Kinetik AG-607 Quick start guide

AG-607
Kinetik
Brand
Kinetik
Model
AG-607
Type
Quick start guide

This manual is also suitable for

Quick Start Guide
AG-607
Blood Glucose
Monitoring System
Wash and dry hands
—
Using warm water
may help
the blood flow.
1
Insert test strip into strip port with
contact bars facing toward you.
Ensure that the device is off
when inserting the test strip.
The device will automatically
turn on and be ready for testing
once test strip has been inserted.
2
Prepare the lancing device.
Ensuring to insert the lancet
firmly into lancing cup holder
and set the lancet
level appropriately.
3
Obtain a blood sample.
Hold lancing device
against the site
to be lanced and then
press the release button
to puncture.
4
Squeeze lancet site
until a drop of blood forms.
Wipe away the first blood
drop and then squeeze until
a second small blood
drops forms.
5
Hold the device at a 45° angle.
Then gently apply the blood
sample to the underside of
the test strip at the bottom -
where the absorbent hole
is located.
6
Remove lancet site from the test strip
when the 5 second countdown begins.
The test result will appear on meter
after countdown.
The device will turn off 30 seconds
after removing test strip.
7
Kinetik AG-607 UK QS Guide 20190108
for more information visit :
kinetikwellbeing.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Kinetik AG-607 Quick start guide

AG-607
Kinetik
Brand
Kinetik
Model
AG-607
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents