Fortress Technologies Ani Wi-Fi User manual

Brand: Fortress Technologies

Model: Ani Wi-Fi

Type: User manual

Fortress Technologies Ani Wi-Fi is a Wi-Fi alarm system that offers a wide range of features to keep your home safe. With 8 customizable zones, you can tailor the system to meet your specific needs. Each zone can be named individually and has its own independent arm/disarm setting. The system also supports multiple alarm operations, so you can choose the best way to protect your home.

In addition to its alarm capabilities, the Ani Wi-Fi system also includes a number of smart home features. You can control up to 8 smart sockets, 1 alarm siren, and 1 linkage switch. The system also includes 4 linkage switch schedules, so you can automate your home's lighting, appliances, and other devices.

Ani Wi-Fi Alarm System

MANUAL

TABLE OF CONTENTS

FEATURES

APPEARANCE

APP

CONNECTING TO WIFI NETWORK

DEVICE LIST

CHANGE THE DEVICE PASSWORD

APPLICATION OPERATION

ARM/DISARM

SMART HOME

ALARM CONTACT NUMBERS

ZONE SETTINGS

ARM/DISARM

ACCESSORIES

ADDING OTHER WIRELESS ACCESSORIES

REMOTE CONTROL MANAGEMENT ZONE NAME ZONE TYPE

ZONE TYPES AND THEIR FUNCTION SIREN DELAY SETTING RING TIME

PANEL OPERATION

TECHNICAL PARAMETERS

ADD REMOTE CONTROL DELETE REMOTE CONTROLS ADD SENSORS

DELETE SENSORS

7-10

ALARM LOG

SCHEDULE ARM/DISARM

SCHEDULE OUTLET TIMER

MONITOR

PANEL SETTINGS

ALARM NOTIFICATION ALARM VOLUME RING TIMES ALARM AUDIO

BEEP VOLUME PANEL NAME PANEL PASSWORD PANEL TIME

SYSTEM SETTINGS

14-18

20-23

24-25

ADD STROBE SIREN ADD SMART OUTLET

STATUS LIGHT INDICATION

CONTROL THROUGH LAND LINE

APPEARANCE

FEATURES:

Operation by voice instruction.

Supports 2.4G WIFI wireless network.

Real-time host feedback to the application.

Supports multiple alarm operations.

Compatible with IOS/Android operating systems.

8 customizable zones with independent arm/disarm.

Zones can be named individually.

Up to 3 telephone alarm contacts.

Power failure notification.

4 arm/disarm scheduling groups.

Control 8 smart sockets, 1 alarm siren and 1 linkage switch.

4 linkage switch schedules.

Adjustable panel voice/alarm volume.

Press “Create an Account”.

Select “Email Register”.

Type in the email address you would like your account be assigned to.

Next, type in the password you would like to use.

Press Confirm.

APP

IOS/Android

Registration by Email

If you have not used the Ani application before, you will need to create an

account. Follow the below steps.

Scan the compatible QR code to download the app or search

“Fortress Ani WiFi” in the App Store or Google Play.

CONNECTING TO WIFI NETWORK

In the application go to the “Device list” and press the “+” button in the

top right hand corner.

Next, press the “I want to configure a new device” button at the button

of your screen.

Enter your WiFi network password then press Next.

Press and hold the button until the panel says “WiFi configuring, please

enter WiFi password on the app”. The light will start flashing white.

Press the “Start Configure Button”

A timer will start counting down from 60 seconds.

Once the ANI device connects the white flashing light will turn green.

In the Device List, click on the W1 device to use the application.

DEVICE LIST

CHANGE THE DEVICE PASSWORD

There are three options under the device list page; Bound Device, Find

New Device, and Offline Device.

Click on any device under the “Bound Device” list.

Click the button in the top right hand corner.

Select Settings

Click on “Device Password” then type in your new password.

Lastly, press confirm

STATUS DESCRIPTION

BOUND DEVICE

FINE NEW DEVICE

OFFLINE DEVICE

The device is connected to the network

successfully and the phone has

connected to the device.

The device is connected to the network

but the phone has not connected to

the device.

The device had previously been

connected to the network but has

become disconnected.

APPLICATION OPERATION

ARM/DISARM

SMART HOME

To arm in away mode, press the button.

To disarm the system, press the button.

To arm in home mode, press the button.

There can be up to 8 smart outlets on the ANI system. There is an

toggle switch and an toggle switch for each outlet. Each outlet

can be turned on/off by toggling the switch.

If you would like to rename each outlet, click on the outlet number and

enter a new name. Press confirm to finish.

ALARM CONTACT NUMBERS

Adding Phone Numbers

Delete Phone Numbers

To add a phone number open your Ani Wifi application.

Scroll to “ALARM NUM” on your menu bar.

Press the Add One button.

Type in the number that you would like to use.

Press Confirm to finish.

If you need a number in front of the phone number, insert the * icon

which will delay by 1s when dialing. For example: 0*12345678.

You can have a total of 3 phone numbers.

Open your Ani Wifi application.

Scroll to “ALARM NUM” on the menu bar.

Press the DELETE button.

Select which numbers you want to delete by pressing the red delete

button.

ZONE SETTINGS

Remote Management

The Ani system has 1 zone for remote management (8 zones). There are

8 different zones for sensors, all of which can hold 10 sensors. Each

defense zone can be armed/disarmed independently.

Open you Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Click on “Remote Management”

If sound is turned on, the sirens will chirp when the system is

armed/disarmed.

Click on the sound toggle to turn it off.

Open your Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Press on the zone you would like to change the name of.

Click on the icon.

Select from the preset option or create a custom name.

Press the button to finish.

