Honda 08A02-4E1-100 Installation guide

Brand: Honda

Model: 08A02-4E1-100

Category: Car kits

Type: Installation guide

Honda 08A02-4E1-100 AM/FM CD Tuner is a high-quality audio device designed to enhance your driving experience. With its advanced features and intuitive operation, you can enjoy your favorite music, news, and entertainment while on the road.

The tuner boasts excellent reception capabilities, ensuring crystal-clear sound even in weak signal areas. It features a built-in CD player, allowing you to play your favorite music CDs directly from the device. Additionally, the tuner provides convenient access to AM and FM radio stations, keeping you updated with the latest news, traffic reports, and entertainment programs.

08B60-SCV-1000-91

INSTALLATION

INSTRUCTIONS

Accessory Application Publications No.

Issue Date

DEC 2002

ELEMENT

(DX)

AM/FM CD TUNER

POCKET ATTACHMENT KIT

PARTS LIST

Pocket Attachment Kit

P/N 08B60-SCV-100

Pocket

2 Self-tapping screws,

4 x 12 mm

Radio Attachment Kit

P/N 08B02-SCV-100

Bracket "L"

Bracket "R"

4 Self-tapping screws,

4 x 16 mm

AM/FM CD Tuner

P/N 08A02-4E1-100

AM/FM CD tuner

Owner’s Manual

4 Washer-screw,

5 x 8 mm

TOOLS REQUIRED

Phillips screwdriver

Flat-tip screwdriver

Shop towel

AII 24298

1. Wrap a shop towel around the top of a flat-tip

screwdriver and insert it into the grooves of the

audio panel. Pull the audio panel out toward you to

release the five clips and remove the audio panel.

Take care not to damage the clips and the audio

panel. Disconnect the antenna lead and the 20-pin

connector from the rear of the cover.

3. Push the front of the pocket from above and below

and hold for one minute to fix the shape.

4. Position the audio unit on the pocket and install

the two brackets with the four 5 x 8 mm washer-

bolts and two 4 x 12 mm self-tapping screws.

2. Remove and discard the cover from the audio

panel (four tabs).

2008060K

PUSHDOWN

PUSHUP

POCKET

Customer Information: The information in this

installation instruction is intended for use only by

skilled technicians who have the proper tools,

equipment, and training to correctly and safely add

equipment to your vehicle. These procedures

should not be attempted by “do-it-yourselfers.”

INSTALLATION

2828202K

GROOVES IN

AUDIO PANEL

CLIPS (5)

AUDIO

PANEL

COVER

ANTENNA

LEAD

VEHICLE 20-PIN

CONNECTOR

FLAT-TIP

SCREWDRIVER

2018030K

RETAINING

TAB

COVER

(Not reused.)

RETAINING

TAB

AUDIO

PANEL

2625021K

AUDIO

UNIT

5 x 8 mm

WASHER-

SCREW

4 x 12 mm

SELF-

TAPPING

SCREW

POCKET

Insert the

boss on the

pocket with

this hole.

Use the

upper hole.

5 x 8 mm

WASHER-

SCREW

4 x 12 mm

SELF-

TAPPING

SCREW

Use the

lower

hole

BRACKET

"R"

BRACKET

"L"

Tighten with a screw

while pushing the

front of the pocket in

upward direction.

Installing the Audio Unit and Pocket Assembly

5. While holding the audio unit close to the center

panel opening, plug the vehicle 20-pin connector

and antenna lead into the back of the audio unit.

6. Slide the audio unit and pocket assembly into the

center panel opening and install the four

4 x 16 mm self-tapping screws.

7. Turn the ignition key on, and enter the radio

anti-theft code.

8. Check the operation of the audio unit as described

in the Owner’s Manual supplied.

9. Set the radio clock.

10. Reinstall all removed parts.

11. Put the AM/FM CD Tuner Owner’s Manual in the

glove box.

2828210K

VEHICLE 20-PIN

CONNECTOR

ANTENNA LEAD

4 x 16 mm

SELF-TAPPING

SCREWS

AUDIO

UNIT

Honda 08A02-4E1-100 Installation guide

Brand: Honda

Model: 08A02-4E1-100

Category: Car kits

Type: Installation guide

Download PDF

report

Honda 08A02-4E1-100 Installation guide

Honda 08A02-4E1-100 Installation guide

Related papers

Other documents