Step 2 Tap”Add Device”or “+”
Step 3 Choose”Electric Outlet”
1. 1st time to connecting Wi-Fi & phone, make sure the outdoor smart
plug is connected to the same Wi-Fi (2.4G ONLY) as your phone
connected.Dual-band Wi-Fi router- 2.4G & 5G, select 2.4G. After initially
setting, you can access to other Wi-Fi or 4G/3G/2G cellular to control it
2. Phone system: IOS 8.0 or above & Android V4.4 or above.
3. Far away from wifi router or poor wifi will cause wifi connection drop.
Search "Smart Life" on App store, Google Play, or Scan the QR code on
the User Manual and install it.
There are two network connection methods (Normal mode and AP mode).
Normal mode is default. Users could tap the upper right corner to switch
the connection method to AP mode.
Enter mobile number or E-mail address to register an account with
verification code.
Step 1
Set Rapid Flashing Indicator Light (Pairing Mode)
Step 1
Set Slow Flashing Indicator Light (Pairing Mode)
Connect the device
Download the Smart Life APP
Register a Smart life account
1. Smart Life App Connect
Pre-check
Step 2 Tap”Add Device”or “+”Step 3 Choose”Electric Outlet”
Step 4
Add Device-AP Mode Step 5 Enter Wifi
Step 6 Connecting Step 7 Edit Device’s Name
Step 4
Add Device-Normal Mode
Step 5 Enter Wifi Password
Step 6 Connecting
Step 7 Edit Device’s Name
（Ⅰ）Normal mode
（Ⅱ）AP mode
Normal Mode, automatic
connect to your home wifi, then
enter Wi-Fi password
.
After the light turn into rapidly blinking
green lights, continue to long press the
on/off button for 5s or more until the
device’s indicator turn into slowly
blinking green lights(1 times 3 seconds)
For AP Mode, connect to the Wi-Fi
hotspot named ”SmartLife”as shown
in the pics. Note: Some devices might
have different hotspot names.
Long press the on/off button for
5s or more until the device’s
indicator turn into rapidly blinking
green lights (2 times per second)
1. Pls plug the smart
plug into the wall,
and the color is blue
2. Pls long press the on/off
button for 5s or more, the
indicator light will rapidly
1. Pls plug the
smart plug into
the wall, and the
color is blue
2. Pls long press the
on/off button for 5s
or more, the indicator
light will rapidly
flashing.
3. Hold the
on/off button for
5s until the
indicator light
slowly flashing
/
