OneTouch Blood Glucose Meter Blood Glucose Monitoring System User manual

Brand: OneTouch

Model: Blood Glucose Meter Blood Glucose Monitoring System

Type: User manual

Blood Glucose Monitoring System

Sistema de supervisión de glucosa en sangre

Just the Basics of Testing

Sólo lo básico para la realización de pruebas

Owner’s Booklet

Manual del propietario

DCO_06397301A_OTUM_COV.qxd 05/04/06 6:11 PM Page c1

OneTouch

UltraMini

™

Blood Glucose Monitoring System

Owner’s Booklet

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:15 AM Page i

Welcome to the OneTouch

UltraMini

™

family!

OneTouch

is committed to creating a world without limits for people with

diabetes.

The OneTouch

UltraMini

™

Meter makes it simple to get a test result and

review past results. This owner’s booklet will help you learn how to use

your meter properly. Please read it carefully.

If you need assistance, please contact LifeScan Customer Service at

1 800 227-8862 (available 24 hours a day, seven days a week). Please

also visit www.LifeScan.com for more information.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:15 AM Page ii

iii

Setting up your system..................................................................pg. 2

arting the test process...........................................................................

pg. 7

Getting a blood sample.................................................................pg. 10

Applying blood and reading results...............................................pg. 22

Reviewing past results...................................................................pg. 27

Control solution testing.................................................................pg. 28

Caring for your system...................................................................pg. 33

Understanding error and other messages......................................pg. 37

Detailed information about your system........................................pg. 43

Index.............................................................................................pg. 47

Table of contents

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:15 AM Page iii

Before you begin

Before using this product to test your blood glucose, carefully read this booklet and the

inserts that come with the OneTouch

Ultra

Test Strips and OneTouch

Ultra

Control

Solution. Take note of warnings and cautions throughout this booklet, which are identified

with

Many people find it helpful to practice the test with control solution before testing

with blood for the first time. See pages 28–32 in the Control solution testing section.

Intended use

The OneTouch

UltraMini

™

Blood Glucose Monitoring System is intended to be used for the

quantitative measurement of glucose (sugar) in fresh capillary whole blood. The OneTouch

UltraMini

™

System is intended for use outside the body (in vitro diagnostic use) by people

with diabetes at home and by healthcare professionals in a clinical setting as an aid to

monitor the effectiveness of diabetes control. It should not be used for the diagnosis of

diabetes or for testing newborns.

Test principle

Glucose in the blood sample mixes with special chemicals in the test strip and a small

electric current is produced. The strength of this current changes with the amount of glucose

in the blood sample. Your meter measures the current, calculates your blood glucose level,

displays the result, and stores it in its memory.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:15 AM Page iv

The OneTouch

UltraMini

™

Blood Glucose Monitoring System

To test with the OneTouch

UltraMini

™

System,

you will need the following:

a. OneTouch

UltraMini

™

Meter (battery included)

b. OneTouch

Ultra

Control Solution

c. OneTouch

Lancing Device

If another type of lancing device was

included, see the separate instructions that

came with that lancing device.

d. OneTouch

AST

™

Clear Cap

e. OneTouch

UltraSoft

Sterile Lancets

f. Carrying Case

g. You will also need OneTouch

Ultra

Test Strips.

Some kits do not include strips.

Strips are sold separately.

Documents in your kit include this owner’s

booklet, a quick start guide, a quick refer-

ence guide, a control solution insert and a

warranty registration card.

If any items are missing from your kit, call

LifeScan Customer Service at 1 800 227-8862.

WARNING: Keep the meter and testing

supplies away from young children. Small

items such as the battery door, battery, test

strips, lancets, protective disks on the

lancets and control solution vial cap are

choking hazards.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 1

TEST STRIP

Edge to

apply sample

Confirmation

window

Contact bars

Insert into

test port

Getting to know your OneTouch

UltraMini

™

Blood Glucose Meter and test strips

Setting up your system

FRONT

BACK

Battery door

Meter battery

Up and down buttons

Turns the meter on or off

Select or change information

Test port

Insert test strip

here to turn meter

on for testing

mg/dL is the pre-set unit of measure

Display

with battery door

open

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 2

Turning your meter on

To perform a test, insert a test strip as far as it will

go. The display will turn on and the meter will briefly

perform system checks. Or, to change the time and

date, start with the meter off, then press and

hold

▼

for five seconds until the start-up test screen

appears. After the test screen, the pre-set time and

date will appear on the display. Or, if you want to

turn the meter on to review past results, start with

the meter off, then press and release

▼

Every time you turn your meter on, a start-up test

screen will appear for two seconds. All segments of the display should appear briefly on

the test screen to tell you that the meter is working properly. To check that all display

segments are working, as soon as the start-up test screen appears, press and hold ▲ to

keep the test screen display on. Release ▲ to proceed to the next step.

If the meter does not power on, try changing the meter battery. See pages 35–36.

Turning your meter off

There are several ways to turn your meter off:

• Press and hold

▼

for two seconds, when reviewing past results.

• Your meter will turn off by itself if left alone for two minutes.

• Before or after completing a test, remove the test strip.

Setting up your system

CAUTION: If any information is

missing from the start-up test

screen, there may be a problem

with the meter. Call LifeScan

Customer Service at 1 800 227-8862.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 3

Setting up your system

Setting the time and date

Your OneTouch

UltraMini

™

Meter comes with the time, date and unit of measure

pre-set. Before using your meter for the first time or if you change the meter battery, you

should check and update the time and date. Make sure you complete steps 1 to 6 below

to ensure your desired settings are saved.

Step 1

Turn the meter on, see page 3

After the test screen, the pre-set time and date will

appear on the display for five seconds.

The hour will now start flashing.

NOTE: If a setting does not need to be updated, simply wait five seconds. The meter

display will automatically advance to the next setting.

Step 2

Set the hour and

“AM” or “PM”

With the hour flashing on the display, press and release ▲ or

▼

to go forward or backward

one hour. To move faster, hold the ▲ or

▼

buttons down. Note that “AM” or “PM” is linked

WARNING: If your display shows mmol/L rather than mg/dL, contact LifeScan Customer Service

at 1 800 227-8862. You cannot change the unit of measure. Use of the wrong unit of measure may

cause you to misinterpret your blood glucose level, and may lead to incorrect treatment.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 4

Setting up your system

to the hour and changes when you pass 12:00. When the correct hour appears on the

display, wait five seconds. Your entry will be saved and you will move to the next setting.

Check AM/PM. If not correct, continue to press ▲ or

▼

until the hour and

“AM” or

“PM” are correct.

The minutes will now start flashing.

Step 3

Set the minutes

Press ▲ or

▼

to change the minutes. When you have

the correct minutes on the display, wait five seconds

to move to the next setting.

The year (last two digits only), month and day appear on the display and the year flashes.

Step 4

Set the year

Press ▲ or

▼

to change the year. When you have the

correct year on the display, wait five seconds to move

to the next setting. The month will now start flashing.

You can ONLY change “AM” and “PM” when you

pass 12:00. Make sure “AM” or “PM” is correct

while you are setting the hour.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 5

Setting up your system

Step 5

Set the month

Press ▲ or

▼

to change the month. When you have

the correct month on the display, wait five seconds to

move to the next setting.

The day will now start flashing.

Step 6

Set the day

Press ▲ or

▼

to change the day. When you have the

correct day on the display, wait five seconds to move

to the next screen.

Your time and date settings will be displayed for five

seconds. After the five seconds, the settings will be

saved and the meter will then turn off.

If you want to adjust your settings, press ▲ or

▼

while

the time and date are still on the display. You will be

returned to the first set-up screen where you can begin

with the hour.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 6

Have these things ready when you test your blood glucose level:

• OneTouch

UltraMini

™

Meter

• OneTouch

Ultra

Test Strips

• Lancing device

• Sterile lancets with protective disks

• OneTouch

Ultra

Control Solution

NOTE:

• Use only OneTouch

Ultra

Test Strips with your OneTouch

UltraMini

™

Meter.

• Make sure your meter and test strips are about the same temperature before you test.

• Testing must be done within the operating temperature range (43–111°F). For the most

accurate results, try to test as close to room temperature (68–77°F) as you can.

• You can perform a blood glucose test while your OneTouch

UltraMini

™

Meter is inside its case.

Step 1

Check the code on the test strip vial before inserting the strip

Code numbers are used to calibrate your meter with the test strips you are

using to obtain accurate test results. You must code the meter before using it for the first

time and then every time you change to another vial of test strips.

Starting the test process

CAUTION: If you cannot test due to a problem with

your testing supplies, contact your healthcare

professional or LifeScan Customer Service at

1 800 227-8862. Failure to test could delay treatment

decisions and lead to a serious medical condition.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 7

After the start-up test screen appears, the meter will

display the code from your last test. If a constant and

a flashing “––” appear instead of a code number, such

as when you are first using the meter, follow the

instructions on the next page to change to a numerical code.

Starting the test process

æ CAUTION: OneTouch

Ultra

Test Strips are for single use only. Never

re-use a strip that had either blood or control solution applied to it.

Step 2

Insert a test strip to turn on the meter

Start with the meter off. If you have turned the meter on to change

settings or review past results, turn it off. Remove a test strip from its

vial. With clean, dry hands, you may touch the test strip anywhere

on its surface. Do not bend, cut or modify the test strips in any way.

Use each test strip immediately after removing it from the vial.

Hold the meter as shown and insert the test strip into the test port.

Make sure the three contact bars are facing you. Push the strip in

as far as it will go. Do not bend the strip.

CAUTION: The test strip vial contains drying agents that are harmful if inhaled or

swallowed and may cause skin or eye irritation.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 8

Step 3

Match the code on the meter with the code on the test strip vial

If the code on the meter does not match the code on the test strip

vial, press ▲ or

▼

to match the code number on the test strip vial.

The new code number will flash on the display for three seconds,

and then stay constant for three seconds.

The display will advance to the screen with the flashing blood drop

icon

If the codes already match, wait three seconds. The

display will advance to the screen with the flashing

blood drop icon

The meter is now ready to perform a blood glucose test.

