2. Digital Monitoring Products
  3. SecuritySensorTM Motion

Digital Monitoring Products SecuritySensorTM Motion Quick start guide

  • Hello, I've reviewed the user guide for the SecuritySensor Motion sensor. This document provides instructions on how to install the sensor on flat surfaces or in corners, ensuring optimal coverage. It also outlines the steps to complete the installation using the Virtual Keypad App. I'm ready to answer any questions you have about the installation or use of this device.
  • How to install motion sensor on flat surfaces?
    How to install motion sensor in corners?
    What to do after installing the rest of the sensors?
SecuritySensor™ Motion
Once you have logged into your Virtual Keypad App™
and plugged in your keypad, use this guide
to install your motion sensor.
PLACE THE SENSOR
ON FLAT SURFACES
Remove the double-sided tape backing from the back section of the
sensor. Place the sensor high on a wall (no higher than 8 feet) for the
best coverage.
ON CORNERS
Remove the double-sided tape backing from the angled edges of the
sensor. Place the sensor high in the corner of the room (no higher than 8
feet) for the best coverage.
CONTINUE TO THE NEXT SENSOR
Continue installing the rest of your sensors, then select the Continue
button on the Virtual Keypad App™ to add a user code and complete the
installation.
1
2
QUICK START GUIDE
LT-1482 16325
HAVE QUESTIONS?
See your SecurityGateway™ System User Guide
or contact your security system provider.
/