Trex Outdoor Furniture TXS103-1-CW Operating instructions

Brand
Trex Outdoor Furniture
Model
TXS103-1-CW
Type
Operating instructions

This manual is also suitable for

clear rubber disks
Assembly Instructions
10/27/2010
Model: TXD38
Remove and discard two clear rubber disks.
They are used for protection during shipping.
Step 1
Features
Chair folds1.
Back has 3 seating positions2.
Brace
B
Table frame
Foot
Leg
A
A
B
C
C
B
B
Removable table plug
included in table.
__(8) Leg
__(4) Foot
Model: TXNCT3772
Qty. Description
Assembly Instructions
Step 1
(8) 14x3" screws
Attach braces to the leg assemblies using
(16) 14x2½" screws - Do not tighten yet.
Set table upright and tighten all bolts.
Step 4
Step 3
Attach feet to legs using (8) 2½" Chair bolts.
__(4) Brace
__(1) Hardware pack
__(1) Table top
Step 2
Lay the table frame on a flat surface.
Attach the leg assemblies to the frame using
ALL HARDWARE IS COATED STAINLESS STEEL
10/16/2012
A - .27 X 2-1/2 SOCKET WAFER A
16
fine thread
C - 1/4-20 X 2-1/2 WAFER SHCS
8
B - .27 X 3 SOCKET WAFER A
8
TOOLS NEEDED
4mm HEX KEY: INCLUDED
  • Page 1 1
  • Page 2 2

Trex Outdoor Furniture TXS103-1-CW Operating instructions

Brand
Trex Outdoor Furniture
Model
TXS103-1-CW
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents