Classic Exhibits TF-408 Setup Instructions

Type
Setup Instructions
www.classicexhibits.com
Step 1
Page 1 of 2
866.652.2100
© 2008
Order #XXXXX — TF-408 - Aero Table Top Sign Kit #9
NOTE :
PDF copies of your Setup Instructions are available @ www.classicexhibits.com
Use the Search Tool located on the lower left-hand corner of the Classic Home page.
Enter your 5-7 digit Order #. Search for Setup Instructions
search
Steps:
1) Assemble pieces 1 thru 8
and 9 thru 16 together as shown.
2) Attach Base Plates 17, 18, 19 and
20 to assembled verticals 17, 18,
19 and 20 as shown.
Plan View Iso View
3
4
5
6
7
8
10
9
1
2
11
12
13
14
15
16
17
18
19 20
Note: Attaching Graphics
Attach Graphic to Velcro by wrapping
the Graphic over the Top of the Upper Horizontal
and around the Left and the Right of the Verticals
Note: Attaching Graphics
Attach Pillow Case Graphic to
the Assembled Frame
17 18
19 20
** Occasionally spraying a silicon lubricant to the metal connections will make assembly easier.
Using Your Setup Instructions
The Aero TableTop Setup Instructions are created specifically for your configuration.
They include an exploded view of the frame which is sequentially numbered. We encourage
you to study the instructions before attempting to assemble your exhibit.
Push-button connectors and pre-connected horizontal sections make assembly very simple.
No tools are required.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood of
shipping damage.
Connections are made by holding the button
down and sliding the red tube into the opposing tube
until it locks in place.
To disassemble, push button and pull or twist extrusions apart.
Push-Button
Push-Button
6 6
6
6
Numbered Label
Table Top Base Plate Connections
Push-Button
Base Plate Connections are made by holding the button down and sliding the red
tube into the opposing tube on base until it locks in place.
6
6
Base Plate
Frame
Frame
Base Plate
  • Page 1 1

Classic Exhibits TF-408 Setup Instructions

Type
Setup Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI