (1
HP) and tank heater (5 kW).
Internal Plumbing Complete: Final connections limited
to one 180° water connection with complete final rinse
plumbing assembly and one waste connection.
Choice of Tank Heat and Options: Available in either
electric or steam heat. May be equipped with only those
options the customer requires.
STANDARD FEATURES
STANDARD EQUIPMENT FEATURES BENEFIT
Full perimeter frame Longevity and durability
Cast stainless wash arms Full rack coverage for excellent results
Cantilever door with no corner posts Ease of loading and unloading
STERO SD-2RA STATIONARY RACK WASHER
Product Specification Sheet
STERO, a division of Illinois Tool Works Inc.
3200 Lakeville Highway
Petaluma, CA 94954
Phone: 800-762-7600
Fax: 707-762-5036
WWW.STERO.COM
Printed in the USA
  • Page 1 1
  • Page 2 2

Stero Dishwashers SD-2RA Datasheet

Type
Datasheet

Stero Dishwashers SD-2RA is all about efficiency and flexibility in the dishwashing process. It comes with a 1 HP motor that drives the wash and rinse cycles with enough power to ensure spotless dishes. The fully automatic operating controls make it easy to use, with timed wash, rinse, and dwell cycles for a quick 60-second cycle time.

The SD-2RA is built to last, with a full perimeter frame and cast stainless wash arms that provide full rack coverage for excellent cleaning results. The cantilever door with no corner posts makes it easy to load and unload dishes, and the seamless welded construction using 16 gauge, type 304/18 – 8, No. 4 mill finish stainless steel ensures durability in even the busiest kitchens.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI