2
Conversion Lateral Clamp Setup
• Open the Conversion Lateral Clamp by
loosening its ratchet knob.
NOTE: The Conversion Lateral Clamp is designed
to eecvely convert 38mm cart posts to 32mm.
• Aer opening the clamp as per your
requirement, insert it in the rod.
• Aer inserng it into the rod, ghten the
ratchet knob to secure it.
• Loosen the second ratchet knob to open the
second clamp.
• Aer opening the second clamp, insert
another rod into it and properly secure using
the ratchet knob.
• The rods are properly secured to the Lateral
clamp, as shown in the image.
NOTE: Conversion Lateral Clamp for Proaim
Soundchief, Victor V1 & Victor Pro Camera Carts
allows you to fasten the required post easily to
the lateral clamp. Aerward, your gear can
securely be mounted on it without destabilizing
the cart.