Zone Name

There are 8 different zones that can be renamed. To modify their

names, follow the steps bellow:

Zone Type

Open your Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Press on the zone you would like to change the zone type on.

Press on the icon.

Select which zone type you want then press the button to finish.

Each zone can have their type changed individually. There are 8

different zone types to choose from. To change the zone type follow

the steps bellow:

Siren

Zone Types And Their Function

TYPE DISARMED ARMED STAY ARMED ADDITIONAL FEATURES

ORDINARY

STAY ARM

INTELLIGENT

EMERGENCY

CLOSED

DOORBELL

CHIME

ELDER

Inactive

Active

Inactive

Active

Inactive

Active

Inactive

Active

Inactive

Active

Needs to be triggered twice within

30 seconds to activate the alarm.

The sensor will cause the panel to

play a doorbell sound

Sensor causes the system to play a

chime sound when the system is

disarmed

Open your Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Choose the zone you are wanting to change.

Click the button to turn off any wireless sirens.

Click the button to turn off the built in siren on the Ani Hub.

Each of the 8 zones can have all sirens turned on/off or have just the

outside sirens turned off. To do so, follow the steps bellow:

Alarm will be triggered but no sirens

will sound.

Delay Settings

Each of the 8 zones can have entry and exit delays set individually. The

change the delay time, follow the steps bellow:

Note: Time is measured in seconds

Note: Time is measured in seconds.

Open your Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Choose the zone you are wanting to change.

Press the button to change the arming delay time (exit delay).

Press the button to change the alarm delay time (entry delay).

Ring Time

Open your Ani WiFi application.

Scroll to “ZONE SET” on your menu bar.

Choose the zone you are wanting to change.

Press the button the change the alarm time.

Press the button to finish.

Each of the 8 zones can have an alarm time set individually. The change

the alarm time, follow the steps bellow:

Note: Time is measured in minutes.

ALARM LOG

Open your Ani WiFi application.

Scroll to ALARM LOG on the menu bar.

All alarm events will be saved in the alarm log. To find the alarm log

follow the steps below:

SCHEDULED ARM/DISARM

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Arm Timing”.

Press the button in the top right hand corner of your screen.

Select the time you would like to use.

Select which days you would like the auto arm/disarm to take

place.

For example 1 = Sunday and 7 = Saturday.

Decide if you want the automation to be for arming or disarming

the system by toggling the arm/disarm switch.

Press “Setting” in the top right corner to finish.

The system can be set to arm/disarm at set times each day. To set

what time of day you want to arm/disarm your system, follow the

steps bellow:

SCHEDULED OUTLET

The system can be set to automatically turn its outlets on or off at a set

time every day. To set what time of day the outlets are turned on/off

follow the steps bellow:

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Arm Timing”

Press the button in the top right hand corner of your screen.

Select which time of day.

Select which days the outlet turns on/off.

For example, 1 = Sunday and 7 = Saturday.

Decide if the automation event will be for turning on or off the outlet.

Select which outlet number will be effected by the automation.

Press “Setting” in the top right corner to finish

Open your Ani WiFi application.

Scroll top “MONITOR” on the menu bar.

Click on whichever camera you would like to view.

To close the live feed, press the button.

If you just want to quickly view your camera in real time on the Ani WiFi

application, follow the steps below:

Open the N62 application.

Press the Register button at the bottom of the screen.

For details on how to sync camera, refer to the camera manual.

MONITOR

In order to maximize the features available with the Fortress Eyesight

camera, an auxiliary application is needed. Download the N62

application from the Play Store for Android or the App Store for IOS. Once

the application has been downloaded, follow the steps bellow:

Open your Ani WiFi application

Press the button in the top right hand corner.

Press the button which says “Monitor”.

The N62 application will open.

Select the camera that you would like to view.

Once you have downloaded the N62 application follow the following

steps to get to it from the Ani WiFi application:

To receive alarm notifications, push notifications will need to be turned

on for the Ani WiFi system. If enabled, the application will send

notifications to your phone letting you know the alarm was set off.

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Press and hold the “Alarm VOL” button while sliding it side to side to

adjust volume.

PANEL SETTINGS

Alarm Notification

Alarm Volume

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Press and hold the “Ring Times” button while sliding it side to side to

adjust the ring time.

Ring Times

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Select “Alarm Audio”.

Scroll through the list to select which tone you want.

Press the button to finish.

Alarm Audio

There are different alarm tones that you can choose from for the hub

alarm. To change those tones following the steps below:

The Ring time setting adjusted how long it will take before the Ani

system picks up when hooked to a land line.

BEEP VOLUME

The beep volume adjusts the voice/beep volume level. To change the

volume follow the steps bellow:

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Press and hold the “Beep VOL” button while sliding it side to side to

adjust the volume.

Panel Name

The devices name can be changed to make managing your Ani WiFi

devices easier to manage. To change the name follow the steps below:

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Press “Device Name”

Type in the name you want.

Press confirm to finish.

Panel Password

If you would like to change the password for your device, follow the steps

below.

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

Select “Device Password”.

Type in the password you would like to use.

Press confirm to finish.

Open your Ani WiFi application.

Press the button in the top right hand corner.

Press the button which says “Settings”.

To set manually, click on the date and time, then set the time

manually.

To automatically set, press “RESET”

Panel Time

The panel time can either be manually set or automatically set. To

change the time follow the steps below:

Open your Ani WiFi application.

Press the button in the top left hand

corner of the screen.

Press desired link!

System Setting

If you need to change your account

password, change device, get help, or check

the about page, follow the steps below:

Page is loading ...

Fortress Technologies Ani Wi-Fi User manual

Fortress Technologies Ani Wi-Fi User manual

Fortress Technologies Ani Wi-Fi User manual

Related papers

Other documents