BEFORE YOUR FIRST USE
Please charge fully before use. You may charge via your PC or the adapater that may have been
included with your device. Do not use other adapters, as they may damange your device.
1. Be sure that the status light is OFF.
2. Plug USB cable into watch rst.
3. Plus other end of USB directly into your PC. Note: USB hubs may cause your device to not
work properly, so always use a direct USB port when charging or accessing your device.
THE CD AND NEEDED FILES
You should not require the drivers and other les that may have been included on a CD with
your product for normal usage of your device. Some les may be available on the product page
on our website. Always check our site for the latest available les and manual.
From our site, please download the following le: time.txt
Keep that le handy for the next step.
SETTING THE TIME AND DATE
1. Open the TIME.TXT le you downloaded from our website. is is found on the product
page for your watch, in the TECH SUPPORT section. Open this le using a standard text
editor, such as NOTEPAD in Windows.
2. e DATE and TIME is in the following format and must t this format exactly to work
properly: YEAR-MO-DA 23:59:59 FLAG (Y or N) at is the YEAR in 4 digits, the
MONTH in 2 digits, the DAY in 2 digits, SPACE, then the HOUR in 24 hour clock,
MINUTES, SECONDS, SPACE, and the FLAG (Y or N) to turn Time Display ON or OFF.
For example, 1:15pm on December 31, 2012 with NO time displayed in your video would be
2012-12-31 13:15:00 N
Please note the SPACE in between the date and time.
3. SAVE this le.
4. Plug the USB cable into your watch rst.
5. Plug the other end of the USB cable directly into your PC.
6. Please allow a few moments for Windows to recognize your device. Windows may install
standard drivers for your device to work properly the rst time you connect. is is normal.
7. In MY COMPUTER, your watch now appears as an external drive, such as E: or F. Open
that drive. Inside you may already see a folder named DCIM. is is normal.
8. COPY your le TIME.TXT from your PC, and PASTE it into your watch drive. Do not paste
it into the DCIM folder.
9. e next time you use your watch, it will start using the time you have set in the TIME.TXT
le.
10. Please always EJECT your watch properly from Windows before disconnecting from
your PC. Right-click on the Drive Letter (E or F, etc) and choose EJECT. Please wait until
Windows noties you that it is safe to remove the device before unplugging it.