2. Home
  3. Home security & automation
  4. Security device components
  5. GSMWOND
  6. Wireless Strobe Siren

GSMWOND Wireless Strobe Siren User guide

  • Hello! I am an AI chatbot trained to assist you with the GSMWOND Wireless Strobe Siren User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
Wireless strobe siren
User Guide
2
Welcome
This strobe siren is a wireless siren with the sound volume up to 110dB, and it is
furnished bright LEDs. It is connected to the alarm hub via eV1527 protocol, with
an effective communication range of up to 100 meters without obstacles. If the
electrical power is lost, the backup battery built-in the siren provides power
operation up to 3 hours.
In The Box
Strobe Siren x1
Power Adapter x1
Mounting Screws x2
User Guide x1
Specifications
Power Supply: +12VDC, 1000mA
Backup Battery: 3.7V, 500mAh Lithium Battery
Consumption: <150mA@normal
Alarm Volume: 110dB@powered by 12VDC
Radio Frequency: 433Mhz
Operation Temperature: -10~55℃
3
At a Glance
Hub
1. Strobe (Red)
2. Siren
3. Power port (+12VDC)
4. Tamper switch
5. Battery on/off switch
6. Configuration button
7. Front cover
8. Backplate
9. Indicator (Blue)
6
1
2
3
4
5
8
7
9
9
4
Strobe (Red)
How to connect
to alarm hub
STEP 1. click configuration button three times on your siren, then the
siren goes into the pairing/sniffer mode with light on and ready to connect to
alarm hub.
STEP 2. Trigger your alarm hub an alarm to send a transmission signal to the
siren, then the siren gives a long beep of successful indication.
How to disconnect
with alarm hub
Click configuration buttons more than 10 times until the siren lights
on , then the siren restarts. The factory reset is now completed.
What you see
What it means
Blinking
Alarming ( 150 FPM )
Solid
Pairing/Sniffer mode
/