Safety Basement SB-WR4320 User manual

Brand: Safety Basement

Model: SB-WR4320

Category: Watches

Type: User manual

ank you for purchasing from SafetyBasement.com! We appreciate

your business.

We made this simple manual to help you enjoy your new product as

quickly and easily as possible.

Be sure to check the TECH SUPPORT tab on your product page at

SafetyBasement.com for the latest available manual.

INSTRUCTION MANUAL

Revised: Jan 10, 2013

Men’s Wrist Watch Camera

SB-WR4320

PRODUCT REFERENCE

A BUTTON

CAMERA LENSE

STATUS LIGHT

GREEN / BLUE

B BUTTON

/ RESET

USB PORT

MICROPHONE PORT

ON SIDE

STATUS LIGHTS

STEADY BLUE - Stand By Mode

BLINKING GREEN- Recording Video

BLINKING BLUE- Recording Audio Only

GREEN / BLUE ALTERNATING - Photo Mode

BLUE BLINKING QUICKLY - Taking Photo

GREEN BLINKING QUICKLY - Shutting Down

BEFORE YOUR FIRST USE

Please charge fully before use. You may charge via your PC or the adapater that may have been

included with your device. Do not use other adapters, as they may damange your device.

1. Be sure that the status light is OFF.

2. Plug USB cable into watch rst.

3. Plus other end of USB directly into your PC. Note: USB hubs may cause your device to not

work properly, so always use a direct USB port when charging or accessing your device.

NEEDED FILES

You should not require the drivers and other les that may have been included on a CD with

your product for normal usage of your device. Some les may be available on the product page

on our website. Always check our site for the latest available les and manual.

From our site, please download the following le: timecfg.txt

Keep that le handy for the next step.

SETTING THE TIME AND DATE

1. Open the TIMECFG.TXT le you downloaded from our website. is is found on the

product page for your watch, in the TECH SUPPORT section. Open this le using a

standard text editor, such as NOTEPAD in Windows.

2. e DATE and TIME is in the following format and must t this format exactly to work

properly:

TIME,2012/12/31/12:55:30:

NOTE: ere are NO SPACES. Include ALL punctuation, including ending semi-

colon. Include the word TIME. For example, 1:15pm on December 31, 2012 would be

TIME,2012/12/31/13:15:00;

3. SAVE this le.

4. Plug the USB cable into your watch rst.

5. Plug the other end of the USB cable directly into your PC.

6. Please allow a few moments for Windows to recognize your device. Windows may install

standard drivers for your device to work properly the rst time you connect. is is normal.

7. In MY COMPUTER, your watch now appears as an external drive, such as E: or F. Open

that drive. Inside you may already see a folder named DCIM. is is normal.

8. COPY your le TIMECFG.TXT from your PC, and PASTE it into your watch drive. Do not

paste it into the DCIM folder.

9. e next time you use your watch, it will start using the time you have set in the TIMECFG.

TXT le.

10. Please always EJECT your watch properly from Windows before disconnecting from

your PC. Right-click on the Drive Letter (E or F, etc) and choose EJECT. Please wait until

Windows noties you that it is safe to remove the device before unplugging it.

CAMERA LENSE

STATUS LIGHT

GREEN / BLUE

MICROPHONE PORT

ON SIDE

POWER ON / VIDEO MODE

1. Your watch immediately enters Video Mode when powered on and beging recording.

2. Hold the A button. e status light will be Blue as your watch starts up.

3. e status light will quickly start Blinking Green as it records video.

STAND BY MODE

1. To stop recording video and enter Stand By Mode, quickly press the A button.

2. e status light will be Steady Blue. It is now in Stand By Mode.

VIDEO MODE

1. In Stand By Mode (Blue status light), quickly press the A button.

2. e status light will Blink Green while recording.

3. To STOP recording, press the A button again.

PHOTO MODE

1. In Stand By Mode (Blue status light), quickly press the A button 3 times. e status light will

blink Blue and Green. It is now in Photo Mode.

2. To take a photo, press the A button quickly. e status light will Blink Blue quickly while

your photo is being saved.

AUDIO ONLY

1. In Stand By Mode (Blue status light), quickly press the A button 2 times.

2. e watch will Blink Blue. It is now recording Audio Only.

3. To STOP recording, press the A button. e status light will turn blue. You watch is now

back in Stand By Mode.

POWER OFF

1. To turn o your watch, HOLD the A button. e status light will blink Green quickly, the go

dark. Your watch is now OFF.

AUTO POWER OFF

1. If power is low, the status light will blink blue for about 8 seconds, save your current le and

shut down. Please recharge fully before next use.

2. If your watch memory is full, the blue and green lights will blink for about 8 seconds and the

watch will shut o. Copy your les to your PC to make room for your next recording.

