Classic Exhibits TF-511 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
TF-511
Type
Setup Instructions
www.classicexhibits.com
Step 1
Page 1 of 2
866.652.2100
© 2013
Order #XXXXX — TF-511 Aero Frame
Connections are made by holding the button
down and sliding the red tube into opposing
tube until the connection is made. To disassemble
push button and pull or twist extrusions apart.
Push-Button
Push-Button
66
6
6
Numbered Label
Using Your Setup Instructions
The Aero Overhead Sign Setup Instructions are created specically for your conguration. They include an
exploded view of the frame which is sequentially numbered. We encourage you to study the instructions
before attempting to assemble your exhibit.
Connections are kept very simple: no tools. Everything assembles with push-button
connectors and pre-connected horizontal sections.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood
of shipping damage.
NOTE :
PDF copies of your Setup Instructions are available @ www.classicexhibits.com
Use the Search Tool located on the lower left-hand corner of the Classic Home page.
Enter your 5-7 digit Order #.
Search for Setup Instructions
search
1
2
7
6
4
3
8
9
13
11 12 14
15
10
5
Assemble frame in numerical order as shown.
When assembled
Pillow Case Graphic
Slide pillow case graphic over
frame and zip closed.
Adjustable Foot
  • Page 1 1

Classic Exhibits TF-511 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
TF-511
Type
Setup Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents