tsi 8532 Quick start guide

Type
Quick start guide

This manual is also suitable for

The tsi 8530 8531 8532 DustTrak II is an aerosol monitor designed to measure and log airborne particulate concentrations. It uses a laser photometer to detect particles in real-time, and can measure both mass and number concentrations of particles in the size range of 0.1 to 10 microns. The DustTrak II can be used in a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality assessment. The device features a large, easy-to-read display, and can store up to 10,000 data points.

The tsi 8530 8531 8532 DustTrak II is an aerosol monitor designed to measure and log airborne particulate concentrations. It uses a laser photometer to detect particles in real-time, and can measure both mass and number concentrations of particles in the size range of 0.1 to 10 microns. The DustTrak II can be used in a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality assessment. The device features a large, easy-to-read display, and can store up to 10,000 data points.

www.tsi.com
DustTrak
External Pump
Models 8530EP/8533EP
Quick Start Guide
P/N 6006245, Revision F
April 2023
DustTrak 8530EP Monitor
DustTrak 8533EP Monitor
2
Thank you for purchasing a TSI® DustTrak Model 8530EP/8533EP dust
monitor. This guide will help you quickly connect the external pump to the
DustTrak Model 8530EP/8533EP dust monitor.
More detailed information is in the user manual provided with the
instrument in the carry case. Please refer to the manual if you have
questions on the operation of your new dust monitor.
Setup Instructions
DustTrak 8530EP/8533EP does not come with an internal pump. It must
be connected to an external pump module available from TSI®. The
following parts are needed to set up the DustTrak monitor with the external
pump. Contact TSI® immediately if any of the items are missing or broken.
Qty
Part
Number
Description
Item
1
801675
External Pump Kit
(replacement
available separately
from TSI®)
1
801797
External Pump
Power Cable (to
DustTrak monitor)
1
801798
External Pump
Flow Tube (to
DustTrak monitor)
1
Exhaust Adapter,
DustTrak Monitor
1
8530EP/
8533EP
DustTrak Monitor with
External Pump
Quick Start Guide 3
1. Carefully unpack the DustTrak monitor from the shipping container.
2. Unpack the external pump from the shipping container.
3. Connect one end of the quick connect of the External Pump Flow Tube
to the pump module [1A to 1B].
4. Connect one end of the External Pump Power Cable (to DustTrak
monitor) to the pump module as shown below [2A to 2B].
1A 1B 1A
2B
2A
5. Connect the exhaust adapter to the exhaust of the DustTrak monitor
as shown below.
1D
6. Connect the other end of the quick connect of the External Pump Flow
Tube (to DustTrak monitor) to the exhaust adapter on the DustTrak
monitor [1C to 1D]. Likewise, connect the other end of the External
Pump Power Cable to the DustTrak monitor as shown below
[2C to 2D].
1C
1D
2D
2C
TSI Incorporated Visit our website www.tsi.com for more information.
India Tel: +91 80 67877200
China Tel: +86 10 8219 7688
Singapore Tel: +65 6595 6388
P/N 6006245 Rev. F ©2023 TSI Incorporated Printed in U.S.A.
_____________________
TSI and TSI logo are registered trademarks of
TSI Incorporated in the United States and may
be protected under other country’s trademark
registrations. DustTrak is a trademark of
TSI Incorporated.
7. Setup of the DustTrak monitor with the external pump is
now complete.
C AU TION
The external pump is completely powered by the DustTrak
monitor. DO NOT attempt to power the pump module using an
external power source.
N O TICES
1. The power connector and the flow quick connect “click” when
securely connected. The power connector must be rotated
clockwise past the locking pin.
2. DO NOT hot-plug the External Pump Module when the
DustTrak monitor is turned ON. Always connect the External
Pump module first and then turn the DustTrak monitor ON.
3. TSI® recommends that the DustTrak monitor with the external
pump be operated in the Model 8535 Environmental Enclosure.
4. TSI® recommends that the pump module be operated when
mounted on its feet and avoid operating at other orientations as
much as possible.
5. Pump module and the DustTrak monitor should be at the same
electrical potential.
6. The additional port on the external pump module is where the
pump exhausts the flow. For applications where the DustTrak
monitor is sampling from a chamber or a duct at pressures
significantly different from the ambient, TSI® recommends
plumbing the exhaust of the external pump back in to the
chamber/duct.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

tsi 8532 Quick start guide

Type
Quick start guide
This manual is also suitable for

The tsi 8530 8531 8532 DustTrak II is an aerosol monitor designed to measure and log airborne particulate concentrations. It uses a laser photometer to detect particles in real-time, and can measure both mass and number concentrations of particles in the size range of 0.1 to 10 microns. The DustTrak II can be used in a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality assessment. The device features a large, easy-to-read display, and can store up to 10,000 data points.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI