Aleratec 350141 Quick start guide

Quick Start Guide

Welcome!

Congratulations on your purchase of an Aleratec

HDD Copy Cruiser IDE/SATA High-Speed WL,

considered by industry experts to be one of

the nest Hard Drive duplicators and sanitizers

available.

The entire Aleratec team is committed to providing

you with courteous service. Our knowledgeable

staff will strive to make owning and operating your

new Aleratec HDD Copy Cruiser IDE/SATA High-

Speed WL a pleasant experience.

This Quick Start Guide will lead you step-by step

through the basic operation procedures of your

HDD Copy Cruiser IDE/SATA High-Speed WL.

For more detailed information on conguring the

HDD Copy Cruiser IDE/SATA High-Speed WL and

applying it’s various capabilities, please refer to the

User Guide on the CD included.

We at Aleratec appreciate your selection of

our product, and wish you great success and

enjoyment of your new HDD Copy Cruiser IDE/

SATA High-Speed WL.

Product Features

• Quicklyclonesupto24orthoroughlysanitizesupto25

HDDssimultaneously

• Computer-connected,real-timeprogressmonitoringandlogging

• Loggingoftheprocessexecutedincludingsanitization

method(7Pass,3-Pass,1-PassOverwrite,SecureErase),

modelname,serialnumbersofdrives,speedandcapacity

• Transferratesupto120MB/S

• Third-partycertified7-Passwipesanitizationfunction;

SecureErase,1-Passor3-PasswithVerify

• LEDindicatorsoneachHDDbaythatvisuallyconfirm

successfulcompletionfortheharddrive

• Supports3.5”IDEHDDsand3.5”/2.5”SATAHDDs

• Supports2.5”IDEHDDswithoptionalAleratecadapters

(P/N350116),notincluded

Key Items on the HDD Copy Cruiser IDE/SATA High-Speed WL

1:5 HDD Copy Cruiser IDE/SATA High-Speed WL

™

Part Number: 350140

1:11 HDD Copy Cruiser IDE/SATA High-Speed WL

™

Part Number: 350141

1:16 HDD Copy Cruiser IDE/SATA High-Speed WL

™

Part Number: 350142

1:24 HDD Copy Cruiser IDE/SATA High-Speed WL

™

Part Number: 350143

Controller:

LCD Display

OK is used to execute a

function, or enter a menu

ESC is used to cancel a

function, or exit a menu

UP arrow is used to scroll

backward through functions

or menus

DOWN arrow is used to

scroll forward through

functions or menus

Controller

Drive LEDs

Display

Panel

Drive Bay

Handle/Tab

Target

Drives

Warning: This product has a manual switchable

power supply. Make sure that the power supply

is set to the proper voltage for your region prior

to pressing the power button on the duplicator.

For the 1:16 HDD Copy Cruiser and 1:24 HDD Copy

Cruiser make sure both power supplies are set to

the proper voltage and plugged in prior to pressing

the power button on the duplicator.

Source

Drive

Included Items

•HDDCopyCruiserIDE/SATAHigh-SpeedWL™

•QuickStartGuide(thisdocument)

•IDEHardDriveTrays

•SATAHardDriveTrays

•StandComponents(350141only)-

6pieceswithscrews

See instructions on page 6 of the User Guide.

•PowerCord(s)

•USB2.0Cable

•UserGuideCD

•RegistrationCard

HDD Cruiser

1-11 ver: 2.33.4

(350140 shown)

Specifications subject to change without notice.

Technical Support Addresses and Phone Numbers

• Bye-mail:[email protected] – Skype:support.aleratec.com

• ByTelephone:+1-818-678-0484 – FAXat:+1-818-678-0483

• TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.holidays.

Pleasetrytocallfromaphonenearyourcomputersystem.

Accessisavailable24hoursaday,365daysayear,via

TheWorldWideWebat:www.aleratec.com

Getting Started

Loading the Hard Drives

1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.

2. TaketheHardDiscDrive(HDD)andalignthedrive’sIDEplugtothelowerrighthandsideofthedrivebay.

3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedoorisclosedit

willpushandplugtheHDDintotheduplicator.

4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbefeltand

heard.

Note:Ifyouareduplicating,thesourceharddiskdrivegoesinthetopbay.

Copy HDD

The“Copy”functionperformsacopyfromasourceHDDtooneormoretargetHDDs.ThetargetHDDsmustbeatleastaslarge

asthesource.TheHDDCopyCruiserIDE/SATAHigh-SpeedWLwillcopyeveryblockofcapacityonthesourceHDD.

1. LoadthesourceHDDandthetargetHDDsintotheHDDCopy

CruiserIDE/SATAHigh-SpeedWL.Thesystemwillauto-detect

theharddrives.Afterthedriveshavebeendetected,ascreen

similartotheonetotherightwillbedisplayed.

Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.

2. PressOKtostartcopying.Thesystemwillauto-detecttheharddrives.Thefollowinginformationwillbedisplayed.



3. DuringthecopyprocesstheHDDCopyCruiserIDE/SATAHigh-SpeedWL

willdisplayprogressinformation.

Theamountofdataremainingtobetransferred(showningigabytes),

andtimewillbedisplayedasthepercentageofcompletionincreases.



Note: Thecopyingspeed,capacityanddurationmayvaryfromone

harddrivetoanother.

4. Onceduplicationiscomplete,ajobstatusscreenwillbedisplayed.



Please refer to the User Guide found on the disc for

more detailed information.



ESC

2014/10/07 10:50

1. Copy



ESC

Copy x 11 50.9 G

7:35 26% 13.5 G



ESC

Pass: 1 Fail: 0

Time: 20:18



ESC

Copy

Searching Source



ESC

Copy

Analyzing Source



ESC

Analyzing Source

Partition #1 25%



ESC

Copy 50.9G

1 Ready

Page is loading ...

Aleratec 350141, 350142, 350143 Quick start guide

Related papers

Other documents