NOTE:

• If the screen with the flashing blood drop

icon

appears before you are sure the codes

match, remove the test strip, wait until the meter turns off, then re-start from step 1, see

page 7.

• If you press ▲ by mistake so that the control solution test symbol CtL appears on the

display, press ▲

again to change it back to the screen with the flashing blood drop icon

Starting the test process

æ CAUTION: Matching the code on the meter and the code on the test strip vial is essential to

obtain accurate results. Each time you test, check to make sure the code numbers match.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 9

Getting a blood sample

Overview of the OneTouch

Lancing Device

NOTE: If you do not

have a OneTouch

Lancing Device,

please refer to the

instructions that

came with your

lancing device.

OneTouch

UltraSoft

Sterile Lancet

Blue cap* (for fingertip sampling)

Depth indicator

*The blue cap and OneTouch

AST

™

Clear Cap are also used for depth adjustment

Cocking control

Release button

OneTouch

AST

™

Clear Cap*

(for alternate site sampling)

Lancet point

Protective disk

æ CAUTION: To reduce the chance of infection:

• Make sure to wash the puncture site with soap and water

before sampling.

• Never share a lancet or a lancing device with anyone.

• Always use a new, sterile lancet—lancets are for single use only.

• Keep your meter and lancing device clean. See page 34.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 10

Getting a blood sample

Choosing the right sampling site at the right time

The OneTouch

UltraMini

™

Meter allows you to sample blood from your fingertip,

forearm or palm. Forearm and palm sampling is also referred to as “alternate site

testing” (AST). At times, results obtained at the forearm or palm may be different

from a fingertip measurement. Talk to your healthcare professional before you

begin using your forearm or palm for sampling.

If you are testing:

Routinely before meals

Prior to or more than two hours after:

• a meal

• a rapid-acting insulin injection or insulin pump bolus

• exercise

When your blood glucose is changing rapidly, such as:

• within two hours after a meal

• within two hours after a rapid-acting

insulin injection or insulin pump bolus, or

• during or within two hours after exercise

When you are concerned about the possibility of

hypoglycemia (low blood sugar)

Fingertip

Fingertip,

forearm, or

palm

Use blood

sample from your:

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 11

Getting a blood sample

æ CAUTION: Do not test on your forearm or palm when:

• You think your blood glucose is rapidly falling, such as within two hours of

exercise or a rapid-acting insulin injection or insulin pump bolus. Testing with a

fingertip sample may identify hypoglycemia or an insulin reaction sooner than

testing with a forearm or palm sample.

• It has been less than two hours after a meal, a rapid-acting insulin injection or

insulin pump bolus, physical exercise, or you think your glucose level is changing

rapidly.

• You are concerned about the possibility of hypoglycemia or an insulin reaction,

such as when driving a car. This is especially important if you suffer from

hypoglycemia unawareness (lack of symptoms to indicate an insulin reaction).

Remember: Consult with your healthcare professional before using your forearm or

palm for testing.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 12

Getting a blood sample

Choose a different puncture site each time you test. Repeated punctures in the same

spot may cause soreness and calluses.

If bruising occurs at an alternate site or you have difficulty getting a sample, consider

sampling from a fingertip instead. You may want to review the choice of sites with your

healthcare professional.

Preparing your sample site

Before you test your blood glucose, wash your hands and forearm

(if applicable) thoroughly with warm, soapy water. Rinse and dry.

Lancing and sampling from your fingertip

Step 1

Remove the blue cap by snapping it off

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 13

Getting a blood sample

Step 2

Insert a sterile lancet into the OneTouch

Lancing Device

Insert the lancet into the holder and push

in firmly. Twist the protective disk until it

separates from the lancet and save the disk

for later use. Do not twist the lancet.

Step 3

Replace the blue cap by snapping it back on

Step 4

Adjust the depth setting

The OneTouch

Lancing Device has nine puncture depth settings,

numbered 1 through 9. The smaller numbers are for a shallower

puncture, and the larger numbers are for a deeper puncture.

Shallower punctures work for children and most adults. Deeper

punctures work well for people with thick or callused skin. Twist the

blue cap until the correct setting appears.

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 14

Getting a blood sample

Step 5

Cock the OneTouch

Lancing Device

Slide the cocking control back until it clicks. If it does not click, it

may have been cocked when you inserted the lancet.

Step 6

Puncture your finger

Hold the OneTouch

Lancing Device firmly against the side of

your finger. Press the release button. Remove the OneTouch

Lancing Device from your finger.

NOTE: A shallower puncture may be less painful. Try a shallower setting first and

increase the depth until you find the one deep enough to get a blood sample of at

least one microliter ( actual size).

DCO_06397301A_OTUM_OB_EN.qxd 05/05/06 9:16 AM Page 15

Page is loading ...

OneTouch Blood Glucose Meter Blood Glucose Monitoring System User manual

OneTouch Blood Glucose Meter Blood Glucose Monitoring System User manual

OneTouch Blood Glucose Meter Blood Glucose Monitoring System User manual

Related papers

Other documents