3. Your watch will shut o if le in Stand By Mode for 3 minutes.

RESET

1. Should your watch not respond properly, you can reset it by holding the A and B buttons

until the status light goes dark. en Power On normally.

WINDOWS - RETRIEVE YOUR FILES

1. Device must be OFF before connecting to your PC.

2. Connect USB cable to watch rst.

3. Connect other end of USB cable to your PC using USB port directly on PC. Note: A USB

hub may cause your device to not work properly.

4. Please wait until Windows recognizes your device. is may take several seconds. Note: the

rst time you connect your device, Windows may install standard drivers. is is normal.

5. Access your device as you would any standard Flash Drive.

6. COPY your les from the device to a folder on your PC.

7. You may now highlight and DELETE the les from your device.

8. Be sure to properly EJECT your device from Windows before unplugging it.

MAC OS X - RETRIEVE YOUR FILES

1. Device must be OFF before connecting to your Mac.

2. Connect USB cable to watch rst.

3. Connect other end of USB cable to your Mac using USB port directly on Mac. Note: A USB

hub may cause your device to not work properly.

4. Please wait until Mac recognizes your device. is may take several seconds. It will mount as

a Device in your FINDER.

5. Access device as you would any standard FLASH DRIVE.

6. SPECIAL NOTES TO MAC USERS!

7. To properly save your les to your Mac, MOVE your les, rather than copy.

8. Create a folder on your Mac.

9. Highlight the les on the device.

10. CMD CLICK and drag the les to your folder. Let go and choose MOVE.

11. To properly empty your device on Mac, be sure to Empty your Trash Can before ejecting the

device.

12. Be sure to properly EJECT your device from Mac before unplugging it.

ank you! And enjoy your new device from SafetyBasement.com!

DEVICE SPECIFICATIONS

Video Format AVI

Video Encoding M-JPEG

Video Resolution 1280x960

Frame Rate 30 FPS

Image Ratio 4:3

File Size 10 minute video (approx) 427 MB

Photo Format JPEG

Photo Resolution 4032x3024 pixels

File Size (approx) 584 KB

Audio Format WAV

Audio Encoding 768 kbps

File Size 10 minute recording (approx) 55 MB

Memory Type Onboard Flash Memory

Storage 4 GB

Additional Specs

Power Built in lithium battery

Operating System External drive function compatible with cur-

rent Windows and Mac operating systems

View Angle 62 degrees

Voice Sampling 16KHz

Minimum Illumination 1 Lux

Size 52x45x15mm approx.

Weight 100 g

USB 2.0 data port Compatible with USB 1.1

RECOMMENDED SOFTWARE

Your Windows PC or Mac has built-in soware that will play most of the les created by devices

like yours. However, if you are having problems playing your les, please download and try

these programs.

ere are lots of dierent soware packages available. However, we do recommended these

basic programs that will suit most people. is soware is free and can be downloaded directly

from the links below. You can nd support and tutorials for these programs on their respective

websites. SafetyBasement can not provide soware support for these programs

As with ANY les you download from the internet, be sure to scan them for viruses using your

particular virus scanner. While most users report no issues using this soware, we can not be

responsible for any damages caused by this soware. Please proceed carefully. Back up your PC

before installing any new soware.

VIDEO PLAYBACK - VLC

(http://www.videolan.org/vlc/index.html)

e VLC Media Player can play almost any video or audio le type. ere is a

version for Windows and for Mac OS X.

VIDEO EDITING for WINDOWS - MOVIE MAKER 2012

(http://windows.microso.com/en-US/windows/get-movie-maker-download)

Movie Maker is a simple video editing program from Microso. Please go to this

link, and choose the download for your version of Windows. Please note: Movie

Maker is part of the Windows Essentials package that must be installed.

VIDEO EDITING for MAC OS X - iMOVIE

(Visit the Apple Mac App Store for latest version)

iMovie is a simple video editing program from Apple. It comes installed with yor

new Mac. e latest version is also available at the Mac App Store at additional

cost.

AUDIO PLAYBACK and EDITING - AUDACITY

(http://audacity.sourceforge.net/)

Audacity is a popular audio editing program used by amateurs and professionals

to edit simple and complex audio projects. You can use Audacity to convert your

audio les to another format, such as MP3. ere is a version for Windows and

Mac OS X.

PHOTOS

Your Windows and Mac computers have the ability to do basic editing of photos

built in.

Safety Basement SB-WR4320 User manual

Brand: Safety Basement

Model: SB-WR4320

Category: Watches

Type: User manual

Download PDF

report

Safety Basement SB-WR4320 User manual

Safety Basement SB-WR4320 User manual

Related papers

Other documents